REVISION CS
DO NOT
SCALE FROM
THIS PRINT
NOTES:
FW-XX-XX-XX-D-XXX-XXX-XX
PATENT NUMBERS
1.
C
REPRESENTS A CRITICAL DIMENSION.
5713755 / 5961339
2. MINIMUM PUSHOUT FORCE SHALL BE 1 LB.
3. GOLD AREA TO APPEAR ON POST.
POSITION SPEC
4. TAILS TO BE SHEARED TO DIMENSION SHOWN.
No. OF POS PER ROW
(FOR HAND TOOLING ONLY)
-02 THRU -50
5. TO BE VALID ALL PART NUMBERS MUST MEET THE
FOLLOWING PARAMETERS: THE BOARD SPACE
LEAD STYLE
RANGE, POST HEIGHT MIN. AND BOARD + POST
COMBINATION FOR EACH STYLE.
-03: USE T-1S15-XX-X
-05: USE T-1S15-XX-X
6. MAXIMUM BURR: .003[0.08] ON CUT TAIL.
(SEE TABLE 1)
7. MAXIMUM CUT FLASH TO BE .010[0.25] ON CRITICAL
AREAS AS SHOWN.
PLATING
8. AVAILABLE ONLY W/BOARD SPACE .215[5.46]
-G: 10µ" GOLD IN CONTACT AREA,
TOP .610[15.49].
3µ" GOLD ON TAIL
9. PARTS TO BE ASSEMBLED WITH ALIGNMENT HOLES
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
(IN BODY) FACING THE TAILS
MATTE TIN ON TAIL
10. LOWER BODY MAY BE BLACK OR WHITE.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
11. FILL BODY SO THAT THE LEAD IN OF THE CORE IS
MATTE TIN TAIL
ON THE TAIL SIDE.
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
12. MAXIMUM HEIGHT VARIATION BETWEEN ROWS: .005[0.13].
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
13. FOR ADDED MECHANICAL STABILITY, SAMTEC
MATTE TIN TAIL
RECOMMENDS MECHANICAL BOARD SPACERS
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
BE USED IN APPLICATIONS WITH GOLD OR SELECTIVE
MATTE TIN ON TAIL
GOLD PLATED CONNECTORS. CONTACT
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
IPG@SAMTEC.COM FOR MORE INFORMATION.
MATTE TIN ON TAIL
14. SUB-FW-50-03-XX-D-280-015 TO USE T-1S15-08,
SUB-FW-50-05-XX-D-400-065 TO USE T-1S15-03.
02
C
L
(NO OF POSITIONS X .050[1.27]) ±.010[0.25]
50
DOUBLE ROW
(SEE TABLE 1 FOR BODY STYLE)
OPTION
-P: PICK & PLACE PAD (USE PPP-25)
(USE PPP-25-NT WITH -TR ONLY)
(SEE FIG. 3, SHT 2)(5 POS. MIN)
-TR: TAPE & REEL
.740[18.80] MAX OVERALL HEIGHT AVAILABLE FOR
-TR. MAX OVERALL HEIGHT = POST + BOARDSPACE
+ PAD + ALIGNMENT PIN = .740[18.80]
-ES: END SHROUDS (SEE FIG. 5, SHT 2)
(9 POS PER ROW MIN)
(MAX POST: .075[1.91])
(SEE NOTE 8)
-EP: GUIDE POST (FIG. 6, SHT 3)
(9 POS PER ROW MIN)
(MAX POST: .075[1.91])
(USE ONLY WHEN MATING WITH CLP)
(SEE NOTE 8)
-A: ALIGNMENT PIN (MOLDED OR STAKED, SAMTEC'S
DISCRETION ON WHICH)
(SEE FIG. 7 & 8 SHT 3)
(STAKED: 6 POS. MIN)(MOLDED: 3 POS. MIN)
(SEE NOTE 8)
POST HEIGHT
(SEE NOTE 5)
.065[1.65] MIN
POST + BOARD SPACE = "F" =
-03: .150-.400 [3.81-10.16]
*.401-.675 [10.19-17.15]
-05: *150-.400 [3.81-10.16]
.401-.675 [10.19-17.15]
BOARD SPACE OPTION
(SEE NOTE 5)
SEE TABLE 1
-03 LEAD STYLE (.085[2.16 MIN - .335[8.51] MAX)
-05 LEAD STYLE (.248[6.30] MIN - .610[15.49] MAX)
MAX = "A" - POST (SEE TABLE 1)
C
.135 3.43 REF
L
* = FOR EXISTING CUSTOMERS ONLY
01
.016 0.41
SQ REF (TYP)
49
.050 1.27 REF
.070 1.78 REF
2 MAX SWAY
(CONTACT AREA)
(EITHER DIRECTION)
.034 0.86 REF
FTS-XX-DV
T-1S15-XX-X
C
C
"A" ±.005[0.13]
(BOARD SPACE)
90°±4°
C
"F"
.050 1.27 REF
SEE NOTE 7
POST HEIGHT
(SEE NOTE 12)
02-30POS. = .004[.010]
31-50 POS. = .006[0.15]
C
.229±.010 5.82±0.25
(SEE NOTE 4)
SEE NOTE 7
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.050
- .000
1.27
+.005
+0.13
0.00
FIG 1
.XX: .01[0.3]
5
.XXX: .005[0.13]
.XXXX: .0020[0.051]
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
BODY: LCP, UL 94 VO, COLOR: FTS-50-DV & FTSH-50-D: BLACK
.050 x .050 SURFACE MOUNT BOARD SPACERS
FW-50-D: NATURAL
DWG. NO.
TERMINAL: PHOS BRONZE
MAX FLASH ALLOWED: .002[0.05]
MAX GATE VESTIGE: .002[0.05]
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
FW-XX-XX-XX-D-XXX-XXX-XX
F:\DWG\MISC\MKTG\FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW
BY:
BRATCHER 11-03-1994
SHEET
1
OF
3
REVISION CS
IN-PROCESS 1
FTSH-XX-D
IN-PROCESS 2
.248[6.30] - .610[15.49]
.065 1.65 MIN
(SEE NOTE 12)
.099 2.51
REF (TYP)
"F"
+.005
+0.13
0.00
IN-PROCESS 3
.248[6.30] - .610[15.49]
.065 1.65 MIN
(SEE NOTE 12)
.099 2.51
REF (TYP)
"F"
.065 1.65 MIN
(SEE NOTE 12)
.099 2.51
REF (TYP)
BOARD SPACE - .050[1.27]
.149
- .000
3.78
.125±.010 3.18±0.25
(SEE NOTE 4)
FTSH-XX-D
T-1S15-03-X
NOTE: SHEAR TAILS TO DIM SHOWN.
DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1
.215[5.46] - .335[8.51]
.065 1.65 MIN
(SEE NOTE 12)
.099 2.51
REF (TYP)
"F"
T-1S15-03-X
FW-XX-D
.115
- .000
2.92
+.005
+0.13
0.00
.115
- .001
2.92
- 0.03
+.005
+0.13
C
.229±.010 5.82±0.25
.229±.010 5.82±0.25
FIG 4
No OF POSITIONS x .050[1.27] + .101[2.57] 34.32 ±.008[.20]
.188 4.78 REF
FTSH-XX-D
.265 6.73 REF (TYP)
.168 4.27
REF
"C"
ES-FTSH
(BKT MACHINE)
DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1
((NO OF POS X .025[.635] - .100[2.54])±.010[.25]
.200 5.08 REF
"E" REF
FIG 2
SCALE 2:1
-ES OPTION
DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1
9 POSITION MINIMUM (SEE NOTE 8)
FIG 5
.115
+.005
2.92
+0.13
- .000
0.00
.160 4.06 REF
.317 8.05 REF
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
(PICK AND PLACE PAD)
(5 POSITION MINIMUM)
F:\DWG\MISC\MKTG\FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW
FIG 3
SHOWN WITH LEAD STYLE -03
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 x .050 SURFACE MOUNT BOARD SPACERS
FW-XX-XX-XX-D-XXX-XXX-XX
SHEET
2
OF
3
BY:
BRATCHER 11-03-1994
REVISION CS
FTSH-50-D
(HAND TOOL & M30 MACHINE FW-50-D)
FW-50-D-XX
(BKT MACHINE)
T-1S15-03-X
FTSH-50-D
FTS-XX-DV
.050 1.27
.125±.010 3.18±0.25
.115
- .000
2.92
.050 1.27 REF
FULL RADIUS
.034 0.86
.035 0.89
+.005
+0.13
0.00
IN-PROCESS 2
C
.050
- .000
1.27
+.005
+0.13
0.00
IN-PROCESS 1
(SEE NOTE 4)
IN-PROCESS 3
(No OF POS-2) x .050[1.27]
IN-PROCESS FOR FIG 1
(FOR HAND FILL ONLY)
-A OPTION (MOLDED)
MOLD 3 POSITION MIN
DIFFERENT AS SHOWN OTHERWISE SAME AS FIG 1
FIG 7
(No OF POS x .050[1.27] + .156[3.96])±.008[0.20]
.188 4.78 REF
FTSH-50-D
(HAND TOOL & M30 MACHINE FW-50-D)
FW-50-D-XX
(BKT MACHINE)
T-1S15-03-X
FTSH-50-D
.330 8.38 REF (TYP)
FTSH-EP
"D"
.120 3.05
REF (TYP)
.115
+.005
2.92
+0.13
- .000
0.00
(No OF POS x .050[1.27] + .231[5.87]])±.008[0.20]
.075 1.91
REF (TYP)
.115
+.005
2.92
+0.13
- .000
0.00
SM-A9H
(No OF FINISHED POS
PER ROW - 2) x.050[1.27]
.035 0.89 REF
.034 0.86 REF
C
-A OPTION (STAKED)
6 POSITION MIN
DIFFERENT AS SHOWN OTHERWISE SAME AS FIG 1
FIG 8
-EP OPTION
USE ONLY WHEN MATING TO CLP
(9 POSITION MIN)
(SEE NOTE 8)
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
*
PROPRIETARY NOTE
*
FIG 6
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 4:1
.050 x .050 SURFACE MOUNT BOARD SPACERS
FW-XX-XX-XX-D-XXX-XXX-XX
SHEET
3
OF
3
F:\DWG\MISC\MKTG\FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW
BY:
BRATCHER 11-03-1994
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
