E
n
n
n
n
n
ADVANCE INFORMATION
SMART 5 BOOT BLOCK
FLASH MEMORY FAMILY
2, 4, 8 MBIT
28F200B5, 28F400B5, 28F800B5, 28F004B5
SmartVoltage Technology
Smart 5 Flash: 5 V Reads,
5 V or 12 V Writes
Increased Programming Throughput
at 12 V V
PP
Very High-Performance Read
2-, 4-Mbit: 60 ns Access Time
8-Mbit: 70 ns Access Time
x8 or x8/x16-Configurable Data Bus
Low Power Consumption
Max 60 mA Read Current at 5 V
Auto Power Savings: <1 mA Typical
Standby Current
Optimized Array Blocking Architecture
16-KB Protected Boot Block
Two 8-KB Parameter Blocks
96-KB and 128-KB Main Blocks
Top or Bottom Boot Locations
Extended Temperature Operation
–40 °C to +85 °C
Industry-Standard Packaging
40, 48-Lead TSOP, 44-Lead PSOP
n
n
Extended Block Erase Cycling
100,000 Cycles at Commercial Temp
10,000 Cycles at Extended Temp
Hardware Data Protection Feature
Absolute Hardware-Protection for
Boot Block
Write Lockout during Power
Transitions
Automated Word/Byte Program and
Block Erase
Command User Interface
Status Registers
Erase Suspend Capability
SRAM-Compatible Write Interface
Reset/Deep Power-Down Input
Provides Low-Power Mode and
Reset for Boot Operations
Pinout Compatible 2, 4, and 8 Mbit
ETOX™ Flash Technology
0.6
µ
ETOX IV Initial Production
0.4
µ
ETOX V Later Production
n
n
n
n
n
n
n
Intel’s Smart 5 boot block flash memory family provides 2-, 4-, and 8-Mbit memories featuring high-density,
low-cost, nonvolatile, read/write storage solutions for a wide range of applications. Their asymmetrically-
blocked architecture, flexible voltage, and extended cycling provide highly flexible components suitable for
embedded code execution applications, such as networking infrastructure and office automation.
Based on Intel’s boot block architecture, the Smart 5 boot block memory family enables quick and easy
upgrades for designs that demand state-of-the-art technology. This family of products comes in industry-
standard packages: the 40-lead TSOP for very space-constrained 8-bit applications, 48-lead TSOP, ideal for
board-constrained higher-performance 16-bit applications, and the rugged, easy to handle 44-lead PSOP.
December 1997
Order Number: 290599-004
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of
Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or
infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life
saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
The 28F200B5, 28F400/004B5, 28F800B5 may contain design defects or errors known are errata. Current characterized errata
are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be
obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 80217-9808
or call 1-800-548-4725
or visit Intel’s website at http://www.intel.com
COPYRIGHT © INTEL CORPORATION 1997, 1998
CG-041493
*Third-party brands and names are the property of their respective owners.
E
SMART 5 BOOT BLOCK MEMORY FAMILY
CONTENTS
PAGE
PAGE
4.0 DESIGN CONSIDERATIONS ........................24
4.1 Power Consumption ...................................24
4.1.1 Active Power .......................................24
4.1.2 Automatic Power Savings (APS) .........24
4.1.3 Standby Power ....................................25
4.1.4 Deep Power-Down Mode.....................25
4.2 Power-Up/Down Operation.........................25
4.2.1 RP# Connected to System Reset ........25
4.3 Board Design .............................................25
4.3.1 Power Supply Decoupling....................25
4.3.2 VPP Trace on Printed Circuit Boards...25
5.0 ELECTRICAL SPECIFICATIONS..................26
5.1 Absolute Maximum Ratings ........................26
5.2 Operating Conditions..................................26
5.3 Capacitance ...............................................27
5.4 DC Characteristics—Commercial and
Extended Temperature..............................27
5.5 AC Characteristics—Read Operations—
Commercial and Extended Temperature ...31
5.6 Erase and Program Timings—Commercial
and Extended Temperature .......................32
5.7 AC Characteristics—Write Operations—
Commercial and Extended Temperature ...33
6.0 ORDERING INFORMATION..........................35
7.0 ADDITIONAL INFORMATION .......................36
APPENDIX A: Write State Machine: Current-
Next State Chart ..........................................37
APPENDIX B: Product Block Diagram..............38
1.0 INTRODUCTION .............................................5
1.1 New Features in the Smart 5 Memory
Products......................................................5
1.2 Product Overview.........................................5
2.0 PRODUCT DESCRIPTION..............................6
2.1 Pin Descriptions ...........................................6
2.2 Pinouts.........................................................8
2.3 Memory Blocking Organization...................10
2.3.1 One 16-KB Boot Block.........................10
2.3.2 Two 8-KB Parameter Blocks................10
2.3.3 Main Blocks - One 96-KB + Additional
128-KB Blocks....................................10
3.0 PRINCIPLES OF OPERATION .....................13
3.1 Bus Operations ..........................................13
3.1.1 Read....................................................13
3.1.2 Output Disable.....................................14
3.1.3 Standby ...............................................14
3.1.4 Word/Byte Configuration......................14
3.1.5 Deep Power-Down/Reset ....................14
3.1.6 Write....................................................14
3.2 Modes of Operation....................................16
3.2.1 Read Array ..........................................16
3.2.2 Read Identifier .....................................16
3.2.3 Read Status Register ..........................16
3.2.4 Word/Byte Program .............................17
3.2.5 Block Erase .........................................17
3.3 Boot Block Locking ....................................23
3.3.1 V
PP
= V
IL
for Complete Protection .......24
3.3.2 WP# = V
IL
for Boot Block Locking .......24
3.3.3 RP# = V
HH
or WP# = V
IH
for Boot Block
Unlocking ...........................................24
3.3.4 Note for 8-Mbit 44-PSOP Package ......24
ADVANCE INFORMATION
3
SMART 5 BOOT BLOCK MEMORY FAMILY
E
Description
REVISION HISTORY
Number
-001
-002
Original Version
Minor changes throughout document.
Section 3.1.5 and Figure 14 redone to clarify program/erase operation abort.
Information added to Table 2, Figure 1, and Section 3.3 to clarify WP# on 8-Mbit,
44-PSOP.
Read and Write Waveforms changed to numbered format.
Typical numbers removed from DC Characteristics and Erase/Program Timings.
Minor text changes throughout document.
Figure 1, 44-PSOP pinout: mistake on pin 3 on 2-Mbit pinout corrected from A
17
to NC.
Specs t
EHQZ
and t
GHQZ
improved.
Explanations of program/erase abort commands reworked in Table 6, Command
Codes.
Specifications for 28F004B5 40-TSOP version added; Erase suspend text and
flowchart updated for clarity (Section 3.2.5.1, Table 6, Figure 10)
-003
-004
4
ADVANCE INFORMATION
E
1.0
1.1
SMART 5 BOOT BLOCK MEMORY FAMILY
•
•
A delay is required if the part is reset during an
in-progress program or erase operation.
On the fly word-byte mode switching is no
longer supported. Word-byte mode must be
configured at power-up and remain stable
during operation.
Write operations are no longer specified as
WE#- or CE#-controlled in favor of a simpler
“unified” write method, which is compatible
with either of the old methods.
INTRODUCTION
This datasheet contains specifications for 2-, 4-,
and 8-Mbit Smart 5 boot block flash memories.
Section 1.0 provides a feature overview. Sections
2.0, 3.0, and 4.0 describe the product and
functionality. Section 5.0 details the electrical and
timing specifications for both commercial and
extended temperature operation. Finally, Sections
6.0 and 7.0 provide ordering and reference
information.
•
New Features in the
Smart 5 Memory Products
1.2
Product Overview
The Smart 5 boot block flash memory family offers
identical features with the BV/CV/BE/CE
SmartVoltage products, except the Smart 5 boot
block -B5 parts only support 5 V V
CC
read voltage.
The following differences distinguish the Smart 5
boot block products from their predecessors:
The Smart 5 boot block memory family provides
pinout-compatible flash memories at the
2-, 4-, and 8-Mbit densities. The 28F200B5,
28F400B5, and 28F800B5 can be configured to
operate either in 16-bit or 8-bit bus mode, with the
data divided into individually erasable blocks. The
28F004B5 provides 8-bit operation in a compact
package.
Table 1. Smart 5 Boot Block Family: Feature Summary
Feature
V
CC
Read Voltage
V
PP
Prog/Erase Voltage
Bus-width
Speed (ns)
Commercial
Extended
Memory Arrangement
Blocking
Boot
Parameter
Main
Boot Location
Locking
Operating Temperature
Erase Cycling
Packages
80
8- or 16-bit
28F200B5
28F400B5
28F800B5
28F004B5
Reference
Section 5.2
Section 5.2
8-bit
60, 80
not available
x8: 512K x 8
1 x 16 KB
2 x 8 KB
1 x 96 KB
3 x 128 KB
Section 2.3,
Figs. 4-7
Table 2
Section 5.6
Section 5.6
5 V
±
5%, 5 V
±
10%
5 V
±
10% or 12 V
±
5%, auto-detected
8- or 16-bit
8- or 16-bit
70, 90
80
90
60, 80
x8: 256K x 8
x8: 512K x 8
x8: 1M x 8
x16: 128K x 16 x16: 256K x 16 x16: 512K x 16
1 x 16 KB
2 x 8 KB
1 x 96 KB
1 x 128 KB
1 x 16 KB
2 x 8 KB
1 x 96 KB
3 x 128 KB
1 x 16 KB
2 x 8 KB
1 x 96 KB
7 x 128 KB
Top or Bottom boot locations available
Boot Block lockable using WP# and/or RP#
All other blocks protectable using V
PP
switch
Commercial: 0 °C – +70
°C,
Extended: -40 °C – +85
°C
100,000 cycles at Commercial, 10,000 cycles at Extended
44-PSOP, 48-TSOP
40-TSOP
Figs. 1-2
5
Section 3.3
Section 5.2
ADVANCE INFORMATION
京公网安备 11010802033920号
EEWORLD
