^For symbol “U” termination add .20 inches (0.51mm) to the positive length tolerance and .015 inches (0.38mm) to the positive width and thickness tolerances.
Ordering Information
DSCC Drawing
Number
03029 (0402 case size)
03029
BX
Dielectric
BR
BX
Capacitance
Code (pF)
2 Sig. Digits +
Number of
Zeros
222
Z
Voltage
W = 6.3V
X = 10V
Y = 16V
Z = 25V
A = 50V
B = 100V
C = 200V
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
J
End
Metallization^
U = SnPb (4%min)
Z = SnPb (4%min)
Z
Blank = No group C testing
C = Full group C
L = 2,000 hour life test only
M = 1,000 hour life test only
H = Low voltage humidity only
Group C
Testing Option
C
Blank = Bulk Bag
Packaging/Grade
(C-Spec)*
7189
7246 = Anti-Static Bulk Bag
7292 = Waffle Pack
7189 = 7” Reel Marked
^ “U” = Base metallization-barrier metal-solder coated (tin/lead alloy, with a min of 4% lead). Melting point is +200ºC or less. Metallization thickness is ≥ 60µ-inches.
^ “Z” = Base metallization-barrier metal-tinned (tin/lead alloy, with a min of 4% lead).
* Additional reeling or packaging options may be available. Contact KEMET for details.
Additional termination options may be available. Contact KEMET for details.
A “Packaging C-Spec” is a 4-digit numeric code which identifies the packaging type. When ordering, the proper code must be included in the 15th through 18th
character positions of the ordering code. See “Ordering Information” section of this document for further details. Product ordered without a “Packaging C-Spec” will
default to our standard “Bulk Bag” packaging.
2
A “Packaging C-spec” (see note
1
above) is not required for “Bulk Bag” packaging (excluding Anti-Static Bulk Bag). The 15th through 18th character positions of
the ordering code should be left blank. All product ordered without a “Packaging C-Spec” will default to our standard “Bulk Bag” packaging.
Soldering Process
Marking
All parts incorporate the standard KEMET barrier layer of pure nickel with a tin-lead (SnPb) finish. Both “U” and “Z” termination finishes
contain a minimum of 4% lead.
Marking is not available for EIA 0402 case size capacitors. These chips will be supplied unmarked.
It was working fine before, but now I can't download. Don't blame me for the wrong BOOT0 and BOOT1 settings? Can I be sure that they are correct ? Is it a problem of luck? Or is there a problem with t...
A novice among novices! Hope everyone can help me generously or provide helpful information, tutorials, etc. :) I want to customize a tailored Linux system. Now I have a set of red hat installation di...
I am now using VC++.2008 to write a remote control software for a tek 2024b oscilloscope. I want to use the TekVISA interface, but I have no experience in software development. Where should I start? A...
Without further ado, let's get straight to the point.Taobao link: cyanfeel.taobao.com [[i] This post was last edited by sblpp on 2012-12-8 15:41[/i]]...
With the promotion of the construction of intelligent communities in the country, anti-theft systems have become essential equipment for intelligent communities. Especially in recent years, the urg...[Details]
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
In this article, the high-performance DSP developed by TI can be used as an effective confidentiality method if it is applied to PC encryption cards.
As an effective network security solution,...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
1 Introduction
As an emerging microfabrication technology, micro-electromechanical system (MEMS) technology has begun to be applied in various fields. It can integrate functions such as inform...[Details]
Contact resistance
is the resistance to current flow through a closed pair of contacts. This type of measurement is performed on devices such as connectors,
relays
, and switches. The...[Details]
1 Introduction to HART Protocol
HART (Highway Addressable Remote Transducer), an open communication protocol for addressable remote sensor high-speed channels, was launched by Rosemen in the U...[Details]
Flooded Batteries
This battery developed in Germany can be used to power flashlights, strobe lights and toys as long as it is filled with water. This battery can be stored for 50 years and can...[Details]
Nippon Electric Works and Volvo Technology Japan have developed a wireless power supply system for electric vehicles (EVs). Using this system, the two companies have successfully conducted an exper...[Details]
Introduction
Liquid crystal, as a display device, is widely used in low-power products such as instruments, meters, and electronic equipment with its unique advantages. In the past, the displ...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
