The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
W.FL Series
Up to 6 GHz Transmission Speed
Occupied Mounting Area
s
Features
1. Nominal mated height of 1.4 mm (Max. 1.5 mm)
2. Small mounting area
The receptacle occupies an area of 3.4mm
2
.
Mated height comparison (with U.FL Series)
3. Lightweight
(MAX1.55)
4. Accepts high frequency transmission.
To meet the frequency requirements of a wide variety of
miniature devices, the connectors offer high frequency
performance from DC to 6 GHz, with a V.S.W.R. of
1.35max.
W.FL Series
(MAX2.0)
U.FL Series
Receptacle:
Right-angle plug:
5.6 mg
18.6 mg
1.4
U.FL-LP(V)-040
W.FL-LP-040
1.9
Plug
2.85
Cable
(MAX1.55)
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic placement
equipment.
6. Plugs are terminated with ultra-fine coaxial
(fluorinated resin insulated) cable
Standard ultra-fine coaxial cable of 0.81 mm diameter
(single braid shielding) is used for the plug termination,
assuring complete electrical and mechanical connection.
1.4
8. Verification of the fully mated condition
Dia. 0.81
W.FL-R-SMT-1
Receptacle
s
Applications
Cellular phones, PHS, mobile phones, wireless
communication devices, electronic measuring instruments,
GPS, wireless LAN, Bluetooth and any application requiring
high frequency transmission using small coaxial connectors.
2009.2w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL SeriesqUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
sSpecifications
Nominal characteristic impedance
Ratings
Frequency range
DC to 6 GHz
Operating humidity
90% RH max.
50
ohms
Operating temperature range
-40°C to +90°C
Item
1. Contact resistance
2. Insulation resistance
Specification
Center contact: 20m ohms max.
Outer contact: 10m ohms max.
500M
ohms
min.
1.3 Max.
1.35 Max.
Center contact: 25m ohms max.
Outer contact: 15m ohms max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1
µs
or longer
No damage, cracks, or parts dislocation
No electrical discontinuity of 1
µs
or longer
No damage, cracks, or parts dislocation
Insulation resistance: 10M ohms min. (high humidity)
Insulation resistance: 500M ohms min. (dry)
No damage, cracks, or parts dislocation
No damage, cracks, or parts dislocation
Contact resistance: 25m ohms max. (Center)
15m ohms max. (Outer)
No excessive corrosion
Contact resistance
10mA max.
100V DC
200V AC / 1 minute
Up to 3 GHz
3 to 6 GHz
20 cycles
Conditions
3. Withstanding voltage No flashover or insulation breakdown
4. V.S.W.R.
*
5. Durability
6. Vibration
Frequency: 10 to 100 Hz, single amplitude of 1.5mm
Acceleration: 59 m/s
2
, in each of 3 axis
5 cycles
Acceleration of 735 m/s
2
, 11 ms continuous time
Waveform: sine half-wave, 3 cycles in each of the
3 axis
96 hours at temperature of +40°C and humidity of 95%
Temperature:-40°C/+5°C to +35°C/+90°C/+5°C to +35°C
Time: 30 min./ 3 min.
/
30 min.
/
3 min.
5 cycles
5% salt water solution, 48 hours
7. Shock
8. Humidity
9. Temperature cycle
10. Salt spray test
*V.S.W.R.
Measurement System
Measured as shown on the block diagram below.
Network Analyzer
Test Set
Test Port
D.U.T
Test Port Cable
Termination
Note1: Measurement way of a W.FL Cable assembly (plug)
W.FL Cable assembly (plug) is measured with SMA conversion adapters
mated with W.FL plugs at both ends of a 100cm coaxial cable harness
Note2: Measurement way of a W.FL receptacle
W.FL receptacle, which is mounted on a 50 ohms glass epoxy board, is
measured with a SMA conversion adapter.
sMaterials
/ Finishes
q
Plug – right angle
Part
Shell
Female center contact
Insulator
Material
Phosphor bronze
Phosphor bronze
PBT
Finish
Silver plated
Gold plated
Color: Black
Remarks
-------
-------
UL94V-0
q
Receptacle
Part
Male center contact
Insulator
Shell
Material
Brass
LCP
Phosphor bronze
Finish
Gold plated
Color: Black
Silver plated
Remarks
-------
UL94V-0
-------
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the
W.FL SeriesqUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sReceptacle
BRecommended
PCB
mounting pattern
0.85
0.3
0.25
2.6
1.4
1.3
1.7
2
0.5
0.3
1.7
2
SIG
1.3
GND
1.3
0.65
GND
No conductive traces in this area
SIG
Note : Receptacles of (10) specification are sold by the reel
(2,000 pieces).
Order by reel.
Recommended screen thickness: 0.1mm to 0.12mm
All dimensions: mm
Part Number
W.FL-R-SMT-1(10)
W.FL-R-SMT-1(40)
CL No.
CL331-0482-6-10
CL331-0482-6-40
Packaging
Reel (2000 pieces/reel)
Reel (5000 pieces/reel)
Weight / EA
5.6 mg
1.5
RoHS
YES
BPackaging
Specifications
Embossed Carrier Tape Dimensions
2
1.75
4
Ø1
.5
Center contact terminal
12
5.5
8
Unreeling direction
Reel Dimensions
1.8
Ø1
3
14
1.8
14
Ø21
Ø330
Ø13
Ø21
W.FL-R-SMT-1(10):
Reel material: Corrugated board
W.FL-R-SMT-1(40):
Reel material: Plastic
Ø330
All dimensions: mm
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS
Coaxial
www.hirose-connectors.com, or contact your Hirose sales represent
W.FL SeriesqUltra Small Surface Mount
search at
Connectors – 1.4mm Mated Height
sPlug
Assembly (Plug)
2
2.85
1.15
Plugs can be ordered only as terminated cable assemblies.
All dimensions: mm
sHow
to Specify Plug Cable Assembly
Double-ended cable assembly
Single-ended cable assembly
L
L
qOrdering
Information
qStandard
tolerances for (L)
(Note 2)
(L)
Standard Tolerance
±4mm (Note 1)
±8mm
±12mm
±1.5% of (L)
W.FL -- 2LP -- 04N
[ ]
T -- A -- (L)
1
1
Series name
2
Assembly type
3
Cable type
4
Cable color
5
Total length (mm)
2
W.FL
LP
: Single ended
L=35mm to 200mm
L=200mm to 500mm
L=500mm to 1000mm
L= Longer than 1000mm
3
4
5
2LP : Double ended
04N : Dia. 0.81mm ultra-fine coaxial cable
1: White, 2: Black
Length (L)
Note1:Minimum available length (L) is 35mm
Note2:Contact nearest HRS representative if different
tolerances are required.
Note3:Contact Nearest HRS representative if one end
requires preparation.
Part No. of Cable Assembly
W.FL-2LP-04N1T-A-(L)
Description
Dia. 0.81mm double ended coaxial cable, color: white
RoHS
YES
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS
Coaxial
www.hirose-connectors.com, or contact your Hirose sales represent
W.FL SeriesqUltra Small Surface Mount
search at
Connectors – 1.4mm Mated Height
sConversion
Adapters
q
SMA Conversion Adapter (W.FL side jack – SMA side plug)
(10.3)
8HEX
W.FL
SMA
Note:Used for performance measurements only.
The W.FL mating side has lower retention
force than the regular product when mated to
the corresponding part.
Part No.
HRMP-W.FLJ(40)
CL No.
311-0367-3-40
RoHS
YES
q
SMA Conversion Adapter (W.FL side plug – SMA side jack)
Three wires are drawn from LA22, LA23 and LA24 of LA[0:25] of mpc8313e and connected to the HPI pin of DSP. If the chip select base address of DSP is set to 0xF2000000, how is the base address of UHPI...
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 19:53[/i] Google is a veritable acquisition maniac. Before acquiring Android in 2005, it mainly acquired technologies and teams around the...
[i=s]This post was last edited by Lazy Cat Love Flying on 2019-2-20 16:05[/i] Well, this is another offensive topic, but let me talk about my own views. The chat here refers to the chat about the "tec...
I'd like to ask an expert, I disassembled a copycat satellite live decoder and only saw HTV903 and AVL1108EGA. There is also a chip with AV2020 written on it. Is it a 5810 single crystal oscillator? I...
Haha, time flies, today is the last day of October. After a month of thinking, today I will talk about my money-saving shopping experience:1. Purchase of RC componentsThis type of component is general...
Wave soldering is a crucial electronic component soldering technique used in the production of a wide range of electronic devices, from home appliances to computers to avionics. The process is wide...[Details]
As more and more consumers purchase new energy vehicles, the safety of electric vehicles has become a major concern. This has been particularly prominent following a series of electric vehicle fire...[Details]
As the number of cars increases, environmental pressures are also increasing. At this time, some people are saying that new energy vehicles are energy-efficient and environmentally friendly, and ar...[Details]
With the rapid development of technology, automotive intelligence is increasing at an unprecedented rate. This not only enhances vehicle functionality and comfort, but also places higher deman...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
Puttshack's Trackaball uses the Nordic nRF54L15 system-on-chip (SoC) to monitor sensors and enable Bluetooth low energy connectivity, while the nPM2100 power management integrated circuit (PMIC) ...[Details]
On August 20, it was reported that the specifications of Intel's upcoming Panther Lake mobile processor appeared on the Intel GFX CI website, which mainly focuses on Intel's open source Linux drive...[Details]
0 Introduction
With a rapidly aging population, a young couple is now required to care for an increasing number of elderly people, leading to a growing difficulty in providing care for them. E...[Details]
Today,
the Intel®
Universal
Quick Connector (UQD) Interchangeability Alliance was officially established
. At the inaugural ceremony, Intel and its first certified partners—Invicta...[Details]
We know that the power output by the engine does not directly act on the wheels to drive the car, but needs to pass through a series of power transmission mechanisms. So how is the power transmitte...[Details]
Today, the voltage of electronic products continues to rise to 400V, 600V and even 1000V, so there are few electronic load models that can handle such high voltages. Many people consider connecting...[Details]
With rapid economic development, the types of pollution sources are increasing, especially in chemical and industrial zones and their surroundings. The patterns of pollution and the types of ecolog...[Details]
At the 2025 KeyBanc Investor Conference,
ON
Semiconductor CEO Hassane S. El-Khoury, framing global industrial transformation as the basis for
his strategic layout in two high-growth sect...[Details]
Abstract: This design uses field-effect transistors to create a tube-like audio power amplifier. The preamplifier uses a single Class A transistor, while the power stage utilizes Class AB push-pull...[Details]