Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
VC1 VCXO Series
Full Size or Half Size Metal Thru-Hole Voltage Controlled Xtal Oscillator
CMOS/ TTL Compatible
Standard Specifications
Model
Frequency Range
Overall Frequency Stability
Operating Temperature Range (OTR)
Supply Voltage (Vcc)
Output Load
Control Voltage Range (CVR)
Pullablity over CVR
Linearity
2.00 MHz
–
160.00 MHz
VC13 & VC15
VC14 & VC16
2.00 to 20.00 MHz 2.00 to 20.00 MHz
20.001 to 160.00 MHz
± 25, 50, 100 PPM
± 15 PPM only
± 15, 25, 50, 100 PPM over OTR
0 to +70°C is standard, but can be extended to
-
40 to +85°C for certain frequencies
5.0 volts and 3.3 volts available
Standard load is 15pF maximum, see Test Circuit 7 (consult factory for
heavier
loads)
0.5 to 4.5 volts for 5.0 volt Supply; 0.0 to 3.3 volts for 3.3 volt Supply
± 25, 50, 100, 150, 200 PPM. Consult factory for ± 300 PPM.
± 10% (Consult factory for ± 5%)
Supply Current
Icc (mA)
Typical
Maximum
Rise and Fall Time
Tr & Tf (nS)
Typical
Maximum
Frequency Range
(MHz)
2.000
20.001
30.001
50.001
60.001
– 20.000
– 30.000
– 50.000
– 60.000
– 160.000
10
15
3.5
20
25
3.0
25
30
3.0
30
35
2.5
TBD
TBD
TBD
Part Numbering Guide
5.0
4.5
4.0
3.5
TBD
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
3 VC14H 100 A Z - 60.0M - XXX
(Internal Code or blank)
Packaging
Tube or
on Pads
Supply Voltage
Blank= 5.0 volts ±5%
Model
3= 3.3 volts ±5% VC13H = Full Size, 5.08mm
VC14H = Full Size, 8.0mm
VC15H = Half Size, 6.0mm
VC16H = Half Size, 7.5mm
Frequency in MHz
Frequency Deviation (Pullability) over CVR
T: ± 25 PPM
X: ± 150 PPM
V: ± 50 PPM
Y: ± 200 PPM
W: ± 100 PPM
Z: ± 300 PPM
Operating Temperature Range
A: 0 to +50
°
C
D: -20 to +75
°
C
B: 0 to +70
°
C
E: -30 to +75
°
C
C: -10 to +70
°
C
F: -40 to +85
°
C
Frequency Stability
(N/a for VC13, 15) 15: ± 15 PPM
25: ± 25 PPM
N/a for 2.0 to 20.0 MHz (VC14, 16)
50: ± 50 PPM
Use VC13, 15 for 2.0 to 20.0 MHz
100: ± 100 PPM
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
VC13: .200 (5.08)
VC14: .315 (8.0) MAX
.031 (0.8)
.300 (7.62)
not to scale
VC15: .236 (6.0)
VC15 & VC16
VC16: .295 (7.5) MAX
.031 (0.8)
.500 (12.7) MAX
Vcc
8
14
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
VC13 & VC14
.600 (15.24)
OUT
.300 (7.62)
5
8
.492 (12.5) MAX
Jan 2004
Vcc
OUT
.300 (7.62)
.020
(.51)
.020
(.51)
7
GND
1
Vcon
4
GND
1
Vcon
.250 (6.35) MAX
.807 (20.5) MAX
.250 (6.35) MAX
.492 (12.5) MAX
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
23
Special Edition for Assessment Centres
京公网安备 11010802033920号
EEWORLD
