Dynamic response generally refers to the response of the output of a control system from the initial state to the final state under the action of a typical input signal. When a unit step input x(t) is...
A four-story building with two elevators: Elevator 1 and Elevator 2Requirements: 1. When a person on a certain floor presses the "Call" command, the elevator closer to him arrives;2. If the two elevat...
Dear experts, I used to work on the 51 series, but recently I took on a project developed using 430. After studying for a few days, I still don't understand how to write programs into the microcontrol...
Today I built a resistor. A 20M ohm resistor was connected to 3V, and then a 50M ohm resistor was connected to ground for voltage division. The voltage was then followed and output to the microcontrol...