The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW
Micro-USB connectors meeting requirements of USB 2.0 Standard
ZX Series
Note: Contact us to ascertain whether a TID number has
been acquired for an individual product.
sOverview
Extremely small high reliability connectors complying with physical,
electrical and environmental requirements of Micro-USB standard
(USB 2.0).
Receptacles and plugs are available in a wide variety of mounting
and termination configurations, permitting their use in various
applications.
Drop-in
(Mid-mount)
Reverse
(Top mount)
sFeatures
1. Size reduction
Compared with the standard Mini-B connectors, the size of ZX
connectors is reduced by approximately 60% while still allowing a
high-speed data transfer of 480 Mbps, specified in USB 2.0.
Standard
(Bottom mount)
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in standard,
mid-mount and reverse mounting styles.
SMT and through-hole (shell) PC board terminations
3. Plug styles
Corresponding to the receptacle styles, two interface configurations:
Micro-B and Micro-A, with direct wire or PCB wire soldering.
Several plug styles can be used for data transmission, earphone or
charging applications.
USB 2.0 Hi-Speed (480 Mbps)
Eye pattern measurement results:
Measured with USB 2.0 cable 2.4 m long
4. High durability
Unique contact and lock configuration assures high durability while
(when mated with corresponding HRS connector) is confirmed by a
definite tactile sensation
200 mV/div
TP2
500ps/div
2010.8
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
sSpecifications
1 A (per contact) or
Ratings
Current rating
1.8 A (contacts No. 1 and 5) and
0.5 A (contacts No. 2, 3, and 4)
Item
1. Contact resistance
2. Withstanding voltage
3. Capacitance
4. Durability
5. Total insertion/removal force
30 mø max.
No flashover or insulation breakdown
2 pF max.
Contact resistance: Rise from initial value of 10 mø max.
Insertion force: 35 N max., Removal force: 8 N min.
Specification
100 mA
100 V AC / 1 minute
Between adjacent contacts at 1,000 Hz (AC voltage)
10,000 cycles
Mated with corresponding connector
Voltage rating
Operating temperature range
Storage temperature range
Conditions
30 V AC
-30°C to +85 °C (Note1)
-30 °C to +85°C
Note1: Includes temperature rise caused by current flow.
Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
sMaterials
qReceptacles
Part
Insulator
Contacts
Shell
Material
LCP
Copper alloy
Stainless steel
Finish
Micro-B: Black, Micro-AB: Gray
Selective gold plated
Tin alloy plating
Remarks
UL94V-0
---------------
---------------
qPlugs
Part
Insulator
Contacts
Lock spring
Shell
Material
Synthetic resin
Copper alloy
Stainless steel
Stainless steel
Finish
Micro-A: White, Micro-B: Black
Selective gold plated
Remarks
UL94V-0
---------------
---------------
---------------
ZX
10's: Right-angle PCB wire, SMT
20's: Straight, PCB wire
40's: Direct wire
60's: Right-angle, PCB wire
80's: Cradle SMT
Standard (Bottom mount)
Standard (Bottom mount) through hole
Reverse (Top mount)
Reverse (Top mount) through hole
Drop-in (Mid-mount)
Micro-A
Micro-B
Micro-AB
5
Receptacle- Male
Plug – Female
SMT
Through hole (solder tab length: 0.8mm)
Assembly (Insulator/contact/lock)
Cover (Note 1)
---------------
Nickel plated or unfinished
sOrdering
information
qReceptacles
1
Series name
2
Termination style
ZX 62 RD - B - 5 P
*
8
1
2
3
4
5
6
7
8
3
Board mounting style
(Receptacles)
qPlugs
ZX 40 - B - 5 S
*
- UNIT
1
2
4
5
6
7
9
4
Mating side configuration
5
Number of contacts
6
Contact type
7
Serial No.
8
Shell termination style –
ZX 40 - B - SLDA
1
2
4
9
Blank
D
R
RD
M
A
B
AB
P
S
Blank
8
UNIT
SLD*
sProduct
Styles Table
Interface
Micro-A
Receptacle
Plug
Receptacles
9
Components-plugs
Note 1: Classifiers such as A, B, and C are entered for *.
Micro-B
Micro-AB
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
sConfigurations
Mating side
Mounting, termination
Application
configuration
styles/wire attachment
Part Number
3D Image
Page
SMT
Standard
ZX62-B-5PA(11)
4
SMT
+
DIP
Micro-B
Reverse
ZX62D-B-5PA8
4
SMT
ZX62R-B-5P
5
R e c e p t a c l e s
Drop-in
SMT
ZX62M-B-5P(02)
5
SMT
Standard
ZX62-AB-5PA(11)
6
SMT
+
DIP
Micro-AB
ZX62D-AB-5P8
6
SMT
Reverse
ZX62R-AB-5P
7
SMT
+
DIP
ZX62RD-AB-5P8
7
Direct wire soldering
Data
PCB wire soldering
(right angle, through hole)
Assembly
:ZX40-B-5S-UNIT(12)
(insulator/contacts/lock)
Cover-top
:ZX40-B-SLDA
Cover-bottom
:ZX40-SLDB
Assembly
:ZX10-B-5S-UNIT(12)
(insulator/contacts/lock)
Cover-top
:ZX10-B-SLDA
Cover-bottom
:ZX10-SLDB(3.3)
9 and 10
11 and 12
P l u g s
Micro-B
Earphone
PCB wire soldering
Assembly
:ZX20-B-5S-UNIT(12)
(insulator/contacts/lock)
(straight, through hole)
Cover
:ZX20-B-SLDC
PCB wire soldering
(SMT)
Assembly
:ZX64-B-5S-UNIT(14)
(insulator/contacts/lock)
Cover-top
:ZX64-B-SLDA
Cover- bottom
:ZX64-SLDB
Assembly
:ZX64-B-5S-UNIT(14)
(insulator/contacts/lock)
Cover
:ZX64-B-SLDC
Assembly
:ZX40-A-5S-UNIT
(insulator/contacts/lock)
Cover-top
:ZX40-A-SLDA
Cover- bottom
:ZX40-SLDB
13
Charging
14 and 15
Charging
PCB wire soldering
(SMT)
Earphone
14 and 16
Micro-A
Data
Direct wire soldering
17 and 18
C r a d l e s
ZX80-B-5S
Micro-B
Cradle
With lock
19
SMT
+
DIP
ZX80-B-5SA
Without lock
19
Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers.
Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors.
Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the
Materials (Page 2) for correct colors.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
sReceptacles
q
Micro B - Standard (Bottom mount), Shell SMT
Part Number
ZX62-B-5PA(11)
CL No.
242-0033-8-11
Packaging
3,500 pieces per reel
sRecommended
PCB mounting pattern
8.3
4.1
2.6
No.1
NO CONDUCTIVE
TRACES
1.6
1.3
0.4
No.5
1.35
1.9
3.35
7.5
1.45
0.5
4.3
6.2
9.8
0.6
5
PCB EDGE
No.1
7.9
No.5
2.5
2.15
q
Micro B - Standard (Bottom mount), Shell through hole
Part Number
ZX62D-B-5PA8
CL No.
242-0056-3
Packaging
2,000 pieces per reel
sRecommended
PCB mounting pattern
1.25(LAND)
0.85(TH)
R0
.52
4.85
2.6
5(L
0.2
0.1
0.65
0.4
AN
D)
No.1
1.05(LAND)
0.65(TH)
No.5
1.35
R0.325(TH)
3.35
R0.5(LAND)
2.9
7.5
2.75
PCB EDGE
No.1
4.85
7.2
No.5
0.8
R0.325(TH)
0.5(TH)
4.1
5.2
7.2
9.4
1.3
0.5
1.5(TH)
1.9
2.5
2.15
2.9
All dimensions: mm
4
2.8
NO CONDUCTIVE TRACES
(TH)
.3
R0
0.6
2.8
All dimensions: mm
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
[size=14px] My question is this: there is a system with the structure of: reader, coil, coil, transponder; the information between the reader and the transponder is transmitted by the coupling coil; I...
Traditional water supply metering operations are usually carried out by sending people from various management departments to the meter installation site to read the meter. Due to the wide range of us...
I recently made a frequency meter program to count input signals. As a result, I found through an oscilloscope that the signal source was not a standard square wave, which led to inaccurate counting v...
[code]#include
void PLLSet() { unsigned long ulRCC,ulDelay; ulRCC=SYSCTL_RCC_R; //Read the current value of RCC register ulRCC|=111; //Bypass PLL ulRCC=~(122); //Do not use system divider SYSCTL_RCC_R...
The number of foreign engineers I have come into contact with, if we take the country of permanent residence and permanent residency as the standard, is about 30. I talked to them about various things...
introduction
According to the China Fire Statistics Yearbook, electrical fires accounted for more than 30% of fire accidents in the past decade, and the trend is increasing year by year. They ...[Details]
1. Multi-channel DAC technology bottleneck
Currently,
the development of multi-channel DAC technology focuses on two core challenges.
First, industrial applications urgently ...[Details]
1. Fault phenomenon and cause analysis
1. During the operation of the equipment, the expansion sleeve is subjected to a large torque, and the mating surfaces of the shaft and the sleeve move...[Details]
In the field of communications power supplies, AC/DC rectifier power supplies are called primary power supplies or basic power supplies, while DC/DC converters are called secondary power supplies. ...[Details]
New version helps developers build secure and trustworthy embedded systems
Shanghai, China—August 21, 2025—
QNX, a division of BlackBerry Ltd., today announced the release of QNX...[Details]
Smartphones can be incredibly unintelligent. For example, consider an office full of people, each absorbed in their work. Suddenly, the silence is broken by a burst of loud pop music. A colleague's...[Details]
01. Introduction
As in-vehicle networks migrate from the CAN
bus
to
Ethernet
, traditional millisecond-level synchronization accuracy can no longer meet the requirements of mul...[Details]
According to foreign media reports, Apple is secretly evaluating several artificial intelligence hardware concepts, including smart home displays, security devices and a desktop robot, of which the...[Details]
New energy electric vehicles are energy-saving, environmentally friendly, have low operating costs, and enjoy strong support from national policies. With the growth in sales of new energy electric ...[Details]
introduction
At present, all major countries in the world are vigorously developing marine affairs. However, there are various uncertainties and unknown factors in the ocean. Underwater robots...[Details]
According to reports from Xinhua News Agency, Tianjin University official website and other media, Chinese researchers have recently broken through the bottleneck of energy density and application ...[Details]
Do electric cars emit radiation? The answer is: yes! In fact, electromagnetic radiation is ubiquitous in our lives. The Earth itself is a large magnetic field. The interaction between electric and ...[Details]
The automotive industry is hurtling toward a future that will transform transportation just as electricity transformed the way we light the world. Electric and self-driving cars will permanently ch...[Details]
Quantum dots are a cutting-edge nanomaterial. Using quantum dot materials in backlight sources has four unique advantages:
1. Longer lifespan - Since mature inorganic materials are used, the f...[Details]
On August 14, Chinese researchers broke through the bottleneck of energy density and application performance of existing traditional lithium-ion batteries and developed soft-pack batteries with an ...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
