PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
High Precision Resistor Thin Film Network,
Surface Mount Leadless Arrays
FEATURES
• Gold terminations over nickel barrier
• High stability passivated nichrome resistive layer
• Tight TCR (10 ppm/°C) and TCR tracking
(to 2 ppm/°C)
Product may not
be to scale
• Very low noise and voltage coefficient < - 30 dB,
0.1 ppm/V typical
• Ratio tolerance to 0.02 %
• Material categorization: For definitions of compliance
please see
www.vishay.com/doc?99912
PR arrays can be used in most applications requiring a
matched pair (or set) of resistor elements. The networks
provide 2 ppm/°C TCR tracking, a ratio tolerance as tight as
0.02 % and outstanding stability. They are available in
1 mm, 1.35 mm and 1.82 mm pitch.
SCHEMATIC
Schematic A: Independent Resistors
Electrical Diagram
R
1
R
2
R
7
R
8
Number of Resistors: 2 to 8
R
1
= R
2
= .... R
8
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 08-Jan-13
SPECIFICATIONS
Passivated nichrome
-
100
to 200 k (PR100)
100
to 300 k (PR135)
100
to 1 M (PR182)
± 10 ppm/°C
± 2 ppm/°C
± 0.1 % to ± 10 %
± 0.02 % to ± 0.1 %
100 mW (PR100)
125 mW (PR135)
200 mW (PR182)
-
-
-
0.1 ppm/V
35 V (PR100)
75 V (PR135)
100 V (PR182)
- 55 °C to + 125 °C
- 55 °C to + 150 °C
- 30 dB
-
-
-
CONDITIONS
-
-
-
- 55 °C to + 125 °C
- 55 °C to + 125 °C
-
-
At + 70 °C
-
-
-
-
-
-
-
-
-
-
-
Document Number: 53039
1
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS
in mils
E
DIMENSION
A
B
C
PR100
64 ± 6
17
30
10
PR135
72 ± 6
20.3
43.3
10
PR182
118 ± 6
23.6
61.8
10
A
D
B
E (1)
C
F
G
E = (N x F) ± 8 E = (N x F) ± 8 E = (N x F) ± 8
40
15
53.3
15
71.8
15
F
G
D
Notes
(1)
Where “N” = Number of resistors
• ± 2 mils unless specified
MECHANICAL SPECIFICATIONS
Substrate
Technology
Film
Terminations
Alumina 99.6 %
Thin Film
Passivated nichrome
Solderable gold (Au) over nickel
DERATING CURVE
Precent of Rated Power
100
80
60
40
20
0
0
70
155
Ambient Temperature °C
PACKAGING
Waffle-pack or tape and reel
MARKING
On the primary package, printed information includes Vishay trademark series and model, schematic number of resistors, ohmic
value, absolute tolerance, ratio tolerance, type of termination
Revision: 08-Jan-13
Document Number: 53039
2
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
PR100, PR135, PR182
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: PR100A41002BBGTS
P
R
1
0
0
A
4
1
0
0
2
B
B
G
T
S
GLOBAL
MODEL
PR100
PR135
PR182
SCHEMATICS
A
= Isolated
resistors
NUMBER
OF
RESISTORS
2
3
4
5
6
7
8
RESISTANCE
First 3 digits are
significant figures
and the last digit
specifies
the
number of zeros
to follow.
Example:
1000 = 100
1001 = 1000
ABSOLUTE
TOLERANCE
B
= 0.1 %
C
= 0.25 %
D
= 0.5 %
F
=1%
G
=2%
J
=5%
K
= 10 %
RATIO
TOLERANCE
P
= 0.02 %
(1)
W
= 0.05 %
(2)
B
= 0.1 %
C
= 0.25 %
D
= 0.5 %
F
=1%
TERMINATION
G
= Wraparound
Au over Ni
termination
e4 epoxy
solderable
PACKAGING
WS
= WAFFLE
100 min.,
1 mult
TS
= TAPE
AND REEL
(3)
100 min.,
1 mult
T0
= 100 min.,
100 mult
T1
= 1000 min.,
1000 mult
T3
= 300 min.,
300 mult
T5
= 500 min.,
500 mult
Historical Part Number example: PR100A41002BBGT (for reference purposes only)
PR100
SERIES
A
SCHEMATIC
4
NUMBER
1002
RESISTANCE
B
ABSOLUTE
TOLERANCE
B
RATIO
TOLERANCE
G
TERMINATION
T
PACKAGING
Notes
(1)
> 1 k, max. 4 resistors
(2)
> 100
,
up to 8 resistors
(3)
Please refer to below table for tape and reel availability
TAPE AND REEL AVAILABILITY
NUMBER OF RESISTORS
2
3
4
5
6
7
8
Note
•• Not available, consult factory
PR100
Available
••
Available
••
Available
••
Available
PR135
Available
Available
Available
Available
Available
Available
••
PR182
Available
••
Available
Available
••
••
••
Revision: 08-Jan-13
Document Number: 53039
3
For technical questions, contact:
thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Real-time operating system RTOS
京公网安备 11010802033920号
EEWORLD
