DDLK 03..
Vishay Draloric
Ceramic Singlelayer Feed-Through Capacitors 400V
DC
DESIGN:
70 -2
12 +1
4.4
±
0.15
30 -5
Feed-through capacitor solderable, varnished
RATED VOLTAGE U
R
:
400 V
DC
(280 V
RMS
)
DIEL ECTRIC STRENGTH BETWEEN LEADS:
1250V
DC
1 s
0.8
DISSIPATION FACTOR tan
δ:
M5 x 0.5 Thread
7.0 Hex
2.5
±
0.2
Color code
∅
Ceramic Class 1:see General Information
Ceramic Class 2:≤ 25 • 10
-3
INSULATION RESISTANCE R
IS
:
Ceramic Class 1:≥ 1 • 10
10
Ω
Ceramic Class 2:≥ 5 • 10
9
Ω
• Dimensions in mm
L
1
(mm)
7
12
16
L
2
(mm)
39 +1
65 +1
65 +1
CATEGORY TEMPERATURE RANGE
ϑ
A
:
Ceramic Class 1:(- 55 to + 125) °C
Ceramic Class 2:(- 25 to + 85) °C
DDLK 0307
DDLK 0312
DDLK 0316
CLIMATIC CATEGORY ACC. TO EN 60068-1:
40 / 085 / 04
PERMISSIBLE POWER LOSS:
DDLK 0307:
DDLK 0312:
DDLK 0316:
135 mW
135 mW
150 mW
PERMISSIBLE REACTIVE POWER:
DDLK 0307:
DDLK 0312:
DDLK 0316:
10 A
4 VAr (Class 2), 67 VAr (Class 1)
5.4 VAr (Class 2), 90 VAr (Class 1)
7.1 VAr (Class 2), 120 VAr (Class 1)
MARKING:
none
CLASS
CERAMIC
DIELECTRIC
P 100
NP 0
1B
N 075
N 150
N 470
N 750
1F
2
N 1500
R 700
R 2000
R 4000
* This series is available in both the Class 1A and Class 1B (standard)
** Class 1A only available
≥
15 pF
CERAMIC DIELECTRIC
P 100 to N 750
R 700 to R 2000
R 4000 to R 6000
NOMINAL VALUE
< 10 pF
≥
10 pF
DIRECT CURRENT I
DC
:
CAPACITANCE VALUES (pF)
DDLK 0307
1.5 to 10
5 to 15
5 to 20
6.8 to 20
12 to 30
20 to 62
68 to 100
180 to 360
390 to 910
680 to 1800
to 130
to 150
to 680
to 1600
to 3600
to 200
to 180
to 1500
to 3900
to 6800
to 62
to 100
DDLK 0312
to 12
DDLK 0316
to 36
CAPACITANCE TOLERANCE
± 0.5 pF
± 1 pF
± 10 %
- 20 + 50 %
- 20 + 50 %
- 20 + 80 %
± 20 %
ORDERING INFORMATION
DDLK 0307
Document Number: 22042
Revision: 31-May-05
400 V
DC
680 pF
- 20 + 50 %
R 2000
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Analog electronics
京公网安备 11010802033920号
EEWORLD
