Rev D
DCW150 & DCWD150 SERIES
DC/DC Converter
200 Watts, Single Output
4:1 Input Voltage Range
DCWD150
DCW150
Size: 2.56in x 3.86in x 0.67in (65mm x 98mm x 17mm)
Size: 2.07in x 3.86in x 0.67in (52.5mm x 98mm x 17mm)
OPTIONS
•
Negative Logic Remote ON/OFF
•
Heatsink
FEATURES
•
•
•
•
•
•
•
•
•
200 Watts Maximum Output Power
4:1 Wide Input Voltage Range
High Efficiency up to 89%
CV+CC Mode
No Minimum Load Required
2250VDC Input to Output Isolation
Adjustable Output Voltage
Reverse Polarity Protection
Remote On/Off
•
Six-Sided Continuous Shield
•
Built-In EN55032 Class A Filter
•
Over Voltage, Over Load, Short Circuit, Over Temperature
and Under Voltage Protection
•
UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
•
CE Marked
•
Compliant to RoHS & REACH
•
Compliance to EN50155 and EN45545-2 Railway
Standard
APPLICATIONS
•
•
•
•
•
•
•
Railway System
Automation
Telecom/Datacom
Industrial
IPC
Measurement
Battery Charger
DESCRIPTION
The DCW150 and DCWD150 series of DC/DC converters provides up to 200 watts of output power. This
series consists of single output models with a wide 4:1 input voltage range. Each model in this series
features an adjustable output voltage, constant current mode output limit, and 2250VDC input to output
isolation. The models are also protected against over voltage, over load, short circuit, over temperature,
and under voltage conditions and are compliant to both RoHS and REACH. The DCW150 and DCWD150
series are CE marked, have UL60950-1, EN60950-1 and IEC60950-1 safety approvals, and meet
EN50155 and EN45545-2 railway standards.
MODEL SELECTION TABLE
Model Number
DCW24S12-150
DCWD24S12-150
DCW24S15-150
DCWD24S15-150
DCW24S24-150
DCWD24S24-150
DCW24S28-150
DCWD24S28-150
DCW24S48-150
DCWD24S48-150
DCW48S12-150
DCWD48S12-150
DCW48S15-150
DCWD48S15-150
DCW48S24-150
DCWD48S24-150
DCW48S28-150
DCWD48S28-150
DCW48S48-150
DCWD48S48-150
DCW110S12-150
DCWD110S12-150
DCW110S15-150
DCWD110S15-150
DCW110S24-150
DCWD110S24-150
DCW110S28-150
DCWD110S28-150
DCW110S48-150
DCWD110S48-150
2/25/2020
Input Voltage Range Output Voltage Output Current
(1)
Ripple & Noise
12VDC
15VDC
24VDC
(9~36VDC)
24VDC
28VDC
48VDC
12VDC
15VDC
48VDC
(18~75VDC)
24VDC
28VDC
48VDC
12VDC
15VDC
110VDC
(43~160VDC)
24VDC
28VDC
48VDC
12.5A
10A
6.3A
5.4A
3.2A
12.5A
10A
6.3A
5.4A
3.2A
12.5A
10A
6.3A
5.4A
3.2A
100mVp-p
100mVp-p
200mVp-p
200mVp-p
350mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
350mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
350mVp-p
No Load Input
Current
70mA
80mA
95mA
120mA
130mA
50mA
60mA
60mA
70mA
70mA
25mA
25mA
25mA
25mA
35mA
Maximum Capacitive Load Efficiency
40000µF
26000µF
10000µF
7600µF
2600µF
40000µF
26000µF
10000µF
7600µF
2600µF
40000µF
26000µF
10000µF
7600µF
2600µF
86%
86%
87%
87%
86%
88%
89%
89%
89%
88%
88%
89%
89%
89%
88%
Page 1 of 9
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website:
www.wallindustries.com
• e-mail:
sales@wallindustries.com
Rev D
DCW150 & DCWD150 SERIES
DC/DC Converter
200 Watts, Single Output
4:1 Input Voltage Range
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input, and Full Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Start-Up Voltage
Shutdown Voltage
Input Surge Voltage
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Voltage Adjustability
Output Power
Output Current
Maximum Capacitive Load
Ripple & Noise (20MHz bandwidth)
Transient Response Recovery Time
Start-Up Time
TEST CONDITIONS
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
1 second, max.
Min
9
18
43
Typ
24
48
110
Max
Unit
VDC
VDC
VDC
VDC
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
7.9
15.6
33.0
36
75
160
9
18
43
8.2
8.5
16.2
16.8
34.5
36.0
50
100
185
Pi Type
See Table
+1.0
+0.2
+0.4
+20
200
See Table
See Table
100
200
350
200
35
35
+0.02
Open or 3~12VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~12VDC
1
3.5
Low Line to High Line at Full Load
No Load to Full Load
Use a resistor across on the Trim1 and Trim2 to adjust the output voltage
-1.0
-0.2
-0.4
%
%
%
%
W
Measured by 20MHz bandwidth
25% Load Step Change
Constant Resistive Load
12V, 15V
24V, 28V
48V
Power Up
Remote ON/OFF
mVp-p
µS
ms
%/ºC
Temperature Coefficient
REMOTE ON/OFF CONTROL
(2)
DC-DC ON
Positive Logic
(Standard)
DC-DC OFF
DC-DC ON
Negative Logic
(Option)
DC-DC OFF
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
Short Circuit Protection
Over Load Protection
% of Iout rated, CC Mode
Over Voltage Protection
% of Vout (nominal); Hiccup
Over Temperature Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Case Temperature
Maximum Case Temperature
Storage Temperature Range
Relative Humidity
Thermal Shock
Shock
Vibration
Only mount on the iron base-plate
Thermal Impedance
Mount on the iron base-plate and top side with 7G-0058A heat-sink
MTBF
MIL-HDBK-217, Full Load
-0.02
-0.5
mA
mA
Continuous, Automatic Recovery
105
120
%
125
140
%
+110
ºC
-40
-55
5
+100
+100
ºC
ºC
ºC
%RH
+125
95
MIL-STD-810F
EN61373, MIL-STD-810F
EN61373, MIL-STD-810F
2.55
ºC/W
2.0
495,400
Hours
2/25/2020
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website:
www.wallindustries.com
• e-mail:
sales@wallindustries.com
Page 2 of 9
Rev D
DCW150 & DCWD150 SERIES
DC/DC Converter
200 Watts, Single Output
4:1 Input Voltage Range
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input, and Full Load unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
24VDC Input
Switching Frequency
48VDC Input
110VDC Input
Isolation Voltage
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
Weight
1 minute
500VDC
DCW150
DCWD150
With Filter (“-F” Suffix)
DCW150
DCWD150
TEST CONDITIONS
48Vout
Others
48Vout
Others
All
Input to Output
Input (Output) to Case
Min
248
270
248
270
203
2250
1600
1
Typ
Max
Unit
See Table
275
303
300
330
275
303
300
330
225
248
kHz
VDC
3500
7.94oz (225g)
7.76oz (220g)
11.46oz (325g)
2.56in x 3.86in x 0.67in
(65mm x 98mm x 17mm)
2.07in x 3.86in x 0.67in
(52.5mm x 98mm x 17mm)
Aluminum
Aluminum
Silicone (UL94 V-0)
Six-Sided
GΩ
pF
Dimensions (L x W x H)
Case Material
Base Material
Potting Material
Shielding
SAFETY & EMC CHARACTERISTICS
Safety Approvals
Standard Approvals
EMI
ESD
Radiated Immunity
Fast Transient
(4)
Surge
(4)
Conducted Immunity
Power Frequency Magnetic Field
IEC/UL/EN60950-1
(3)
EN50155
EN45545-2
EN55011, EN550322 without external components
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Air ±8kV and Contact ±6kV
10 V/m
±2kV
EN55024 ±1kV and EN50155 ±2kV
10 Vr.m.s
100A/m continuous; 1000A/m 1 second
DC-DC Module
CB:UL (Demko)
Class A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
NOTES
Measured at Full Load.
The remote ON/OFF control pin voltage is referenced to –Vin. The negative logic is optional.
This product is Listed to applicable standards and requirements by UL.
An external input filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. We suggest the following:
DCW(D)150-24Sxx: Nippon chemi-con KY series, 470µF/50V
DCW(D)150-48Sxx: Nippon chemi-con KY series, 220µF/100V
DCW(D)150-110Sxx: Nippon chemi-con KXJ series, 150µF/200V
CAUTION:
This power module is not internally fused; an input line fuse must always be used. If the load has sourcing capability (ex. Battery or super
capacitor), an output line fuse must always be used.
*Due
to advances in technology, specifications subject to change without notice.
(1)
(2)
(3)
(4)
2/25/2020
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website:
www.wallindustries.com
• e-mail:
sales@wallindustries.com
Page 3 of 9
Rev D
DCW150 & DCWD150 SERIES
DC/DC Converter
200 Watts, Single Output
4:1 Input Voltage Range
DERATING CURVES
DCW(D)48S24-150 Derating Curve (See Thermal Consideration)
DCW(D)48S24-150 Derating Curve with Heat-Sink
(See Thermal Consideration)
EFFICIENCY GRAPHS
DCW(D)48S24-150 Efficiency vs. Input Voltage
DCW(D)48S24-150 Efficiency vs. Output Load
CHARACTERISTIC CURVE
DCW(D)xxS12-150 Vout vs Iout
DCW(D)xxS15-150 Vout vs. Iout
2/25/2020
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website:
www.wallindustries.com
• e-mail:
sales@wallindustries.com
Page 4 of 9
Rev D
DCW150 & DCWD150 SERIES
DC/DC Converter
200 Watts, Single Output
4:1 Input Voltage Range
DCW(D)xxS24-150 Vout vs. Iout
DCW(D)xxS28-150 Vout vs. Iout
DCW(D)xxS48-150 Vout vs. Iout
MODE
CV Region
CC Region
Hiccup Protection
DESCRIPTION
In normal operation. The output current is shown in data
sheet.
If the output load current are over rating, the output current
will keep in a constant value and output voltage will fall
If the output resistance becomes short, it will operate in
hiccup protection
CONDITION
Resistance Load > Vout/Iout (CC Point)
Resistance Load < Vout/Iout (CC Point)
DCW(D)xxS12-150, DCW(D)xxS15-150:
Vout< 4.3V (typ.) to Output Short
DCW(D)xxS24-150, DCW(D)xxS28-150:
Vout < 8.0V (typ.) to Output Short
DCW(D)xxS48-150:
Vout <13V (typ.) to Output Short
FUSE CONSIDERATION
This power module is not internally fused. An input line fuse must always be used.
This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an
integrated part of sophisticated power architecture.
To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input
line fuse.
The suggested input line fuse is below:
Model
Fuse Rating (A)
Fuse Type
DCW(D)150-24Sxx
30
Fast-Acting
DCW(D)150-48Sxx
15
Fast-Acting
DCW(D)150-110Sxx
6.3
Slow-Blow
The table is based on the information provided in this data sheet on inrush energy and maximum DC input current at low Vin.
2/25/2020
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website:
www.wallindustries.com
• e-mail:
sales@wallindustries.com
Page 5 of 9
京公网安备 11010802033920号
EEWORLD
