A3P125-FVQG100 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Programmable logic devices> Programmable logic> A3P125-FVQG100

A3P125-FVQG100: DescriptionField Programmable Gate Array, 3072 CLBs, 125000 Gates, 350MHz, CMOS, PQFP100, 14 X 14 MM, 1 MM HEIGHT, 0.50 MM PITCH, GREEN, VQFP-100; CategoryProgrammable logic devices Programmable logic; File Size6MB，206 Pages; ManufacturerMicrosemi; Websitehttps://www.microsemi.com; Environmental Compliance

Download Datasheet Parametric View All

A3P125-FVQG100 Overview

Field Programmable Gate Array, 3072 CLBs, 125000 Gates, 350MHz, CMOS, PQFP100, 14 X 14 MM, 1 MM HEIGHT, 0.50 MM PITCH, GREEN, VQFP-100

A3P125-FVQG100 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	Microsemi
package instruction	TFQFP,
Reach Compliance Code	compliant
maximum clock frequency	350 MHz
JESD-30 code	S-PQFP-G100
JESD-609 code	e3
length	14 mm
Humidity sensitivity level	3
Configurable number of logic blocks	3072
Equivalent number of gates	125000
Number of terminals	100
Maximum operating temperature	70 °C
Minimum operating temperature
organize	3072 CLBS, 125000 GATES
Package body material	PLASTIC/EPOXY
encapsulated code	TFQFP
Package shape	SQUARE
Package form	FLATPACK, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Celsius)	260
Programmable logic type	FIELD PROGRAMMABLE GATE ARRAY
Certification status	Not Qualified
Maximum seat height	1.2 mm
Maximum supply voltage	1.575 V
Minimum supply voltage	1.425 V
Nominal supply voltage	1.5 V
surface mount	YES
technology	CMOS
Temperature level	COMMERCIAL
Terminal surface	MATTE TIN
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	40
width	14 mm
Base Number Matches	1

Preview

Download Datasheet

View All

v1.1

ProASIC3 Flash Family FPGAs

with Optional Soft ARM

Support

Features and Benefits

High Capacity

• 15 k to 1 M System Gates

• Up to 144 kbits of True Dual-Port SRAM

• Up to 300 User I/Os

Reprogrammable Flash Technology

•

130-nm, 7-Layer Metal (6 Copper), Flash-Based CMOS Process

Live at Power-Up (LAPU) Level 0 Support

Single-Chip Solution

Retains Programmed Design when Powered Off

High Performance

• 350 MHz System Performance

• 3.3 V, 66 MHz 64-Bit PCI

†

In-System Programming (ISP) and Security

• Secure ISP Using On-Chip 128-Bit Advanced Encryption

Standard (AES) Decryption (except ARM-enabled ProASIC

devices) via JTAG (IEEE 1532–compliant)

†

• FlashLock

to Secure FPGA Contents

Clock Conditioning Circuit (CCC) and PLL

†

• Wide Range Power Supply Voltage Support per JESD8-B,

Allowing I/Os to Operate from 2.7 V to 3.6 V

• Bank-Selectable I/O Voltages—up to 4 Banks per Chip

• Single-Ended I/O Standards: LVTTL, LVCMOS 3.3 V /

2.5 V / 1.8 V / 1.5 V, 3.3 V PCI / 3.3 V PCI-X

†

and LVCMOS

2.5 V / 5.0 V Input

• Differential I/O Standards: LVPECL, LVDS, B-LVDS, and

M-LVDS (A3P250 and above)

• I/O Registers on Input, Output, and Enable Paths

• Hot-Swappable and Cold Sparing I/Os

‡

• Programmable Output Slew Rate

†

and Drive Strength

• Weak Pull-Up/-Down

• IEEE 1149.1 (JTAG) Boundary Scan Test

• Pin-Compatible Packages across the ProASIC3 Family

• Six CCC Blocks, One with an Integrated PLL

• Configurable

Phase-Shift,

Multiply/Divide,

Capabilities and External Feedback

• Wide Input Frequency Range (1.5 MHz to 350 MHz)

Delay

Low Power

• Core Voltage for Low Power

• Support for 1.5 V-Only Systems

• Low-Impedance Flash Switches

Embedded Memory

†

High-Performance Routing Hierarchy

• Segmented, Hierarchical Routing and Clock Structure

• 1 kbit of FlashROM User Nonvolatile Memory

• SRAMs and FIFOs with Variable-Aspect-Ratio 4,608-Bit RAM

Blocks (×1, ×2, ×4, ×9, and ×18 organizations)

†

• True Dual-Port SRAM (except ×18)

ARM Processor Support in ProASIC3 FPGAs

• M1 and M7 ProASIC3 Devices—Cortex-M1 and CoreMP7 Soft

Processor Available with or without Debug

Advanced I/O

• 700 Mbps DDR, LVDS-Capable I/Os (A3P250 and above)

• 1.5 V, 1.8 V, 2.5 V, and 3.3 V Mixed-Voltage Operation

Table 1 •

ProASIC3 Product Family

ProASIC3 Devices

A3P015

ARM7 Devices

Cortex-M1 Devices

System Gates

15 k

Typical Equivalent Macrocells

128

VersaTiles (D-flip-flops)

384

RAM kbits (1,024 bits)

–

4,608-Bit Blocks

–

FlashROM Bits

Secure (AES) ISP

–

Integrated PLL in CCCs

–

VersaNet Globals

I/O Banks

Maximum User I/Os

Package Pins

QFN

QN68

VQFP

TQFP

PQFP

FBGA

A3P030

A3P060

A3P125

A3P250

M1A3P250

250 k

2,048

6,144

Yes

157

QN132

VQ100

PQ208

FG144/256

PQ208

FG144/256/

484

PQ208

FG144/256/

484

PQ208

FG144/256/

484

A3P400

M1A3P400

400 k

–

9,216

Yes

194

A3P600

M1A3P600

600 k

–

13,824

108

Yes

235

A3P1000

M7A3P1000

M1A3P1000

–

24,576

144

Yes

300

30 k

256

768

–

QN48, QN68,

QN132

VQ100

60 k

512

1,536

Yes

QN132

VQ100

TQ144

FG144

125 k

1,024

3,072

Yes

133

QN132

VQ100

TQ144

PQ208

FG144

Notes:

1. Refer to the

CoreMP7

datasheet or

Cortex-M1

product brief for more information.

2. AES is not available for ARM-enabled ProASIC3 devices.

3. Six chip (main) and three quadrant global networks are available for A3P060 and above.

4. For higher densities and support of additional features, refer to the

ProASIC3E Flash Family FPGAs

handbook.

5. The M1A3P250 device does not support this package.

† A3P015 and A3P030 devices do not support this feature.

February 2009

‡ Supported only by A3P015 and A3P030 devices.

1 – ProASIC3 Device Family Overview

General Description

ProASIC3, the third-generation family of Actel flash FPGAs, offers performance, density, and

features beyond those of the ProASIC

PLUS®

family. Nonvolatile flash technology gives ProASIC3

devices the advantage of being a secure, low-power, single-chip solution that is live at power-up

(LAPU). ProASIC3 is reprogrammable and offers time-to-market benefits at an ASIC-level unit cost.

These features enable designers to create high-density systems using existing ASIC or FPGA design

flows and tools.

ProASIC3 devices offer 1 kbit of on-chip, reprogrammable, nonvolatile FlashROM storage as well as

clock conditioning circuitry based on an integrated phase-locked loop (PLL). The A3P015 and

A3P030 devices have no PLL or RAM support. ProASIC3 devices have up to 1 million system gates,

supported with up to 144 kbits of true dual-port SRAM and up to 300 user I/Os.

ProASIC3 devices support the ARM7 soft IP core and Cortex-M1 devices. The ARM-enabled devices

have Actel ordering numbers that begin with M7A3P (CoreMP7) and M1A3P (Cortex-M1) and do

not support AES decryption.

Flash Advantages

Reduced Cost of Ownership

Advantages to the designer extend beyond low unit cost, performance, and ease of use. Unlike

SRAM-based FPGAs, flash-based ProASIC3 devices allow all functionality to be live at power-up; no

external boot PROM is required. On-board security mechanisms prevent access to all the

programming information and enable secure remote updates of the FPGA logic. Designers can

perform secure remote in-system reprogramming to support future design iterations and field

upgrades with confidence that valuable intellectual property (IP) cannot be compromised or

copied. Secure ISP can be performed using the industry-standard AES algorithm. The ProASIC3

family device architecture mitigates the need for ASIC migration at higher user volumes. This

makes the ProASIC3 family a cost-effective ASIC replacement solution, especially for applications in

the consumer, networking/ communications, computing, and avionics markets.

Security

The nonvolatile, flash-based ProASIC3 devices do not require a boot PROM, so there is no

vulnerable external bitstream that can be easily copied. ProASIC3 devices incorporate FlashLock,

which provides a unique combination of reprogrammability and design security without external

overhead, advantages that only an FPGA with nonvolatile flash programming can offer.

ProASIC3 devices utilize a 128-bit flash-based lock and a separate AES key to secure programmed

intellectual property and configuration data. In addition, all FlashROM data in ProASIC3 devices

can be encrypted prior to loading, using the industry-leading AES-128 (FIPS192) bit block cipher

encryption standard. The AES standard was adopted by the National Institute of Standards and

Technology (NIST) in 2000 and replaces the 1977 DES standard. ProASIC3 devices have a built-in AES

decryption engine and a flash-based AES key that make them the most comprehensive

programmable logic device security solution available today. ProASIC3 devices with AES-based

security allow for secure, remote field updates over public networks such as the Internet, and

ensure that valuable IP remains out of the hands of system overbuilders, system cloners, and IP

thieves. The contents of a programmed ProASIC3 device cannot be read back, although secure

design verification is possible.

ARM-enabled ProASIC3 devices do not support user-controlled AES security mechanisms. Since the

ARM core must be protected at all times, AES encryption is always on for the core logic, so

bitstreams are always encrypted. There is no user access to encryption for the FlashROM

programming data.

v1.1

1-1

Recommended Resources

Single-stage voltage regulator tube regulated power supply circuit

Make a holiday light controller with SH-868

Fun amusement machine circuit

PLL amplifier and demodulator

Electrostatic spraying high frequency voltage generating circuit

555 pulse electrotherapy instrument circuit

My opinion on management!: Management: dealing with people. How to make people happy and comfortable while giving full play to their strengths and contributing to the goal is really a big question....; eeleader Talking about work

PC sends Chinese characters to the module through the serial port and then sends them to another module wirelessly.: PC sends Chinese characters to the module through the serial port and then sends them to another module wirelessly. Using LCD Chinese display, Chinese characters cannot be transmitted. Please help....; lhm0208 RF/Wirelessly

What is the address of the register in 430?: May I ask what are the addresses of R0, SR/R1, R2, R3, SFR in 430?Also, during the initialization of the program, is the stack area self-defined or fixed (such as MOV #0300H, SR)?Thank you very much! ...; Edwarddong Microcontroller MCU

EEWORLD University ---- Introduction to Sitara? Product Family_2016 TI Embedded Products Seminar Record: Sitara? Product Family Introduction_2016 TI Embedded Products Seminar Record : https://training.eeworld.com.cn/course/3750This course is a record of the 2016 TI embedded product offline seminar, in wh...; soso MCU

TI no longer supports sample applications from non-corporate email addresses. What should I do?: [font=宋体][size=4]I received a subscription email from TI, which said that starting from this fall, if you want to order free samples on [url]www.ti.com or [url]www.ti.com.cn[/url][/url], you must use ...; wojiaomt TI Technology Forum

Seek help from seniors on BMS software design experience and knowledge: I just graduated and am working on software design for automotive power batteries. Since I have never been exposed to this kind of thing before, I am confused now. I sincerely ask the seniors to share...; baozhihao Embedded System

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components