SPECIFICATION CONTROL DRAWING
TITLE
Date
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
11-22-06
MEDIUM WEIGHT, GENERAL PURPOSE, 600 VOLT
This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC.
55PC0216
Revision
E
CONDUCTOR -
NICKEL-COATED HIGH STRENGTH
COPPER ALLOY
INSULATION -
RADIATION-CROSSLINKED,
MODIFIED ETFE
CONSTRUCTION DETAILS
CONDUCTOR DIAMETER
( in.)
PART NUMBER
1/
55PC0216-26-*
55PC0216-24-*
55PC0216-22-*
55PC0216-20-*
55PC0216-18-*
55PC0216-16-*
WIRE
SIZE
(AWG)
26
24
22
20
18
16
CONDUCTOR
STRANDING
(number x AWG)
19
19
19
19
19
19
x
x
x
x
x
x
38
36
34
32
30
29
LOWER
SPEC
LIMIT
.0175
.0225
.0285
.0365
.0452
.0514
TARGET
VALUE
.0183
.0233
.0293
.0375
.0464
.0527
UPPER
SPEC
LIMIT
.0191
.0241
.0301
.0385
.0476
.0538
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
LOWER SPEC
(ohms/1000 ft.)
LIMIT
49.4
30.1
18.6
11.4
7.1
5.5
.0328
.0378
.0438
.0523
.0616
.0690
DIAMETER
( in.)
TARGET
VALUE
.0345
.0395
.0455
.0540
.0635
.0710
UPPER SPEC
LIMIT
.0362
.0412
.0472
.0557
.0654
.0730
WEIGHT
( lbs/1000 ft. )
TARGET
VALUE
1.38
1.98
2.90
4.38
6.59
8.37
UPPER SPEC
LIMIT
1.52
2.13
3.06
4.57
6.90
8.70
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION AND TENSILE STRENGTH:
Total Insulation,
Elongation, 50% (minimum)
Tensile Strength, 5000 lbf/in² (minimum)
INSULATION FLAWS:
Spark Test: 3.0 kV (rms)
Impulse Dielectric Test: 8.0 kV (peak)
INSULATION THICKNESS: .008 in. (nominal) total insulation
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in.(maximum) in 12 in.
VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms)
PART NUMBER:
The "*" in the part numbers above shall be replaced by color code designators.
1/ Example: AWG 22, white: 55PC0216-22-9
AWG 22, white with black stripe: 55PC0216-22-90
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
R
Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
Page 1 of 1
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2006 Tyco Electronics Corporation. All rights reserved.
京公网安备 11010802033920号
EEWORLD
