This range of Power Wirewound Resistors are wound on continuous glass fibre elements
or have a ceramic core depending on resistance value. The element is housed in a
ceramic case and sealed with an inorganic silica filler. Their construction gives a resistor
with high insulation resistance and low surface temperature, capable of withstanding high
overload currents. These resistors are ideally suited to a variety of applications within
industrial and commercial environments, where performance and reliability are of prime
importance. Applications include fan force ovens, cooker hoods, power supplies and triac
based speed controls. Custom Design Variants in value and style are welcomed.
Characteristics - Electrical
Resistance Values:
Resistance Tolerance:
Maximum Continuous Voltage:
Load Life:
Power Rating:
Series E24 5% E12 10% (see tables for value
limits per style)
±5% ±10%
√P x R
ΔR <±3% 1000 hours at 70°C
See Surface Temperature Curve (below)
Characteristics - Environmental and Mechanical
Temperature Coefficient of Resistance:
Resistance to Solder Heat:
Voltage Coefficient of Resistance:
Operating Temperature Range:
Load Stability:
Long Term Damp Heat:
Shelf Life:
Insulation Resistance:
Dielectric Strength:
Lead Material:
Marking:
200ppm/°C (400ppm/°C below 18R)
ΔR < 0.2% (350°C for 2.5 seconds)
Negligible
-55°C to +350°C
ΔR < 5% (full load at 70°C for 1000 hours)
ΔR < 0.2% (21 days at 40°C for 93% humidity)
ΔR < 1.0% (per 12 months)
> 10000M
2000V RMS
Steel - Solder coat
Legend mark, Manufacturer name, type, ohmic value
and tolerance.
Surface Temperature Rise Curve
SCBH2
SBCH4/5
SBCH6/7
SBCH15
SBCH11
SBCH8
Derating Curve
250
Surface Temperature
200
% of Power
18
150
100
50
0
0
2
4
6
8 10 12
Power in Watts
14
16
NB - SBC Series will
run 15°C hotter than
described here
125
100
80
60
40
20
0
25
75
125
175
225
275
Ambient Temperature
325
375
1773278 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
High Power Resistor
Type SBC (Square Ceramic) Series
Type SBC - SBCH (Axial Power Resistor)
We offer three ceramic profiles for the main wattage sizes.
These are for additional heat dissipation and vertical mounting of resistors.
The suffix for each style is as follows:-
SBC Standard
SBCH 4/5/6/7
SBCH 8/11/15
Type SBCHE (For Vertical Mounting)
We offer SBCHE Styles with one lengthened lead for vertical mounting. See additional hardware on last page.
One Lead Length 20mm longer than case length. Supplied with one longer lead wrapped back in flute in ceramic.
Type SBC - (No Flutes in Ceramic)
Model
SBC-2
SBC-4
SBC-6
SBC-8
SBC-11
SBC-15
Power
Max
4W
5W
7W
9W
11 W
17 W
Ohmic Values
Min Max
R20
R30
R47
1R0
1R0
1R0
6K8
10K
22K
8K2
22K
22K
Dimensions
A
B
L
6.4
6.4
6.4
9
9
9
6.4
6.4
6.4
9
9
9
20
25
38
38
50
75
Weight
Grams
2.3
2.9
4.2
7.4
10.8
15.3
Type SBCH - (Flutes in Ceramic)
Model
SBCH-4
SBCH-5
SBCH-6
SBCH-7
SBCH-8
Power Ohmic Values
Max
Min Max
4W
5W
7W
7W
9W
R20
R30
R47
R33
1R0
1R0
1R0
6K8
10K
22K
10K
8K2
22K
22K
Dimensions
A
B
L
7
7
7
9
9
9
9
8
8
8
10
10
10
10
20
25
38
25
38
50
75
Weight
Grams
2.2
3.5
5.0
6.0
8.0
10.0
15.0
SBCH-11
11 W
SBCH-15
17 W
SBCH - 4, 5, 6
SBCH - 7, 8, 11, 15
L = Length of Ceramic Section
Type SBCLF - (Externally Fused Style)
Model
SBCLF-4
SBCLF-5
SBCLF-7
SBCLF-10
Power
Max
4W
5.5 W
7W
10 W
Ohmic Values Dimensions
Min Max
A
B
L
2R2
2R2
3R3
4R7
2K2
5K6
8K2
12K
10
10
10
10
9
9
9
9
25
38
50
75
Solder for fuse is SnPb 60:40
1773278 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
High Power Resistor
Type SBC (Square Ceramic) Series
Type SBCV - (Vertical Mount Style)
Model
SBCV-6
SBCV-8
Power Ohmic Values
Max
Min Max
7W
9W
R47
1R0
1R0
1R0
22K
8K2
22K
22K
Dimensions
A
B
L
9
9
9
9
10
10
10
10
25
38
50
75
SBCV-11
11 W
SBCV-15
17 W
Lead drawn through hole in ceramic
Accessories
This device is used with models SBCV.
Order LC1 Support.
These can be used with SBCH/SBCV models.
Order BCV Support Pillar.
How to Order
SBCH
Common Part
SBCH - Axial
SBCV - Vertical
SBCLF - Vertical Fusible
SBCHE - Axial / Vertical
One Long Lead
1 Ohm
(1000 milli Ohms) 1R0
1K Ohm
(1000 Ohms) 1K0
6
Size
1K0
Resistance Value
0.2 Ohm
(200 milli Ohms) R20
J
Tolerance
J - ±5%
K - ±10%
See Relevant Table
N.B. All resistors are supplied with arklone proof seal
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Except XPD_DCDC, all other GPIOs can be configured as high level.
The default level state of GPIO after power-on is: except for 6 SDIO+GPIO4+GPIO5+GPIO16, the remaining GPIOs have built-in pull-up res...
Agilent's 4G Technology Test Seminar will be held at Beijing Parkview Hotel on January 21, 2014! [/color]{:soso_e200:}[/align][align=left][b][url=http://www.tm.agilent.com.cn/tmo/Events/20140109/index...
I want to write an Ethernet to USB driver to forward the data received from Ethernet to the host computer via USB. I have implemented the query method to receive data from Ethernet and then forward it...
Dear brothers: Is there anyone who has done XPE or has colleagues or classmates who have done this? I have a question now: I set write protection under XPE, and the system lost files after using it fo...
[font=楷体_GB2312][size=3]We often see a lot of very classic operational amplifier application atlases, but they are all based on dual power supplies. Many times, circuit designers must use a single pow...
---------------------------
错误
---------------------------
SQL Server CE Server Tools is compatible only with SQL Server 2000 Service Pack 1 and higher. When you install SQL Server CE Server Tools on ...
From being a global leader to losing the market, Korean battery manufacturers have always wanted to regain the lost market and dignity, but facing Chinese battery manufacturers represented by CAT...[Details]
On August 24th, Jin Yuzhi, CEO of Huawei's Intelligent Automotive Solutions BU, announced the first automotive application of Huawei Qiankun's unique Limera technology. This technology eliminates t...[Details]
Flip-chip and ball grid array (BGA) are two widely used packaging technologies in the electronics industry. Each has its own advantages and limitations, and in some cases, they can complement each ...[Details]
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
Long ago, the lifespan of cars in my country was 15 years. Once a car reached 15 years old, it was forced to be scrapped. However, the policy was later changed. As long as the car does not exceed 6...[Details]
In recent years, the government has increasingly supported electric vehicles, and the number of electric vehicles has increased. Observant drivers will notice that there are many more green license...[Details]
On August 25th, SK Hynix announced that it has completed development and entered mass production of its 321-layer, 2Tb QLC NAND flash memory product. This achievement marks the world's first applic...[Details]
1. Introduction
Electronic scales are gradually replacing traditional measuring tools like springs and balances in everyday life, such as electronic price computing scales and electronic weigh...[Details]
According to foreign media reports, BMW has just been granted a patent for a screen that could cover the entire roof. BMW hopes to transform at least a portion of the vehicle's headliner into a dis...[Details]
Based on a survey of more than ten intelligent robot companies, this article sorts out and analyzes the current development status of the intelligent industry and the challenges and differences it ...[Details]
On August 22, the National Energy Administration released the latest data, showing that by the end of July 2025, China's total number of electric vehicle charging infrastructure will reach 16.696 m...[Details]
As AI accelerates across industries, the demand for data center infrastructure is also growing rapidly.
Keysight Technologies, in collaboration with Heavy Reading, released the "Beyo...[Details]
A multilevel inverter converts a DC signal into a multilevel staircase waveform. Instead of a straight positive-negative output waveform, the output waveform of a multilevel inverter alternates in ...[Details]
According to Nikkei, Japan has performed poorly in responding to China's power semiconductor challenges.
There are five major companies in Japan's power chip market: Mitsubishi Electric,...[Details]
Teletrac Navman has launched the Multi IQ dashcam, a cloud-based solution designed for large commercial vehicle operators. It connects up to five cameras to cover the vehicle's interior, sides, and...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
