Technical Data Sheet
BAR SN63
July
-2013
PRODUCT DESCRIPTION
BAR SN63 provides the following product characteristics:
Technology
Solder bar
Application
Sn/Pb soldering
BAR SN63 alloy is a tin/lead alloy used in traditional electronic
assembly soldering applications.
FEATURES AND BENEFITS
● Eutectic SnPb alloy
● Improved yields, especially on densely populated boards
● Special alloy composition improves flow and reduces oxide
formation for more consistent results
● Bright solder joints
● Low impurity levels increase life of alloy in the solder bath and
reduce bath maintenance
● Passes IPC/EIA J-STD-006B requirements
TYPICAL PROPERTIES
ELEMENT
Tin (Sn)
Lead (Pb)
Aluminum (Al)
Antimony (Sb)
Arsenic (As)
Bismuth (Bi)
Cadnium (Cd)
Copper (Cu)
Gold (Au)
Iron (Fe)
Indium (In)
Nickel (Ni)
Silver (Ag)
Zinc (Zn)
Solder Bar Typical Properties
Alloy melting range, ºC
Density, g/cm³
Tensile Strength, N/mm²
Weight %
62.5 to 63.5
Remainder
≤0.005
≤0.5
≤0.03
≤0.1
≤0.002
≤0.08
≤0.05
≤0.02
≤0.03
≤0.01
≤0.05
≤0.003
Not for Product Specifications
The technical information contained herein is intended for reference
only. Please contact Henkel Technologies Technical Service for
assistance and recommendations on specifications for this product.
Conversions
(°C x 1.8) + 32 = °F
kV/mm x 25.4 = V/mil
mm / 25.4 = inches
µm / 25.4 = mil
N x 0.225 = lb
N/mm x 5.71 = lb/in
N/mm² x 145 = psi
MPa x 145 = psi
N·m x 8.851 = lb·in
N·m x 0.738 = lb·ft
N·mm x 0.142 = oz·in
mPa·s = cP
Disclaimer
Note:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. The product
can have a variety of different applications as well as differing application and
working conditions in your environment that are beyond our control. Henkel is,
therefore, not liable for the suitability of our product for the production processes
and conditions in respect of which you use them, as well as the intended
applications and results. We strongly recommend that you carry out your own
prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any other
written or oral recommendation(s) regarding the concerned product is excluded,
except if otherwise explicitly agreed and except in relation to death or personal
injury caused by our negligence and any liability under any applicable mandatory
product liability law.
In case products are delivered by Henkel Belgium NV, Henkel Electronic
Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and
Henkel France SA please additionally note the following:
In case Henkel would be nevertheless held liable, on whatever legal ground,
Henkel’s liability will in no event exceed the amount of the concerned delivery.
In case products are delivered by Henkel Colombiana, S.A.S. the following
disclaimer is applicable:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. Henkel is,
therefore, not liable for the suitability of our product for the production processes
and conditions in respect of which you use them, as well as the intended
applications and results. We strongly recommend that you carry out your own
prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any other
written or oral recommendation(s) regarding the concerned product is excluded,
except if otherwise explicitly agreed and except in relation to death or personal
injury caused by our negligence and any liability under any applicable mandatory
product liability law.
183
7.4
67
PACKAGING
BAR SN63 is sold in economical 1000 and 2000 lbs pallets.
GENERAL INFORMATION
For safe handling information on this product, consult the
Material Safety Data Sheet (MSDS).
Henkel Americas
+1 949 789 2500
Henkel Europe
+44.1442.278.000
Henkel Asia
+86.21.2891.8000
TDS BAR SN63, July-2013
In case products are delivered by Henkel Corporation, Resin Technology
Group, Inc., or Henkel Canada Corporation, the following disclaimer is
applicable:
The data contained herein are furnished for information only and are believed to
be reliable. We cannot assume responsibility for the results obtained by others
over whose methods we have no control. It is the user's responsibility to
determine suitability for the user's purpose of any production methods mentioned
herein and to adopt such precautions as may be advisable for the protection of
property and of persons against any hazards that may be involved in the handling
and use thereof. In light of the foregoing,
Henkel Corporation specifically
disclaims all warranties expressed or implied, including warranties of
merchantability or fitness for a particular purpose, arising from sale or use
of Henkel Corporation’s products. Henkel Corporation specifically
disclaims any liability for consequential or incidental damages of any kind,
including lost profits.
The discussion herein of various processes or
compositions is not to be interpreted as representation that they are free from
domination of patents owned by others or as a license under any Henkel
Corporation patents that may cover such processes or compositions. We
recommend that each prospective user test his proposed application before
repetitive use, using this data as a guide. This product may be covered by one or
more United States or foreign patents or patent applications.
Trademark usage
Except as otherwise noted, all trademarks in this document are trademarks of
Henkel Corporation in the U.S. and elsewhere.
®
denotes a trademark
registered in the U.S. Patent and Trademark Office.
Reference 0.0
Americas
Europe
Asia
+1.888.943.6535
+44.1442.278.000
+86.21.3898.4800
For the most direct access to local sales and technical support visit: www.henkel.com/electronics
Analog electronics
京公网安备 11010802033920号
EEWORLD
