This range of Power Wirewound Resistors are wound on continuous glass fibre elements
or have a ceramic core depending on resistance value. The element is housed in a
ceramic case and sealed with an inorganic silica filler. Their construction gives a resistor
with high insulation resistance and low surface temperature, capable of withstanding high
overload currents. These resistors are ideally suited to a variety of applications within
industrial and commercial environments, where performance and reliability are of prime
importance. Applications include fan force ovens, cooker hoods, power supplies and triac
based speed controls. Custom Design Variants in value and style are welcomed.
Characteristics - Electrical
Resistance Values:
Resistance Tolerance:
Maximum Continuous Voltage:
Load Life:
Power Rating:
Series E24 5% E12 10% (see tables for value
limits per style)
±5% ±10%
√P x R
ΔR <±3% 1000 hours at 70°C
See Surface Temperature Curve (below)
Characteristics - Environmental and Mechanical
Temperature Coefficient of Resistance:
Resistance to Solder Heat:
Voltage Coefficient of Resistance:
Operating Temperature Range:
Load Stability:
Long Term Damp Heat:
Shelf Life:
Insulation Resistance:
Dielectric Strength:
Lead Material:
Marking:
200ppm/°C (400ppm/°C below 18R)
ΔR < 0.2% (350°C for 2.5 seconds)
Negligible
-55°C to +350°C
ΔR < 5% (full load at 70°C for 1000 hours)
ΔR < 0.2% (21 days at 40°C for 93% humidity)
ΔR < 1.0% (per 12 months)
> 10000M
2000V RMS
Steel - Solder coat
Legend mark, Manufacturer name, type, ohmic value
and tolerance.
Surface Temperature Rise Curve
SCBH2
SBCH4/5
SBCH6/7
SBCH15
SBCH11
SBCH8
Derating Curve
250
Surface Temperature
200
% of Power
18
150
100
50
0
0
2
4
6
8 10 12
Power in Watts
14
16
NB - SBC Series will
run 15°C hotter than
described here
125
100
80
60
40
20
0
25
75
125
175
225
275
Ambient Temperature
325
375
1773278 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
High Power Resistor
Type SBC (Square Ceramic) Series
Type SBC - SBCH (Axial Power Resistor)
We offer three ceramic profiles for the main wattage sizes.
These are for additional heat dissipation and vertical mounting of resistors.
The suffix for each style is as follows:-
SBC Standard
SBCH 4/5/6/7
SBCH 8/11/15
Type SBCHE (For Vertical Mounting)
We offer SBCHE Styles with one lengthened lead for vertical mounting. See additional hardware on last page.
One Lead Length 20mm longer than case length. Supplied with one longer lead wrapped back in flute in ceramic.
Type SBC - (No Flutes in Ceramic)
Model
SBC-2
SBC-4
SBC-6
SBC-8
SBC-11
SBC-15
Power
Max
4W
5W
7W
9W
11 W
17 W
Ohmic Values
Min Max
R20
R30
R47
1R0
1R0
1R0
6K8
10K
22K
8K2
22K
22K
Dimensions
A
B
L
6.4
6.4
6.4
9
9
9
6.4
6.4
6.4
9
9
9
20
25
38
38
50
75
Weight
Grams
2.3
2.9
4.2
7.4
10.8
15.3
Type SBCH - (Flutes in Ceramic)
Model
SBCH-4
SBCH-5
SBCH-6
SBCH-7
SBCH-8
Power Ohmic Values
Max
Min Max
4W
5W
7W
7W
9W
R20
R30
R47
R33
1R0
1R0
1R0
6K8
10K
22K
10K
8K2
22K
22K
Dimensions
A
B
L
7
7
7
9
9
9
9
8
8
8
10
10
10
10
20
25
38
25
38
50
75
Weight
Grams
2.2
3.5
5.0
6.0
8.0
10.0
15.0
SBCH-11
11 W
SBCH-15
17 W
SBCH - 4, 5, 6
SBCH - 7, 8, 11, 15
L = Length of Ceramic Section
Type SBCLF - (Externally Fused Style)
Model
SBCLF-4
SBCLF-5
SBCLF-7
SBCLF-10
Power
Max
4W
5.5 W
7W
10 W
Ohmic Values Dimensions
Min Max
A
B
L
2R2
2R2
3R3
4R7
2K2
5K6
8K2
12K
10
10
10
10
9
9
9
9
25
38
50
75
Solder for fuse is SnPb 60:40
1773278 CIS BI 06/2011
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
For email, phone or live chat, go to:
te.com/help
High Power Resistor
Type SBC (Square Ceramic) Series
Type SBCV - (Vertical Mount Style)
Model
SBCV-6
SBCV-8
Power Ohmic Values
Max
Min Max
7W
9W
R47
1R0
1R0
1R0
22K
8K2
22K
22K
Dimensions
A
B
L
9
9
9
9
10
10
10
10
25
38
50
75
SBCV-11
11 W
SBCV-15
17 W
Lead drawn through hole in ceramic
Accessories
This device is used with models SBCV.
Order LC1 Support.
These can be used with SBCH/SBCV models.
Order BCV Support Pillar.
How to Order
SBCH
Common Part
SBCH - Axial
SBCV - Vertical
SBCLF - Vertical Fusible
SBCHE - Axial / Vertical
One Long Lead
1 Ohm
(1000 milli Ohms) 1R0
1K Ohm
(1000 Ohms) 1K0
6
Size
1K0
Resistance Value
0.2 Ohm
(200 milli Ohms) R20
J
Tolerance
J - ±5%
K - ±10%
See Relevant Table
N.B. All resistors are supplied with arklone proof seal
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
[color=#000][font=Helvetica, Arial, sans-serif]I had a competition some time ago and thought I could get my expenses reimbursed. So I bought a 5V (6000mAh) lithium polymer battery, which is now idle. ...
There are two buttons on the cape, which are very small and easy to load and unload. The two buttons are connected to GPIO30 and GPIO31 respectively. Pressing the button corresponds to a low level. Th...
[size=5] A single-channel AD conversion unit has a sampling rate of 500 Hz and a sampling accuracy of 12 bits. The sampled data is transmitted via UART. What baud rate should be set? [/size]...
Control questions have always been a must-have in electronic competitions. In recent years, control questions have been constantly changing. What new technologies will appear this year? Will AI appear...
Some of my FPGA resources and many video resources cannot be uploaded. Here is a 280M CD with 17 video lectures~~ (Note: I accidentally posted it to the wrong place. It is at the bottom of the link)
A...
Electric motors and internal combustion engines of the same power have similar torque levels. High power requires high torque, and torque determines a vehicle's acceleration speed, commonly known a...[Details]
We are entering a new era where people are increasingly affordably equipped with more electronic gadgets. Electronics have become essential to our lives. For example, the average consumer now owns ...[Details]
introduction
The concept of the smart home is gradually developing and gaining market acceptance. We believe its ultimate form lies in the interconnection of all home appliances through open i...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
Inverter power supplies on the market can generally be divided into two categories: sine wave inverters and square wave inverters. Some engineers also like to categorize pure sine wave inverters as...[Details]
Methods of DC motor speed regulation:
1. The voltage regulator can be used to change the input voltage and speed directly, which is often used for large kilowatt-level motors.
2. Thyristo...[Details]
With the advancement of science and technology and the promotion of green, energy-saving, and circular development, the demand for precise control and accurate measurement is increasing. In the pow...[Details]
In camera and display systems, the demand for high-performance and low-power data interfaces is driving continuous technological evolution. The evolution of MIPI D-PHY and MIPI C-PHY clearly ...[Details]
Hair dryer structure and working principle: It is mainly used for drying and shaping hair, but it can also be used for local drying, heating and treatment in laboratories, physiotherapy rooms, ind...[Details]
Recently, I received a request to use OK1028A-C to output PWM square wave. However, I found that there was no relevant instructions on the OK1028 platform, so I started writing this article.
A...[Details]
On August 19, Huawei's Executive Director and Chairman of the Device BG, Richard Yu, shared a Weibo post about a conversation he had with a Zunjie S800 owner. The owner had driven over 5,000 kilome...[Details]
Shock absorbers, as the name implies, are responsible for cushioning and absorbing shocks in a car. So how much do you know about shock absorbers and how to replace them in electric cars?
...[Details]
Using the STM32F103 as a microprocessor, a low-cost wireless WiFi music player system was designed. This system, combined with the WM-G-MR-08 (wm631) module for WiFi data reception and the VS1003B ...[Details]
When installing circuits, we all hope to have a safe and protective electrical appliance. Circuit breakers and circuit breakers are such a thing. As we all know, a circuit breaker is an elect...[Details]
As systems become increasingly used in industrial environments, industry safety requirements, as well as national and international safety regulations, need to be constantly updated to ensure a saf...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
