Hybrid
Conductive Polymer Hybrid Aluminum
Electrolytic Capacitors
Surface Mount Type
High temperature lead-free reflow
ZKU
series
Features
●
Endurance : 4000 h at 125
℃
(High temperature / Long life)
●
Large capacitance compared with ZK series
●
Low ESR
●
Characteristics dependencies in frequency and low temperature are as small as polymer type
●
Vibration-proof product is available upon request.（ø6.3, ø8, ø10）
●
AEC-Q200 compliant
●
RoHS compliant
Specifications
Size code
Category temp. range
Rated voltage range
Nominal cap.range
Capacitance tolerance
Leakage current
Dissipation factor (tan δ)
Surge voltage (V)
C
D
D8
–55
℃
to +125
℃
25 V to 35 V
120 μF to 180 μF
±20 % (120 Hz / +20
℃)
F
G
39 μF to 56 μF
68 μF to 100 μF
220 μF to 330 μF
390 μF to 560 μF
Endurance
Shelf life
Damp heat (Load)
Please see the attached characteristics list
Rated voltage × 1.25 (15
℃
to 35
℃)
+125
℃
± 2
℃ 4000
h, apply the rated ripple current without exceeding the rated voltage.
Capacitance change
Within ±30% of the initial value
Dissipation factor (tan δ)
≦
200 % of the initial limit
ESR
≦
200 % of the initial limit
Leakage current
Within the initial limit
Size code
ESR after endurance
C
D
D8
F
(Ω / 100 kHz)(-40
℃）
2.0
1.4
0.8
0.4
After storage for 1000 hours at +125
℃
± 2
℃
with no voltage applied and then being
stabilized at +20
℃,
capacitors shall meet the limits specified in endurance.
(With voltage treatment)
+85
℃
± 2
℃,
85 % to 90 %RH, 2000 h, rated voltage applied
Capacitance change
Within ±30% of the initial value
Dissipation factor (tan δ)
≦
200 % of the initial limit
ESR
≦
200 % of the initial limit
Leakage current
Within the initial limit
I
≦
0.01 CV (μA), 2 minutes after reaching rated voltage, 20
℃
*CV = (Capacitance in μF) x (Rated voltage in V)
G
0.3
Marking
Example : 25 V 56 μF
Marking color : BLACK
Negative polarity marking (–)
Capacitance (μF)
Series identification
Dimensions (not to scale)
[Standard]
øD±0.5
K
(I)
0.3 max.
B±0.2
A±0.2
Size
code
Unit：½½
L
Pressure relief (ø10
≦)
W
( ) Reference size
øD±0.5
øD±0.5
B±0.2
B±0.2
(S)
R
(P)
(S)
H
Rated voltage code
Lot number
L
W
Supportive terminals
(I)
T
L
Pressure relief (ø10
≦)
W
Supportive terminals
( ) Reference size
( ) Reference size
Unit：½½
R. voltage code
E
V
Unit：V
25
35
Size code
D
D8
F
G
øD
6.3
6.3
8.0
10.0
L
6.1±0.3
8.0±0.3
10.5±0.3
10.5±0.3
A, B
6.6
6.6
8.3
10.3
H
max.
7.8
7.8
10.0
12.0
F
0 to +0.15
0 to +0.15
0 to +0.15
0 to +0.15
I
2.4
2.4
3.4
3.5
W
0.65±0.1
0.65±0.1
1.2±0.2
1.2±0.2
P
2.2
2.2
3.1
4.6
+0.15
0.35
-0.20
+0.15
0.35
-0.20
0.70±0.2
0.70±0.2
K
R
1.1±0.2
1.1±0.2
0.70±0.2
0.70±0.2
S
3.3
3.3
5.3
6.9
(I)
T
R
(P)
56
E ZK
[Vibration-proof product]
< Size code：D, D8 >
F
A±0.2
K
C
D
D8
F
G
øD
5.0
6.3
6.3
8.0
10.0
L
5.8±0.3
5.8±0.3
7.7±0.3
10.2±0.3
10.2±0.3
A, B
5.3
6.6
6.6
8.3
10.3
H
max.
6.5
7.8
7.8
10
12.0
I
2.2
2.6
2.6
3.4
3.5
W
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
P
1.5
1.8
1.8
3.1
4.6
+0.15
0.35
-0.20
+0.15
0.35
-0.20
+0.15
0.35
-0.20
0.70±0.2
0.70±0.2
K
(I)
(P)
H
< Size code：F,
G >
(I)
F
H
(I)
K
A±0.2
T
1.05±0.2
1.05±0.2
1.3±0.2
1.3±0.2
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01-Apr-22
ZKU series
Characteristics list
Endurance : 125
℃
4000 h
Case size
(mm)
Rated
voltage
(V)
Capacitance
Specification
Size
code
Vibration
-proof
Part number
Min.packaging
q'ty (pcs)
(±20 %)
(μF)
L
øD
Standard
Ripple
current
*1
(mA rms)
ESR
*2
(mΩ)
tan δ
*3
Standard
product
Vibration-proof
product
Taping
56
100
25
180
330
560
39
68
35
120
220
390
5
6.3
6.3
8
10
5
6.3
6.3
8
10
5.8
5.8
7.7
10.2
10.2
5.8
5.8
7.7
10.2
10.2
-
6.1
8.0
10.5
10.5
-
6.1
8.0
10.5
10.5
C
D
D8
F
G
C
D
D8
F
G
850
1300
1800
2000
2800
750
1200
1700
2000
2800
80
50
30
27
20
100
60
35
27
20
0.14
0.14
0.14
0.14
0.14
0.12
0.12
0.12
0.12
0.12
EEHZK1E560UR
EEHZK1E101UP
EEHZKE181XUP
EEHZK1E331UP
EEHZK1E561UP
EEHZK1V390UR
EEHZK1V680UP
EEHZKV121XUP
EEHZK1V221UP
EEHZK1V391UP
-
EEHZK1E101UV
EEHZKE181XUV
EEHZK1E331UV
EEHZK1E561UV
-
EEHZK1V680UV
EEHZKV121XUV
EEHZK1V221UV
EEHZK1V391UV
1000
1000
900
500
500
1000
1000
900
500
500
*1: Ripple current (100 kHz / +125
℃)
*2: ESR (100 kHz / +20
℃)
*3: tan δ (120 Hz / +20
℃)
◆
Please refer to the page of “Reflow profile” and “The taping dimensions”.
◆
The dimensions of the vibration-proof products, please refer to the page of the mounting specification.
Frequency correction factor for ripple current
Rated capacitance (C)
C < 47 μF
47 μF
≦
C < 100 μF
100 μF
≦
C
Rated capacitance (C)
C < 47 μF
47 μF
≦
C < 100 μF
100 μF
≦
C
Rated capacitance (C)
C < 47 μF
47 μF
≦
C < 100 μF
100 μF
≦
C
Rated capacitance (C)
C < 47 μF
47 μF
≦
C < 100 μF
100 μF
≦
C
Frequency(f)
Correction
factor
Frequency(f)
Correction
factor
Frequency(f)
Correction
factor
Frequency(f)
Correction
factor
100 Hz
≦
f < 200 Hz
0.15
0.15
0.15
1 kHz
≦
f < 2 kHz
0.45
0.50
0.50
10 kHz
≦
f < 15 kHz
0.70
0.75
0.75
40 kHz
≦
f < 50 kHz
0.80
0.85
0.85
200 Hz
≦
f < 300 Hz
0.20
0.25
0.25
2 kHz
≦
f < 3 kHz
0.55
0.60
0.60
15 kHz
≦
f < 20 kHz
0.75
0.75
0.80
50 kHz
≦
f < 100 kHz
0.85
0.90
0.90
300 Hz
≦
f < 500 Hz
0.25
0.30
0.30
3 kHz
≦
f < 5 kHz
0.60
0.65
0.65
20 kHz
≦
f < 30 kHz
0.75
0.80
0.85
100 kHz
≦
f < 500 kHz
1.00
1.00
1.00
500 Hz
≦
f < 1 kHz
0.35
0.40
0.40
5 kHz
≦
f < 10 kHz
0.65
0.70
0.70
30 kHz
≦
f < 40 kHz
0.75
0.80
0.85
500 kHz
≦
f
1.05
1.00
1.00
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01-Apr-22
Guidelines and precautions regarding the
technical information and use of our products
described in this online catalog.
■
If you want to use our products described in this online catalog for applications requiring special
qualities or reliability, or for applications where the failure or malfunction of the products may directly
jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment,
traffic and transportation equipment, combustion equipment, medical equipment, accident prevention,
anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of
our products fit to such applications. Please ensure that you will ask and check with our inquiry desk
as to whether the specifications of our products fit to such applications use before you use our products.
■
The quality and performance of our products as described in this online catalog only apply to our
products when used in isolation. Therefore, please ensure you evaluate and verify our products under
the specific circumstances in which our products are assembled in your own products and in which our
products will actually be used.
■
Please ensure the safety by means of protection circuit, redundant circuit etc. in your system design
in order to prevent the occurrence of life crisis and other serious damages due to the failure of our
products.
■
The products and product specifications described in this online catalog are subject to change for
improvement without prior notice. Therefore, please be sure to request and confirm the latest product
specifications which explain the specifications of our products in detail, before you finalize the design
of your applications, purchase, or use our products.
■
The technical information in this online catalog provides examples of our products' typical operations
and application circuits. We do not guarantee the non-infringement of third party's intellectual property
rights and we do not grant any license, right, or interest in our intellectual property.
■
If any of our products, product specifications and/or technical information in this catalog is to be exported,
the laws and regulations of the exporting country, especially with regard to security and export control,
shall be observed.
<Regarding the Certificate of Compliance with
the EU RoHS Directive/REACH Regulations>
■
The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending
on the part number or series of our products.
■
When you use the inventory of our products for which it is unclear whether those products are
compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website
inquiry form and contact us.
Please note that we do not owe any liability and responsibility if our products are used beyond
the description of this catalog or without complying with precautions in this catalog.
10-Feb-23
Notices / Items to be observed
Notices
■
Applicable laws and regulations
・
This product complies with the RoHS Directive (Restriction of the use of certain hazardous substances in electrical and
electronic equipment (DIRECTIVE 2011/65/EU and（EU)2015/863)).
・
No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing
this product. We do not use PBBs or PBDEs as brominated flame retardants.
・
Follow export procedures in accordance with the Foreign Exchange and Foreign Trade Law and other export-related laws and
regulations when exporting this product.
・
These products are not dangerous goods on the transportation as identified by UN(United Nations) numbers or UN
classification.
・
This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances,
computers and other office equipment, optical equipment, measuring equipment.
・
An advanced specification must be signed individually for high-reliability use that might threaten human life or
property due to a malfunction of the capacitor.
・
The technical information in this specification provides examples of our products' typical operations and application
circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant
any license, right, or interest in our intellectual property.
■
Limited applications
■
Intellectual property rights and licenses
Items to be observed
■
For specification
・
This specification guarantees the quality and performance of the product as individual components.
The durability differs depending on the environment and the conditions of usage.
Before use, check and evaluate their compatibility with actual conditions when installed in the products.
When safety requirements cannot be satisfied in your technical examination, inform us immediately.
・
Do not use the products beyond the specifications described in this document.
If a malfunction of this product may result in the loss of human life or other serious damage, in traffic transportation equipment
(trains, automobiles, traffic signals, etc.), medical equipment, aerospace equipment, electric heating equipment, combustion and
gas equipment, rotating equipment, disaster prevention and security equipment, etc., ensure safety by giving sufficient consideration
to a fail-safe design, for example, by considering the following items.
(1) The system is equipped with a protection circuit and protection device.
(2) The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event
of a single fault.
・
Before using the products, carefully check the effects on their quality and performance, and determined whether or not they
can be used. These products are designed and manufactured for general-purpose and standard use in general electronic
equipment. These products are not intended for use in the following special conditions.
(1) In liquid, such as Water, Oil, Chemicals, or Organic solvent.
(2) In direct sunlight, outdoors, or in dust.
(3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a high
concentration corrosive gas, such as Cl
2
, H
2
S, NH
3
, SO
2
, or NOx.
(4) In an environment where strong static electricity or electromagnetic waves exist.
(5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these products.
(6) Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin and
other material.
(7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular, when using water or
a water-soluble cleaning agent, be careful not to leave water residues)
(8) Using in the atmosphere where strays acid or alkaline.
(9) Using in the atmosphere where there are excessive vibration and shock.
(10) Using in the atmosphere where there are low pressure or decompression.
・
Please arrange circuit design for preventing impulse or transitional voltage.
Ensure that the voltage is lower than the rated voltage in the following condition: shock voltage circuits, transient phenomena in
which excessive high voltage is applied in a short period of time, or when pulse high voltage is applied.
・
Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid deterioration of
characteristics and functions of each product. Electrolyte leakage damages printed circuit and affects performance,
characteristics, and functions of customer system.
■
Upon application to products where safety is regarded as important
■
Conditions of use
10-Feb-23
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Application
Guidelines
(Hybrid)
1. Circuit design
1.1 Operating temperature and frequency
Electrical characteristics of the capacitor are likely to change due to variation in temperature and/or frequency.
Circuit designers should take these changes into consideration.
(1) Effects of operating temperature on electrical parameters
At higher temperatures
: Leakage current increases
: Hybrid type has smaller capacitance and larger tan δ.
At lower temperatures
Other aluminum electrolytic capacitors have smaller capacitance, larger tan δ,
and larger impedance as well as equivalent series resistance (ESR).
(2) Effects of frequency on electrical parameters
At higher frequency capacitance and impedance decrease while tanδ increases.
At lower frequency, heat generated by ripple current will rise due to an increase in equivalent series
resistance (ESR).
(1) Expected life is affected by operating temperature. Generally, each 10 °C reduction in temperature will double the
expected life. Use capacitors at the lowest possible temperature below the upper category temperature.
(2) If operating temperatures exceed the upper category limit, rapid deterioration of electrical parameter
will occur and irreversible damage will result.
Measure not only the ambient temperature but also the surface temperature of the capacitor’s case top,
which has effects of ripple current and radiated heat from power transistors, IC's, and/or resistors.
Avoid placing components, which could conduct heat to the capacitor from the back side of the circuit board.
(3) The formula for calculating expected life is as follows ;
1.2 Operating temperature and life expectancy
L
2
= L
1
×2
L
1
L
2
T
1
T
2
T
1-
(T
2
+⊿T
)
10
where T
1
≧
T
2
: Guaranteed life (h) at temperature, T
1
(℃)
: Expected life (h) at temperature, T
2
(℃)
: Upper category temperature (℃) *Hybrid type : + temperature rise due to rated ripple current (℃)
: Capacitor's ambient temperature (℃)
⊿T
: Temperature rise due to ripple current (°C)
(4) Using the capacitor beyond the rated lifetime will result in short circuit, electrolyte leak, vent open, and large
deterioration
of characteristics. The lifetime cannot exceed 15 years due to aging of sealing rubber.
(5) If the capacitor is used in a high temperature condition for a long time, micro cracks may appear on the surface
of sealing rubber, and/or capacitor case exterior may become brownish in color, but the product reliability will not
be influenced.
1.3 Load conditions to avoid
The following load conditions will cause rapid deterioration of capacitor’s electrical characteristics.
In addition, instantaneous heating and gas generation within the capacitor may cause an operation of pressure
relief vent, and that results in electrolyte leaks, explosion and/or fire ignition.
The leaked electrolyte is combustible and electrically conductive.
(1) Reverse voltage
DC capacitors have polarity. Therefore, do not apply the reverse voltage. Find the correct polarity before insertion.
(2) Charge / Discharge applications
General purpose capacitors are not suitable for use in repeating charge/discharge applications. For such applications,
consult a sales representative with actual application condition. Rush current must not exceed 100 A.
(3) ON-OFF circuit
When using capacitors in circuit where ON-OFF switching is repeated more than 10,000 times a day, consult a sales
representative with actual application condition for an appropriate choice of capacitors.
(4) Over voltage
Do not apply a voltage exceeding the rated voltage. The rated surge voltage can be applied only for a short time.
Make sure that a sum of the DC voltage and the superimposed AC ripple voltage does not exceed the rated voltage.
(5) Ripple current
Do not apply ripple currents exceeding the rated value.
Make sure that rated ripple currents superimposed on low DC bias voltages do not cause reverse voltage conditions.
Even if the current is below the rated ripple current, using the capacitor for longer than the rated lifetime will cause
ESR increase and internal generation of heat, which may eventually lead to vent open, bulging of case/rubber,
electrolyte leak, short circuit, explosion, or ignition in the worst case.
10-Feb-23
Buy&Sell
京公网安备 11010802033920号
EEWORLD
