4Gb: x4, x8, x16 DDR3L SDRAM
Description
DDR3L SDRAM
MT41K1G4 – 128 Meg x 4 x 8 banks
MT41K512M8 – 64 Meg x 8 x 8 banks
MT41K256M16 – 32 Meg x 16 x 8 banks
Description
DDR3L SDRAM (1.35V) is a low voltage version of the
DDR3 (1.5V) SDRAM. Refer to DDR3 (1.5V) SDRAM
(Die Rev :E) data sheet specifications when running in
1.5V compatible mode.
•
•
•
•
•
Self refresh temperature (SRT)
Automatic self refresh (ASR)
Write leveling
Multipurpose register
Output driver calibration
Features
• V
DD
= V
DDQ
= 1.35V (1.283–1.45V)
• Backward compatible to V
DD
= V
DDQ
= 1.5V ±0.075V
– Supports DDR3L devices to be backward com-
patible in 1.5V applications
• Differential bidirectional data strobe
• 8n-bit prefetch architecture
• Differential clock inputs (CK, CK#)
• 8 internal banks
• Nominal and dynamic on-die termination (ODT)
for data, strobe, and mask signals
• Programmable CAS (READ) latency (CL)
• Programmable posted CAS additive latency (AL)
• Programmable CAS (WRITE) latency (CWL)
• Fixed burst length (BL) of 8 and burst chop (BC) of 4
(via the mode register set [MRS])
• Selectable BC4 or BL8 on-the-fly (OTF)
• Self refresh mode
• T
C
of 105°C
– 64ms, 8192-cycle refresh up to 85°C
– 32ms, 8192-cycle refresh at >85°C to 95°C
– 16ms, 8192-cycle refresh at >95°C to 105°C
Options
• Configuration
– 1 Gig x 4
– 512 Meg x 8
– 256 Meg x 16
• FBGA package (Pb-free) – x4, x8
– 78-ball (9mm x 10.5mm) Rev. E
– 78-ball (7.5mm x 10.6mm) Rev. N
– 78-ball (8mm x 10.5mm) Rev. P
• FBGA package (Pb-free) – x16
– 96-ball (9mm x 14mm) Rev. E
– 96-ball (7.5mm x 13.5mm) Rev. N
– 96-ball (8mm x 14mm) Rev. P
• Timing – cycle time
– 938ps @ CL = 14 (DDR3-2133)
– 1.07ns @ CL = 13 (DDR3-1866)
– 1.25ns @ CL = 11 (DDR3-1600)
• Operating temperature
– Commercial (0°C T
C
+95°C)
– Industrial (–40°C T
C
+95°C)
– Automotive (–40°C T
C
+105°C)
• Revision
Marking
1G4
512M8
256M16
RH
RG
DA
HA
LY
TW
-093
-107
-125
None
IT
AT
:E/:N/:P
Table 1: Key Timing Parameters
Speed Grade
-093
1, 2
-107
1
-125
Notes:
Data Rate (MT/s)
2133
1866
1600
Target
t
RCD-
t
RP-CL
14-14-14
13-13-13
11-11-11
t
RCD
(ns)
t
RP
(ns)
CL (ns)
13.09
13.91
13.75
13.09
13.91
13.75
13.09
13.91
13.75
1. Backward compatible to 1600, CL = 11 (-125).
2. Backward compatible to 1866, CL = 13 (-107).
09005aef85af8fa8
4Gb_DDR3L.pdf - Rev. Q 12/17 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2017 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
4Gb: x4, x8, x16 DDR3L SDRAM
Description
Table 2: Addressing
Parameter
Configuration
Refresh count
Row address
Bank address
Column address
Page size
1 Gig x 4
128 Meg x 4 x 8 banks
8K
64K (A[15:0])
8 (BA[2:0])
2K (A[11, 9:0])
1KB
512 Meg x 8
64 Meg x 8 x 8 banks
8K
64K (A[15:0])
8 (BA[2:0])
1K (A[9:0])
1KB
256 Meg x 16
32 Meg x 16 x 8 banks
8K
32K (A[14:0])
8 (BA[2:0])
1K (A[9:0])
2KB
Figure 1: DDR3L Part Numbers
Note:
1. Not all options listed can be combined to define an offered product. Use the part catalog search on
http://www.micron.com for available offerings.
FBGA Part Marking Decoder
Due to space limitations, FBGA-packaged components have an abbreviated part marking that is different from the
part number. For a quick conversion of an FBGA code, see the FBGA Part Marking Decoder on Micron’s Web site:
http://www.micron.com.
09005aef85af8fa8
4Gb_DDR3L.pdf - Rev. Q 12/17 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2017 Micron Technology, Inc. All rights reserved.
4Gb: x4, x8, x16 DDR3L SDRAM
Description
Contents
State Diagram ................................................................................................................................................ 11
Functional Description ................................................................................................................................... 12
Industrial Temperature ............................................................................................................................... 12
Automotive Temperature ............................................................................................................................ 12
General Notes ............................................................................................................................................ 13
Functional Block Diagrams ............................................................................................................................. 14
Ball Assignments and Descriptions ................................................................................................................. 16
Package Dimensions ....................................................................................................................................... 22
Electrical Specifications .................................................................................................................................. 28
Absolute Ratings ......................................................................................................................................... 28
Input/Output Capacitance .......................................................................................................................... 29
Thermal Characteristics .................................................................................................................................. 30
Electrical Specifications – I
DD
Specifications and Conditions ............................................................................ 32
Electrical Characteristics – Operating I
DD
Specifications .................................................................................. 43
Electrical Specifications – DC and AC .............................................................................................................. 48
DC Operating Conditions ........................................................................................................................... 48
Input Operating Conditions ........................................................................................................................ 49
DDR3L 1.35V AC Overshoot/Undershoot Specification ................................................................................ 53
DDR3L 1.35V Slew Rate Definitions for Single-Ended Input Signals .............................................................. 56
DDR3L 1.35V Slew Rate Definitions for Differential Input Signals ................................................................. 58
ODT Characteristics ....................................................................................................................................... 59
1.35V ODT Resistors ................................................................................................................................... 60
ODT Sensitivity .......................................................................................................................................... 61
ODT Timing Definitions ............................................................................................................................. 61
Output Driver Impedance ............................................................................................................................... 65
34 Ohm Output Driver Impedance .............................................................................................................. 66
DDR3L 34 Ohm Driver ................................................................................................................................ 67
DDR3L 34 Ohm Output Driver Sensitivity .................................................................................................... 68
DDR3L Alternative 40 Ohm Driver ............................................................................................................... 69
DDR3L 40 Ohm Output Driver Sensitivity .................................................................................................... 69
Output Characteristics and Operating Conditions ............................................................................................ 71
Reference Output Load ............................................................................................................................... 74
Slew Rate Definitions for Single-Ended Output Signals ................................................................................. 74
Slew Rate Definitions for Differential Output Signals .................................................................................... 76
Speed Bin Tables ............................................................................................................................................ 77
Electrical Characteristics and AC Operating Conditions ................................................................................... 82
Command and Address Setup, Hold, and Derating .......................................................................................... 102
Data Setup, Hold, and Derating ...................................................................................................................... 109
Commands – Truth Tables ............................................................................................................................. 117
Commands ................................................................................................................................................... 120
DESELECT ................................................................................................................................................ 120
NO OPERATION ........................................................................................................................................ 120
ZQ CALIBRATION LONG ........................................................................................................................... 120
ZQ CALIBRATION SHORT .......................................................................................................................... 120
ACTIVATE ................................................................................................................................................. 120
READ ........................................................................................................................................................ 120
WRITE ...................................................................................................................................................... 121
PRECHARGE ............................................................................................................................................. 122
REFRESH .................................................................................................................................................. 122
SELF REFRESH .......................................................................................................................................... 123
09005aef85af8fa8
4Gb_DDR3L.pdf - Rev. Q 12/17 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2017 Micron Technology, Inc. All rights reserved.
4Gb: x4, x8, x16 DDR3L SDRAM
Description
DLL Disable Mode ..................................................................................................................................... 124
Input Clock Frequency Change ...................................................................................................................... 128
Write Leveling ............................................................................................................................................... 130
Write Leveling Procedure ........................................................................................................................... 132
Write Leveling Mode Exit Procedure ........................................................................................................... 134
Initialization ................................................................................................................................................. 135
Voltage Initialization / Change ....................................................................................................................... 137
V
DD
Voltage Switching ............................................................................................................................... 138
Mode Registers .............................................................................................................................................. 139
Mode Register 0 (MR0) ................................................................................................................................... 140
Burst Length ............................................................................................................................................. 140
Burst Type ................................................................................................................................................. 141
DLL RESET ................................................................................................................................................ 142
Write Recovery .......................................................................................................................................... 143
Precharge Power-Down (Precharge PD) ...................................................................................................... 143
CAS Latency (CL) ....................................................................................................................................... 143
Mode Register 1 (MR1) ................................................................................................................................... 145
DLL Enable/DLL Disable ........................................................................................................................... 145
Output Drive Strength ............................................................................................................................... 146
OUTPUT ENABLE/DISABLE ...................................................................................................................... 146
TDQS Enable ............................................................................................................................................. 146
On-Die Termination .................................................................................................................................. 147
WRITE LEVELING ..................................................................................................................................... 147
POSTED CAS ADDITIVE Latency ................................................................................................................ 147
Mode Register 2 (MR2) ................................................................................................................................... 148
CAS Write Latency (CWL) ........................................................................................................................... 149
AUTO SELF REFRESH (ASR) ....................................................................................................................... 149
SELF REFRESH TEMPERATURE (SRT) ........................................................................................................ 149
SRT vs. ASR ............................................................................................................................................... 150
DYNAMIC ODT ......................................................................................................................................... 150
Mode Register 3 (MR3) ................................................................................................................................... 150
MULTIPURPOSE REGISTER (MPR) ............................................................................................................ 151
MPR Functional Description ...................................................................................................................... 152
MPR Register Address Definitions and Bursting Order ................................................................................. 153
MPR Read Predefined Pattern .................................................................................................................... 158
MODE REGISTER SET (MRS) Command ........................................................................................................ 158
ZQ CALIBRATION Operation ......................................................................................................................... 159
ACTIVATE Operation ..................................................................................................................................... 160
READ Operation ............................................................................................................................................ 162
WRITE Operation .......................................................................................................................................... 173
DQ Input Timing ....................................................................................................................................... 181
PRECHARGE Operation ................................................................................................................................. 183
SELF REFRESH Operation .............................................................................................................................. 183
Extended Temperature Usage ........................................................................................................................ 185
Power-Down Mode ........................................................................................................................................ 186
RESET Operation ........................................................................................................................................... 194
On-Die Termination (ODT) ............................................................................................................................ 196
Functional Representation of ODT ............................................................................................................. 196
Nominal ODT ............................................................................................................................................ 196
Dynamic ODT ............................................................................................................................................... 198
Dynamic ODT Special Use Case ................................................................................................................. 198
Functional Description .............................................................................................................................. 198
09005aef85af8fa8
4Gb_DDR3L.pdf - Rev. Q 12/17 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2017 Micron Technology, Inc. All rights reserved.
4Gb: x4, x8, x16 DDR3L SDRAM
Description
Synchronous ODT Mode ................................................................................................................................ 204
ODT Latency and Posted ODT .................................................................................................................... 204
Timing Parameters .................................................................................................................................... 204
ODT Off During READs .............................................................................................................................. 207
Asynchronous ODT Mode .............................................................................................................................. 209
Synchronous to Asynchronous ODT Mode Transition (Power-Down Entry) .................................................. 211
Asynchronous to Synchronous ODT Mode Transition (Power-Down Exit) ........................................................ 213
Asynchronous to Synchronous ODT Mode Transition (Short CKE Pulse) ...................................................... 215
09005aef85af8fa8
4Gb_DDR3L.pdf - Rev. Q 12/17 EN
5
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2017 Micron Technology, Inc. All rights reserved.
京公网安备 11010802033920号
EEWORLD
