Cat. No. I524-E1-2
USER’S MANUAL
OMNUC FND-X
SERIES
MODELS FND-Xj (DIO Type)
FND-Xj-SRT (CompoBus/S Type)
POSITION DRIVERS
Thank you for choosing this OMNUC FND-X-series product.
This manual provides details on the installation, wiring, troubleshooting, and maintenance of
OMNUC FND-X-series products along with parameter settings for the operation of the products.
S
Make sure that actual users of this product will read this manual thoroughly and handle and operate the prod-
uct with care.
S
Retain this manual for future reference.
S
This manual describes the specifications and functions of the product and relations with other products. As-
sume that nothing described in this manual is possible.
S
Specifications and functions may change without notice to improve product performance.
S
Forward and reverse rotation of AC Servomotors described in this manual are defined as looking at the end of
the output shaft of the motor as follows: counterclockwise rotation is forward and clockwise rotation is reverse.
General Instructions
1. Refer to Precautions first and carefully read and be sure to understand the information provided.
2. Familiarize yourself with this manual and understand the functions and performance of the Servo-
motor and Servo Driver for proper use.
3. The Servomotor and Servo Driver must be wired and operated by experts in electrical engineering.
4. We recommend that you add the following precautions to any instruction manuals you prepare for
the system into which the product is being installed.
S
Precautions on the dangers of high-voltage equipment.
S
Precautions on touching the terminals of the product even after power has been turned OFF.
(These terminals are live even with the power turned OFF.)
5. Do not perform withstand voltage or other megameter tests on the product. Doing so may damage
internal components.
6. Servomotors and Servo Drivers have a finite service life. Be sure to keep replacement products on
hand and to consider the operating environment and other conditions affecting the service life.
7. Do not set any parameter not described in this manual, otherwise the Servomotor or Servo Driver
may malfunction. Contact your OMRON representatives if you have any inquiry.
NOTICE
Before using the product under the following conditions, consult your OMRON representatives, make
sure that the ratings and performance characteristics of the product are good enough for the systems,
machines, or equipment, and be sure to provide the systems, machines, or equipment with double safety
mechanisms.
1. Conditions not described in the manual.
2. The application of the product to nuclear control systems, railroad systems, aviation systems, ve-
hicles, combustion systems, medical equipment, amusement machines, or safety equipment.
3. The application of the product to systems, machines, or equipment that may have a serious influence
on human life and property if they are used improperly.
Items to Check After Unpacking
Check the following items after removing the product from the package:
S
Has the correct product been delivered (i.e., the correct model number and specifications)?
S
Has the product been damaged in shipping?
The product is provided with Safety Precautions Sheets. No connectors or mounting screws are
provided.
Notice:
OMRON products are manufactured for use according to proper procedures by a qualified
operator and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual. Al-
ways heed the information provided with them. Failure to heed precautions can result in inju-
ry to people or damage to property.
!
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
!
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury, or property damage.
!
Caution
OMRON Product References
All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when
it refers to an OMRON product, regardless of whether or not it appears in the proper name
of the product.
The abbreviation “Ch,” which appears in some displays and on some OMRON products,
often means “word” and is abbreviated “Wd” in documentation in this sense.
The abbreviation “PC” means Programmable Controller and is not used as an abbreviation
for anything else.
Visual Aids
The following headings appear in the left column of the manual to help you locate different
types of information.
Note
Indicates information of particular interest for efficient and convenient operation of the product.
©
OMRON, 1998
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,
in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior
written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because
OMRON is constantly striving to improve its high-quality products, the information contained in this manual
is subject to change without notice. Every precaution has been taken in the preparation of this manual. Never-
theless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for dam-
ages resulting from the use of the information contained in this publication.
General Precautions
Observe the following precautions when using the OMNUC Position Drivers and peripheral
devices.
This manual may include illustrations of the product with protective covers removed in order
to describe the components of the product in detail. Make sure that these protective covers
are on the product before use.
Consult your OMRON representative when using the product after a long period of storage.
!
WARNING
!
WARNING
Do not touch the inside of the Servo Driver. Doing so may result in electric shock.
Always connect the frame ground terminals of the Servo Driver and the Servomotor
to a class-3 ground (to 100
Ω
or less). Not connecting to a class-3 ground may result
in electric shock.
Do not remove the front cover, terminal covers, cables, Parameter Units, or optional
items while the power is being supplied. Doing so may result in electric shock.
Operation, maintenance, or inspection must be performed by authorized personnel.
Not doing so may result in operation stoppage, burning of the product, electric
shock, or injury.
Wiring or inspection must be performed at least 1 minute after turning off the power
supply. Doing so may result in electric shock.
Do not damage, pull on, apply stress to, place heavy objects on, or pinch the cables.
Doing so may result in electric shock.
Do not touch the rotating parts of the Servomotor under operation. Doing so may
result in injury.
Do not modify the product. Doing so may result in injury or damage to the product.
Use the Servomotors and Servo Drivers in a specified combination. Not doing so
may result in fire or damage to the products.
Do not store or install the product in the following places. Doing so may result in elec-
tric shock, fire or damage to the product.
S
Locations subject to direct sunlight.
S
Locations subject to temperatures or humidity outside the range specified in the
specifications.
S
Locations subject to condensation as the result of severe changes in temperature.
S
Locations subject to corrosive or flammable gases.
S
Locations subject to dust (especially iron dust) or salts.
S
Locations subject to shock or vibration.
S
Locations subject to exposure to water, oil, or chemicals.
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
Caution
!
Caution
!
Caution
Do not touch the Servo Driver radiator, regenerative resistor, or Servomotor while
the power is being supplied or soon after the power is turned off. Doing so may result
in a skin burn due to the hot surface.
Storage and Transportation Precautions
!
Caution
Do not hold by the cables or motor shaft while transporting the product. Doing so
may result in injury or malfunction.
Do not place any load exceeding the figure indicated on the product. Doing so may
result in injury or malfunction.
Use the motor eye-bolts only for transporting the Servomotor. Using them for trans-
porting the machinery may result in injury or malfunction.
!
Caution
!
Caution
Installation and Wiring Precautions
!
Caution
!
Caution
Do not step on or place a heavy object on the product. Doing so may result in injury.
Do not cover the inlet or outlet ports and prevent any foreign objects from entering
the product. Doing so may result in fire.
Be sure to install the product in the correct direction. Not doing so may result in mal-
function.
Provide the specified clearances between the Servo Driver and the control panel or
with other devices. Not doing so may result in fire or malfunction.
Do not apply any strong impact. Doing so may result in malfunction.
Be sure to wire correctly and securely. Not doing so may result in motor runaway,
injury, or malfunction.
Be sure to firmly tighten the screws fixing the product, the terminal block, and cables.
Not doing so may result in malfunction.
Use crimp terminals for wiring. Do not connect bare stranded wires directly to the
terminal block. Doing so may result in fire.
Use the power supply voltages specified in this manual. Not doing so may result in
burning.
Take appropriate measures to ensure that the specified power with the rated voltage
is supplied. Be particularly careful in places where the power supply is unstable. Not
doing so may result in damage to the product.
Install external breakers and take other safety measures against short-circuiting in
external wiring. Not doing so may result in fire.
!
Caution
!
Caution
!
Caution
!
Caution
!
Caution
!
Caution
!
Caution
!
Caution
!
Caution
京公网安备 11010802033920号
EEWORLD
