and One-Stage and Two-Stage and One-Stage and Two-Stage
Isolator
Isolator
Isolator
Isolator
Signal central wavelength,
λ
C
Signal wavelength range,
λ
S
Pump channel
wavelength range,
λ
P
Port configuration
Insertion loss at
λ
S
(note
3
)
Max.
Wavelength dependent
Max.
variation at
λ
S
and
C, L, or S bands (note
3
)
Wavelength dependent
Max.
variation at
λ
S
and
C+L band (note
3
)
PDL at
λ
S
(note
3
)
Max.
3
PMD at
λ
S
(note )
Max.
Isolation of isolator
Min.
4
at
λ
S
(note )
Isolation of WDM
Min.
5
at
λ
P
(note )
Insertion loss (C to R) at
λ
P
Max.
PDL (C to R) at
λ
P
Max.
Directivity (P to R) at
λ
S
Min.
Directivity (R to P) at
λ
P
Min.
Optical return loss
Min.
Maximum optical
power (standard)
Maximum optical power
(high power option)
Tensile load
Max.
Operating temperature
Storage temperature
Package dimensions (D x L)
Fiber type
Pigtail color code (bare fiber)
Pigtail color code (loose tube)
Device marking
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1550 nm, L=1590 nm, 1=1570 nm, S=1510 nm)
C, L or S
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1530 to 1580 nm, L=1590±20 nm, 1=C+L=1530 to 1610nm, S=1490 to 1530 nm)
N/A
1465 to 1495 nm 1465 to 1495 nm 950 to 1010 nm
950 to 1010 nm
Backward
(note
1
)
Forward or
backward
(note
2
)
0.6 dB
0.2 dB
Forward or
backward
(note
2
)
0.6 dB
0.15 dB
Forward or
backward
(note
2
)
0.7 dB
0.2 dB
Forward or
backward
(note
2
)
See table on page 2 See table on page 2 0.5 dB
0.2 dB
0.2 dB
0.15 dB
NA
NA
0.25 dB
0.3 dB
0.25 dB
0.3 dB
0.1 dB
0.05 ps
30 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.2 dB
0.05 ps
42 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.06 dB
0.05 ps
30 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
5N
0.08 dB
0.05 ps
45 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
0.06 dB
0.05 ps
30 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
0.08 dB
0.05 ps
45 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
5N
5N
5N
-5 to 70 °C
-40 to 85 °C
5.5 mm x 32 mm for bare fiber and 5.5 mm x 40 mm for bare fiber or loose tube
PureMode Hi 1060 for ports transmitting 980 nm (standard), SMF-28 for all others (standard)
Black (C port); Clear (R & P ports)
Red (C port); Blue (R & P ports)
JDSU logo, JDSU model name and device serial number
Note: Parameters are specified for the signal wavelength range and/or pump wavelength range, all polarization states and operating temperature range without connector.
1
2.
3.
4.
5.
Backward tap: C (input), R (tap) and P (output).
Backward pumped: C (λ
S
input and
λ
P
output), R (λ
P
input) and P (λ
S
output). Forward pumped: C (λ
S
and
λ
P
output), R (λ
P
input) and P (λ
S
input).
Forward: P to C and Backward: C to P.
Forward: C to P and Backward: P to C. The isolation data are specified at 23 °C. The isolation range is
λc
± 12 nm or
λc
± 30 nm for one-stage or two-stage isolator, respectively.
Isolation of WDM is given for both C to P and P to C directions.
AHC SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: AHC-C30R10000
AHC-
Code
C
L
S
1
Signal Wavelength
C-band
L-band
S-band
C+L-bands
Code
J
K
N
Code
0
3
5
Pump Wavelength
No pump option
1480
nm
980
nm
Q
R
S
Code
0
1
2
3
4
5
A
T
Tap Ratio
No
tap
option
1%
2%
3%
4%
5%
1.8%
10%
V
Z
Isolator, Pump Configuration,
Package Length
One-stage, forward-pumped,
32 mm (L)
One-stage, forward-pumped,
40 mm (L)
One-stage, backward-pumped or
tap,
32 mm (L)
One-stage, backward-pumped or
tap,
40 mm (L)
Two-stage, forward-pumped,
40 mm (L)
Two-stage, forward-pumped,
32 mm (L)
Two-stage, backward-pumped
(or
tap),
40 mm (L)
Two-stage, backward-pumped
(or
tap),
32 mm (L)
Code
1
2
4
5
Fiber Pigtail Length
1 meter
2 meters
0.5 meter
1.5 meters
0
Code
0
1
2
3
4
5
8
9
A
B
C
Connectors
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
0
1
Fiber Buffer Type
250 µm bare fiber
900 µm loose
tube
Code
0
H
Power Handling Option
Standard:
150 mW at
980
nm
and 500 mW for
all others
High
Power:
450 mW at
980
nm
and 2000 mW
for all others
Note: Other configuratons and wavelengths are available on custom basis.
SMF-28 and PureMode are registered trademarks of Corning Incorporated.
ST and LC are registered trademarks of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
[size=4] There are two main forms of circuit protection: overvoltage protection and overcurrent protection. Selecting the appropriate circuit protection device is the key to achieving efficient and re...
[backcolor=rgb(222, 240, 251)]The disadvantage of NAND flash memory is that it has a slow read speed. It has only 8 I/O ports, which is much less than NOR. These 8 I/O ports can only complete data tra...
[b][size=18px]Avr128 serial port 1 program, crystal oscillator 16M, the main function is to output the voltage value collected by ADC through the serial port, the serial port assistant cannot receive ...
INT 13,0 - Reset Disk SystemAH = 00DL = drive number (0=A:, 1=2nd floppy, 80h=drive 0, 81h=drive 1)on return:AH = disk operation status(see INT 13,STATUS)CF = 0 if successful= 1 if error- clears reset...
[align=left][color=#000]Design engineers working on high-performance, high-frequency applications in wireless communications, satellite equipment, test and measurement, and defense systems need semico...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
When choosing a laptop battery, you should consider several factors, such as power, appearance, and quality.
Regarding power, we often see that a manufacturer uses values such as the number ...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
I. Introduction
Since RS232 has a short communication distance (only 15 meters according to EAT/TAI-232 standard), and can only perform point-to-point communication, it cannot directly f...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
Digital array radar (DAR) uses digital beam forming (DBF) in both receiving and transmitting modes to achieve flexible distribution and reception of RF signal power in the airspace, obtain excellent t...[Details]
TC9012F is a universal CMOS large-scale integrated circuit for infrared remote control signal transmission, suitable for remote control of TV, VTR, laser player and other equipment. In the market, ...[Details]
At very low temperatures, certain metals and alloys lose their resistance to electric
current
and become
superconductors
. Two parameters that are often measured are the transition ...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
In today's body control module (BCM) designs, savvy engineers are moving away from electromechanical relays whenever possible. Their next step is to eliminate fuses. But is eliminating fuses a nece...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]
The DisplayPort interface standard is approved by the Video Electronics Standards Association (VESA) to provide an open, scalable standard for the entire industry. The development of DisplayPort ca...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
