30KPA28A thru 30KPA288CA, e3
30kW Transient Voltage Suppressor
SCOTTSDALE DIVISION
FOR
DESCRIPTION
These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are
designed for applications requiring protection of voltage-sensitive electronic
devices that may be damaged by harsh or severe voltage transients
including lightning per IEC61000-4-5 and class levels with various source
impedances described herein. This series is available in 33 to 400 volt
standoff voltages (V
WM
) in both unidirectional and bi-directional with either
5% or 10% tolerances of the Breakdown Voltage (V
BR
). Microsemi also
offers numerous other TVS products to meet higher or lower power
demands and special applications.
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
http://www.microsemi.com
APPEARANCE
WWW .
Microsemi
.C
OM
FEATURES
•
@ 25
0
C UNLESS OTHER WISE SPECIFIED
APPLICATIONS / BENEFITS
•
•
•
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: 30KPA33A - 30KPA400A or CA
Class 5: 30KPA33A - 30KPA400A or CA
Class 5: 30KPA33A - 30KPA220A or CA (long
distance)
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1,2, 3: 30KPA33A to 30KPA400A or CA
Class 4: 30KPA33A to 30KPA220A or CA
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: 30KPA33A to 30KPA400A or CA
Class 3: 30KPA33A to 30KPA220A or CA
Class 4: 30KPA33A to 30KPA110A or CA
Available in both Unidirectional and Bidirectional
construction (Bidirectional with a CA suffix)
•
Suppresses transients up to 30 kW @ 10/1000 µs and
200 kW @ 8/20 µs (see Figure 1)
•
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
•
Glass passivated chip junction in a P600 package
•
Reverse leakage below 2 µA for voltages above 73
volts V
BR
•
Optional 100%
screening for avionics grade
is
available by adding MA prefix to part number for
added 100% temperature cycle -55
o
C to +125
o
C (10X)
as well as surge (3X) and 24 hours HTRB with post
test V
Z
& I
R
(in the operating direction for unidirectional
or both directions for bidirectional)
•
Options for screening in accordance with MIL-PRF-
19500 for JANTX are available by adding MX prefix to
the part number.
RoHS Compliant devices available by adding “e3” suffix
•
•
MAXIMUM RATINGS
•
•
•
•
•
Peak Pulse Power dissipation at 25
º
C: 30,000 watts
at 10/1000
μs
(also see Figures 1 and 2)
Impulse repetition rate (duty factor): 0.05%
t
clamping
(0 volts to V
(BR)
min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating & Storage temperature: -65
º
C to +150
º
C
º
Thermal resistance: 17.5 C/W junction to lead, or
º
77.5 C/W junction to ambient when mounted on FR4
PC board with 4 mm
2
copper pads (1oz) and track
width 1 mm, length 25 mm
Steady-State Power dissipation: 7 watts at T
L
=
27.5
o
C, or 1.61 watts at T
A
= 25
º
C when mounted on
FR4 PC board described for thermal resistance
Forward Surge: 400 Amps 8.3 ms half-sine wave for
unidirectional devices only
Solder temperatures: 260
º
C for 10 s (maximum)
•
•
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting
epoxy P600 package meeting UL94V-0
FINISH: Tin-Lead or RoHS compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
MARKING:
Polarity band when required
MSC Microsemi
Part Number 30KPAXX
WW/YY Date code
POLARITY: Band denotes cathode. Bidirectional not
marked for polarity
WEIGHT: 0.07oz or 2.5grams (approximate)
TAPE & REEL option: Standard per EIA-296 for axial
package (add “TR” suffix to part number)
See package dimension on last page
•
30KP33A - 30KP400CA, e3
•
•
•
•
•
•
•
Copyright
©
2009
09-01-2009 REV A, SD89A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
