Bulletin No. PRM/RRM-B
Drawing No. LP0522
Released 06/13
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
MODELS PRM & RRM – MINIATURE DC POWERED PHOTO-ELECTRIC SENSOR
RETROREFLECTIVE, PROXIMITY (DIFFUSE) & OPPOSED
BEAM PAIRS
+10 to +30 VDC OPERATION WITH REVERSE POLARITY
PROTECTION
COMPLEMENTARY NPN (CURRENT SINKING) OUTPUTS
DURABLE BLACK POLYCARBONATE/ABS ALLOY HOUSING
MEETS NEMA 6 AND IP65 STANDARDS
LED’s DISPLAY OPERATING STATUS
PUSH BUTTON DIGITAL GAIN ADJUSTMENT
GENERAL DESCRIPTION
These miniature self-contained and powerful Retroreflective, Proximity
(Diffuse) and Opposed Beam Pair Photo-electric Sensors provide application
flexibility in counting, positioning and object detection. All units are inter-
changeable with conventional 12 mm threaded barrel-type photo-electrics and
inductive proximity sensors. Their small size, in addition to various mounting
options, greatly increases alignment ease and application possibilities.
All units can be powered by supplies ranging from +10 to +30 VDC and are
reverse polarity protected. The complementary NPN open collector (Current
Sinking) outputs are protected from continuous overload and inductive load
transients and are rated to 150 mA, with low saturation voltage and less than 10
µA off-state leakage current. In addition, no false outputs are generated at
power-up. Two versions of the sensor are available, a 6 foot (1.83 M) long 4
conductor PVC jacketed cable or 6 inch long quick disconnect Pico-style con-
nector provides supply input and transistor output.
These miniature sensors offer a digital gain adjustment that uses a single
sealed push button to streamline installation and setup. The user simply holds the
button in to achieve maximum sensitivity, and then can click the button for seven
decremental settings to fine tune for your application. They also feature smart
new status indicators. Green and amber LED’s display operating status from
three directions, indicate “power on” and “light sensed” and flash to signal
“maximum gain,” “gain reduced one increment” and “minimum gain” condi-
tions. You can tell operating status of your sensors at a glance.
MODEL PRMDC - PROXIMITY SENSOR
The Model PRMDC is a miniature, DC powered, Proximity (Diffuse) photo-
electric sensor with a 8" maximum detecting distance. This sensor requires no
special reflectors or reflective tapes and the limited 8" sensing range reduces
detection of background reflections. It is ideally suited for detection of transpar-
ent or translucent objects, parts ejected from presses, and rotating targets such as
pulley spokes. A modulated “infrared” LED light beam provides immunity to
ambient light.
In operation, the modulated light beam is reflected by the object to be detect-
ed. Actual sensing range is determined by the surface area and the amount of
reflectivity of the object. This reflected light is sensed by a photo-transistor,
amplified, demodulated and then energizes the outputs.
PRMDC
PROXIMITY
SENSING RANGE UP TO 8" (20.3 mm)
OBJECT
MODEL RRMDC - RETROREFLECTIVE SENSOR
The Model RRMDC is a miniature, DC powered, retroreflective photo-elec-
tric sensor with maximum detection range of 6.5 feet [1.98 M] (with 3" dia.
reflector Model RT2). The “visible” LED light beam allows for easy alignment
and is modulated, providing immunity to ambient light. The small beam size
makes it a good choice for detecting relatively small objects.
In operation, the visible LED light beam is directed at a photo transistor,
amplified and demodulated. An object which then breaks this beam will trigger
the output.
RRMDC
RETRO-
REFLECTIVE
MODELS EMMDC & RCMDC - OPPOSED BEAM
EMITTER/ RECEIVER SENSOR PAIR
The Models EMMDC (Emitter) and the RCMDC (Receiver) are miniature,
DC powered, Opposed Beam photo-electric sensor pairs with a 13 foot sensing
range. The Emitter contains a high power modulated “infrared” LED. The
Receiver contains a sensitive photo-transistor, amplifier-demodulator and output
transistor. In operation, this output will be triggered when the Receiver detects
that an object begins to break the Emitter beam. Due to their high gain, they are
ideally suited for detecting opaque objects in dirty and dusty areas or when
condensation or oil film environments are present.
SENSING RANGE UP TO 13' (3.96 M)
EMMDC
EMITTER
OBJECT
RCMDC
RECEIVER
RETRO TARGET
SENSING RANGE UP TO 6.5' (1.98 M)
OBJECT
1
SPECIFICATIONS
1.
POWER REQUIREMENTS:
+10 to +30 VDC (10% Ripple Max.)
Current Draw: 25 mA max. (exclusive of load)
Reverse Polarity Protected
2.
REPEATABILITY:
Opposed Mode: 1 msec, All others: 175 µsec.
3.
OUTPUTS:
Current Sinking Complementary NPN Open Collector
Transistor; Short Circuit Protected
I
SNK
: 150 mA max. each; V
OH
= 30 VDC max.
V
SAT
: 1 V @ 10 mA load
Offstate Leakage Current : Less than 10 µA @ 30 VDC
4.
OUTPUT RESPONSE TIME:
Opposed Mode: 8 msec ON, 4 msec
OFF, All others 1.5 msec
5.
OPERATING TEMPERATURE:
-4° to+131°F (-20° to +55°C)
6.
WEIGHT:
0.4 oz. (1.13 g)
DIMENSIONS In inches (mm)
FRONT VIEW
.31 (8.0)
.79
(20.0)
REAR VIEW
.31 (8.0)
.79
(20.0)
PUSHBUTTON
LEDS
SIDE VIEW
1.38 (35.0)
.87 (22.0)
.12 (3.0)
.07 (1.8)
.17 (4.2)
PVC-COVERED CABLE
(SEE WIRE OPTIONS)
.71
(18.0)
MOUNTING NUT
(SUPPLIED)
.55 (14.0)
MOUNTING HOLES (2),
Ø.13
(Ø3.2), FOR
SIDE MOUNTING
M12 X 1
THREAD
SET-UP AND INSTALLATION
USING THE PHOTOELECTRIC
LED INDICATORS
The photoelectric has two bright LEDs; both are visible from the back, and
each is visible from one side of the sensor. They indicate the following:
Green steady:
Power ON
Amber steady:
Light sensed
Green flashing rapidly 5 times:
Maximum gain
Single green flash:
Push button “click” registered, gain reduced by one
increment
Amber/Green alternating:
Minimum gain (can not reduce further)
SETTING SENSITIVITY
Push Button
Amber Output LED
Green Power LED
The unit features an extremely simple method for setting sensitivity (gain).
Simply hold the push button until the LED flashes rapidly, 5 times. The sen-
sor is automatically set to maximum gain.
Reduce gain by pressing the push button briefly (“clicking” it) up to 7 times;
gain will reduce in single increments with each click. Amber and green LEDs
alternate after the lowest setting is reached.
If the gain is accidentally set too low, hold the push button until gain
increases to the maximum level, then click the push button down to the appro-
rpriate level. Gain may be readjusted in this way at any time.
ORDERING INFORMATION
MODEL NO.
DESCRIPTION
PART NUMBERS
w/ 2 Meter Cable
w/ Pico Connector
RRMDC
PRMDC
EMMDC
RCMDC
MB2
MB3
RT1
RT2
CCMPE
Retroreflective DC Photo-Electric Sensor
Proximity (Diffuse) DC Photo-Electric Sensor
DC Emitter (Opposed Beam Pair)
DC Receiver (Opposed Beam Pair)
Bottom Mount Bracket Kit
Side Mount Bracket Kit
1-1/2" Dia. Prismatic Reflector (Model RRMDC)
3" Dia. Prismatic Reflector (Model RRMDC)
Pico-Style Quick Disconnect Connector & Cable, 2 meters
RRMDC000
PRMDC000
EMMDC000
RCMDC000
RRMDC001
PRMDC001
EMMDC001
RCMDC001
MBM20000
MBM30000
RT100000
RT200000
CCMPE000
Do not dispose of unit in trash - Recycle
2
CCMPE
BRN
BLU
WIRE OPTIONS
4-WIRE TINNED ENDS
BLU
WHT
BLK
BRN
BLK
WHT
4-PIN FEMALE PICO-STYLE CONNECTOR [ 6.5' (2 m) ]
4-PIN MALE PICO-STYLE CONNECTOR
MOUNTING
Various mounting methods have been designed to simplify alignment and
provide versatility in any industrial environment. The integral 12 mm thread-
ed lense can be interchanged with existing threaded entries common to 12 mm
barrel sensors and inductive proximity switches. The threaded lense can also
be installed into panel thicknesses of 3/16" through a 0.51" diameter hole and
tightened into place with the supplied mounting nut. Two #4 screw clearance
through-holes on 0.55" centers are available for side mounting or side nesting
of multiple units on 1/2" centers for scanning large areas or for code reading
applications. Units may also be mounted using the stainless steel Bottom-
Mount or Side-Mount Bracket Kits (Models MBM2 or MBM3). These brack-
ets allow 2 axes of movement & greatly simplify alignment.
WIRING DIAGRAM
BRN (+10 TO 30VDC)
BLK (NPN O.C.)
BLU (COMMON)
WHT (NPN O.C.)
MBM3
Ø.14
(Ø3.5)
30°
R.55 (R14.0)
FRONT OF SENSOR
TILTS VERTICALLY
±15 DEGREES
FROM HORIZONTAL
MBM2
Ø.14
(Ø3.5)
R.55 (R14.0)
30°
BRACKET ROTATES HORIZONTALLY
±15 DEGREES FROM POSITION SHOWN
.91 (23.0)
R.07 (R1.75)
.63 (16.0)
.06 (1.5)
30°
Ø.55
(Ø14.0)
.43 (11.0)
.87 (22.0)
.28 (7.0)
.91 (23.0)
Ø.51
(Ø13.0)
FULL R.
1.06
(27.0)
.63 (16.0)
.06 (1.5)
1.06
(27.0)
1.06
(27.0)
.43 (11.0)
.87 (22.0)
3
LIMITED WARRANTY
The Company warrants the products it manufactures against defects in materials and workmanship
for a period limited to two years from the date of shipment, provided the products have been stored,
handled, installed, and used under proper conditions. The Company’s liability under this limited
warranty shall extend only to the repair or replacement of a defective product, at The Company’s
option. The Company disclaims all liability for any affirmation, promise or representation with
respect to the products.
The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against
damages, claims, and expenses arising out of subsequent sales of RLC products or products contain-
ing components manufactured by RLC and based upon personal injuries, deaths, property damage,
lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be to any
extent liable, including without limitation penalties imposed by the Consumer Product Safety Act
(P.L. 92-573) and liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act
(P.L. 93-637), as now in effect or as amended hereafter.
No warranties expressed or implied are created with respect to The Company’s products except
those expressly contained herein. The Customer acknowledges the disclaimers and limitations con-
tained herein and relies on no other warranties or affirmations.
Red Lion Controls
Headquarters
20 Willow Springs Circle
York PA 17406
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
Red Lion Controls
Europe
Softwareweg 9
NL - 3821 BN Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
Red Lion Controls
India
201-B, 2nd Floor, Park Centra
Opp 32 Mile Stone, Sector-30
Gurgaon-122002 Haryana, India
Tel +91 984 487 0503
Red Lion Controls
China
Unit 302, XinAn Plaza
Building 13, No.99 Tianzhou Road
ShangHai, P.R. China 200223
Tel +86 21 6113 3688
Fax +86 21 6113 3683
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
