General Electrical, Physical, and Environmental Characteristics
Test Procedures:
Section J of the catalog covers the
applicable test procedures
Humidity Test:
The Non-Hermetically sealed units shall be
tested as outlined in section J “Humidity Test”
As a result of the test there shall be:
• No visible damage
• Max.
∆
C of ± 5%
• Min. IR = 50% of initial limit
• Max. DF = .5%
Electrical Characteristics:
Capacitance, Dissipation Factor, Insulation
Resistance, and Dielectric Strength shall be
measured as specified in section J.
Physical Characteristics:
The Lead Strength shall be measured as
specified in section J.
DC Life:
810P, 820P, 842P & 860P: 140% of rated voltage at 125°C for 250 hours.
832P & 880P: 125% of rated voltage at 150C for 250 hours.
882P: 125% of rated voltage for 250 hours at 125C.
As a result of the test there shall be:
• No permanent open or short circuit
Environmental Characteristics:
Vibration Test: (Condition B)
No mechanical damage, short, open or
intermittent circuit
• No visible damage
• Max.
∆
C of ± 5%
• Min. IR = 50% of initial limit
Moisture Resistance:
The hermetically sealed units shall be tested
as outlined in the Moisture Resistance testing
of section J.
As a result of the test there shall be:
• No visible damage
• Max.
∆
C of ± 5%
• Min. IR = 50% of initial limit
• Max. DF = .5%
• Max. DF = 0.3%
AC Life:
The 859P shall be tested at 110% of the
rated rms voltage at 400 Hz for 250 hours at 85°C.
As a result of the test there shall be:
• No permanent open or short circuit
• No visible damage
• Max.
∆
C of ± 5%
• Min. IR = 50% of initial limit
• Max. DF = 0.5%
F-2
electronics
,
inc.
METALIZED POLYPHENYLENE SULFIDE FILM CAPACITORS
F3
electronics
,
inc.
POLYPHENYLENE SULFIDE FILM CAPACITORS
STYLES FOR METAL-CASE FILM CAPACITORS
SECTION GROUNDED TO CASE
SECTION INSULATED FROM CASE
DIMENSIONS IN INCHES
DIMENSIONS IN INCHES
CASE STYLE 01
+1.00
-0
1.625
CASE STYLE 02
±0.031
0.172 MAX
L
±0.031
+1.00
-0
1.625
0.172
MAX
1.625
+1.00
-0.00
L
D
-0.005
±0.015
DIA
D
+0.015
-0.005
CASE STYLE 04
+1.00
-0
1.625
±0.015
0.020
1.625
+1.000
-0.000
CASE STYLE 03
+1.00
-0
1.625
±0.015
0.020
L
±0.062
L
±0.31
0.020
±0.015
0.172
MAX
0.172
MAX
INSULATING SLEEVE
0.0075 MAX THICKNESS
D
+0.015
-0.005
D
+0.015
-0.037 DIA.
INSULATING SLEEVE
0.0075 MAX THICKNESS
CASE STYLE 12
1.625
+1.00
-0
CASE STYLE 13
1.625
+1.00
-0
1.625
+1.000
-0.000
WRAP-AROUND
APPROX. 135°
FOR 0.400 DIA.,
AND APPROX.
225° FOR LARGER DIA.
DIA
0.172
MAX
L
D
±0.031
L
±0.031
+0.015 DIA
-0.005
C
L
0.172
MAX
C
L
D
-0.005
±0.015
A
±0.005
DIA
C B
W
±0.015
0.033
±0.005
FOR 0.400 DIA.,
0.051
±0.005
FOR DIA. 0.500
AND LARGER
±0.005
A
DIA
C B
W
±0.015
0.033
±0.005
FOR 0.400
DIA., 0.051
±0.005
FOR
DIA. 0.500 AND LARGER
Bracket Dimensions (Style 12 & 13)
Inches
D
0.400
0.500
0.562
0.670
0.750
1.000
W
0.250
0.500
0.500
0.500
0.500
0.500
A
0.144
0.156
0.156
0.156
0.156
0.156
B
0.187±0.015
0.250±0.031
0.250±0.031
0.250±0.031
0.250±0.031
0.250±0.031
C
0.312±0.031
0.437±0.062
0.437±0.062
0.437±0.062
0.437±0.062
0.437±0.062
dimensionsbrac style 12 and 13
F4
electronics
,
inc.
POLYPHENYLENE SULFIDE FILM CAPACITORS
TYPICAL TAB TERMINAL DIMENSIONS
0.020
c
L
±0.005
0.125
±0.015
c
L
SLOT 0.062 x 0.125
A
B
0.296
±0.062
Dwg. No A-9525
A = 0.156 ± 0.015" (3.96 ± 0.38mm)
B = 0.187 ± 0.015" (4.75 ± 0.38mm)
Tab Terminal available only on case diameters equal to or greater than 0.400 inches.
T1 & T3 s t y l e s a r e s u p p l i e d w i t h o n e t a b t e r m i n a l o n t h e i n s u l a t e d e n d a n d a g r o u n d lead on the opposite end.
CATALOG NUMBERING SYSTEM
EXAMPLE:
859P
183
X9
165
S
02
STYLE NUMBER.
SEE PAGE 4 FOR STYLE VARIATIONS
AND CORRESPONDING DIMENSIONS. (Metal case only)
TERMINAL.
S = WIRE LEADS, T = SOLDERING TAB*
*SOLDERING TABS ARE A VAILABLE ONLY ON CASE
DIAMETERS EQUAL TO OR GREATER THAN 0.400
INCHES. (Metal case only)
AC or DC VOLTAGE RATING.
EXPRESSED IN VOLTS. SEE STANDARD
RATINGS CHARTS FOR VOLTAGE CODE.
CAPACITANCE TOLERANCE.
X0 = ±20%; X9 = ±10%
X5 = ± 5%; X2 = ±2%
X1 = ± 1%
CAPACITANCE.
EXPRESSED IN PICOFARADS. THE FIRST TWO DIGITS ARE SIGNIFICANT
FIGURES; THE THIRD IS THE NUMBER OF ZEROS FOLLOWING. SEE STANDARD RATINGS
TABLES FOR CAP ACITANCE CODE. e.g. 183 = 18000pf or 0.018µf
Here are almost all the process parameters of an FPC factory. If you need any help, please reply. There are two purposes for everyone to reply. First, let me know where the post is going; second, with...
It is said that WinCE6.0 has the source code of CETK. I urgently need the source code analysis of the 4012 Network Drivers part, more specifically the One-Card Network Card Miniport Driver Test item. ...
I just received the board over the weekend. Thanks to EEWORLD and ST.I won't say much about the board. It's as impressive as ever. I just started using CUBEMX. The first step after getting the board i...
A constant current source is a power source that can provide a constant current to a load. Therefore, the application range of a constant current source is very wide and it is indispensable in many ca...
I configured the advanced timer TIM1 to generate PWM waves. When I used IAR online debugging, it ran at full speed. After clicking reset, TIM1 still outputted. I had to click reset again to stop TIM1 ...
[align=left][color=#000000]This video introduces the precautions and pros and cons of [font=Calibri]NVDC[/font] chargers, reviews battery charger configuration, and explains [font=Calibri]NVDC[/font] ...
Dual-mode inverters can operate both in conjunction with the grid and independently. These inverters can inject excess energy from renewable energy and storage devices into the grid, and withdraw p...[Details]
"Have you set your calendar reminder?"
On August 24, Nvidia Robotics' official account posted a photo of a black gift box on a social media platform, with an attached greeting card sig...[Details]
The mass production process of the new generation of cockpit platform has started, and the smart cockpit market has entered a new bonus cycle of technology iteration and platform upgrade.
...[Details]
As the main model among new energy vehicles, pure electric vehicles have received strong support and encouragement from the country in recent years, and their development is changing with each pass...[Details]
summary
There are multiple approaches to making industrial systems more intelligent, including applying artificial intelligence (AI) technology at the edge and in the cloud to sensor...[Details]
Compared to cloud databases, minicomputers are purpose-built for decentralized, rugged computing at the edge of the network. By moving applications, analytics, and processing services closer to the...[Details]
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Office (USPTO) for a patent for a door anti-collision system that may be used in future Ford vehicl...[Details]
The difference between a series inverter and a parallel inverter is that they use different oscillation circuits. A series inverter connects L, R, and C in series, while a parallel inverter connect...[Details]
Preface
Low-voltage motors are widely used in nonferrous metallurgical plants. Their abnormal operation not only impacts normal production but can also threaten human life. Therefore, providin...[Details]
For new energy vehicles, the importance of batteries is unquestionable. Not only does it determine the performance of the vehicle, but the battery density also has a great relationship with the veh...[Details]
Nascent Micro is launching devices covering a wide range of power applications, including gallium nitride (GaN) drivers, dual-channel automotive drivers, and battery protection MOSFETs.
...[Details]
0 Introduction
DVI (Digital Visual Interface) is a hot topic in current digital display research and application. Video processing technologies for DVI output not only address issues such as h...[Details]
Nidec Precision Testing Technology Co., Ltd. will participate in "Testing Expo China—Automotive 2025" to be held at the Shanghai World Expo Exhibition and Convention Center from August 27 (Wednesda...[Details]
When it comes to batteries, they're no strangers to car owners. But how should batteries be maintained? How often should they be replaced? What bad habits can affect their lifespan? And what's the ...[Details]
Reasons for the wear of the roller press reducer shaft:
1. Since the expansion sleeve is subjected to a large torque, the mating surfaces of the shaft and the sleeve move relative to each other...[Details]
ADI Reference Circuit
京公网安备 11010802033920号
EEWORLD
