HCPL-5300, HCPL-5301, HCPL-530K, 5962-96852
Intelligent Power Module and Gate Drive
Interface Hermetically Sealed Optocouplers
Data Sheet
Description
The HCPL-530X devices consist of a GaAsP LED optically
coupled to an integrated high gain photo detector in a
hermetically sealed package. The products are capable of
operation and storage over the full military temperature
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from the DLA Drawing 5962-96852. All devices are man-
ufactured and tested on a MIL-PRF-38534 certified line
and are included in the DLA Qualified Manufacturers
List QML-38534 for Hybrid Microcircuits. Minimized pro-
pagation delay difference between devices make these
optocouplers excellent solutions for improving inverter
efficiency through reduced switching dead time. An on
chip 20 k output pull-up resistor can be enabled by
shorting output pins 6 and 7, thus eliminating the need
for an external pull-up resistor in common IPM applica-
tions. Specifications and performance plots are given for
typical IPM applications.
Features
Performance specified over full military temperature
Range: -55° C to +125° C
Fast maximum propagation delays
t
PHL
= 450 ns,
t
PLH
= 650 ns
Minimized pulse width distortion (PWD = 450 ns)
High common mode rejection (CMR): 10 kV/s at V
CM
=
1000 V
CTR > 30% at I
F
= 10 mA
1500 Vdc withstand test voltage
Manufactured and tested on a MIL-PRF-38534 certified
line
Hermetically sealed packages
Dual marked with device part number and DLA
drawing number
QML-38534, Class H and K
HCPL-4506 function compatibility
8
20 k
Schematic Diagram
1
Applications
Military and space
High reliability systems
Harsh industrial environments
Transportation, medical, and life critical systems
IPM isolation
Isolated IGBT/MOSFET gate drive
AC and brushless DC motor drives
Industrial inverters
2
7
3
6
4
SHIELD
5
Truth Table
LED
ON
OFF
V
O
L
H
The connection of a 0.1
F bypass capacitor between pins 5 and 8 is recommended.
CAUTION:
It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Device Marking
Avago DESIGNATOR
Avago P/N
DLA SMD*
DLA SMD*
PIN ONE/
ESD IDENT
A QYYWWZ
XXXXXX
XXXXXXX
XXX XXX
50434
COMPLIANCE INDICATOR,*
DATE CODE, SUFFIX (IF NEEDED)
COUNTRY OF MFR.
Avago CAGE CODE*
Hermetic Optocoupler Options
Option
100
Description
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on
commercial and hi-rel product in 8 pin DIP (see drawings below for details).
4.32 (0.170)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
0.20 (0.008)
0.33 (0.013)
7.36 (0.290)
7.87 (0.310)
200
300
Lead finish is solder dipped rather than gold plated. This option is available on commercial and hi-rel product in
8 pin DIP. DLA Drawing part numbers contain provisions for lead finish.
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available
on commercial and hi-rel product in 8 pin DIP (see drawings below for details). This option has solder dipped leads.
4.57 (0.180)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
0.20 (0.008)
0.33 (0.013)
9.65 (0.380)
9.91 (0.390)
4.57 (0.180)
MAX.
5° MAX.
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
1.07 (0.042)
1.32 (0.052)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
Note: Solder contains lead.
3
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
