Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated)
EE-SX91
CSM_EE-SX91_DS_E_7_2
Meeting Customer Needs with Compact
Sensors that Mount with M3 Screws
• Both light-ON and dark-ON outputs provided.
• A compact size and choice of five models for a wide
range of applications.
• Compact NPN and PNP output models.
• Safer operation with built-in power supply reverse polarity protection.
• Output overcurrent protection with a thermal shutdown circuit (patent
pending).
*
• Mount using M3 or M2 screws.
• Indicator is visible in many directions for installation
in any location.
• Flexible robot cables are standard on all models.
* Output overcurrent protection is provided only on output 2 (OUT2) on NPN models.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Be sure to read
Safety Precautions
on
page 6.
Features
A Compact Size and Choice of Five Models
for a Wide Range of Applications
Select any of five models to minimize the space required.
Flexible Robot Cables: Standard on All Models
Robot Cables are effective for moving parts, and are provided as
standard equipment with all models.
Both Light-ON and Dark-ON Outputs
Both light-ON and dark-ON outputs are provided on all models,
allowing outputs to be switched by simply changing the wiring
according to the application.
Indicator Visible from Many Directions for
Installation in Any Location
Compact NPN and PNP Output Models
Both NPN and PNP output models are available for use according to
system requirements.
The light indicator can be checked from up to four directions.
Safer Operation with Built-in Power Supply
Reverse Polarity Protection
The built-in power supply reverse polarity protection protects against
reverse connection of the power supply or outputs for safer operation
at the assembly site.
NPN
Light indicator
(orange)
Mount Using M3 or M2 Screws
Vcc
Load 1
Main
circuit
OUT1
Load 2
(Control
output)
OUT2
5 to
(Control output) 24 VDC
GND (0 V)
The EE-SX91 can be mounted using M3 or M2 screws, so it can
easily replace an existing compact sensor mounted with M2 screws.
Reverse polarity protection
1
EE-SX91
Ratings and Specifications
Type
NPN
models
Item
PNP
models
Standard
L-shaped
EE-SX911-R
EE-SX911P-R
F-shaped
EE-SX912-R
EE-SX912P-R
R-shaped
EE-SX913-R
EE-SX913P-R
U-shaped
EE-SX914-R
EE-SX914P-R
Pre-wired models EE-SX910-R
Pre-wired models EE-SX910P-R
5 mm (slot width)
Sensing distance
Sensing object
Differential distance
Light source
Indicator
Supply voltage
Current consumption
Opaque: 1.2
×
0.8 mm min.
0.025 mm max.
*1
GaAs infrared LED with a peak wavelength of 940 nm
Light indicator (orange LED)
5 to 24
VDC
±10%,
ripple (p-p): 10% max.
21 mA max.
Load power supply voltage: 5 to 24
VDC
Load current: 50 mA max.
OFF current: 0.5 mA max.
50 mA load current with a residual voltage of 1.0
V
max.
5 mA load current with a residual voltage of 0.4
V
max.
Power supply reverse polarity protection; output reverse polarity protection
(only OUT2 on models with NPN output)
1 kHz min. (3 kHz average)
*2
1,000 lx max. with fluorescent light on the surface of the receiver
Operating:
−25
to 55°C
Storage:
−30
to 80°C (with no icing or condensation)
Operating: 5% to 85%
Storage:
5% to 95% (with no icing or condensation)
10 to 2,000 Hz (peak acceleration: 150m/s
2
)
0.75-mm single amplitude for 2.5 h (15-min periods, 10 cycles) each in X, Y, and Z directions
500 m/s
2
for 3 times each in X, Y, and Z directions
IEC60529 IP50
Pre-wired Models (standard cable length: 1 m)
Control output
Protection circuits
Response frequency
Ambient illumination
Ambient temperature range
Ambient humidity range
Vibration resistance (Destruction)
Shock resistance (Destruction)
Degree of protection
Connecting method
Weight
(packed state)
Pre-wired Models
Approx. 17 g
Polybutylene phthalate (PBT)
Polycarbonate (PC)
Mate- Case/cover
rials Emitter/receiver
*1. The differential distance is the value when a sensing object is moved in a lateral direction to the slot.
*2. The response frequency was measured by detecting the following rotating disk.
Disk
1 mm
2.1 mm
t = 0.2 mm
1 mm
3
EE-SX91
Engineering Data (Reference Value)
Sensing Position Characteristics
EE-SX910
EE-SX910
EE-SX911
Dark-ON
d
Insertion
direction
Dark-ON
Dark-ON
Insertion
direction
d
d
Insertion direction
Light-ON
0
1
2
3
4
5
6
Distance d (mm)
Light-ON
0
1
2
3
4
5
6
Distance d (mm)
Light-ON
0
1
2
3
4
5
6
Distance d (mm)
Repeated Sensing Position Characteristics
EE-SX910
Dark-ON
d=±0.002
d
Light-ON
3.14
3.16
3.18
3.2
Distance d (mm)
Vcc = 24 V, No. of repetitions: 20, Ta = 25°C
(Differential distance = 0.025 mm max.)
Note: The data applies to dark status. Operation may be affected by external light
interference or light coming through the sensing object.
4
京公网安备 11010802033920号
EEWORLD
