8041 Series
Printed Circuit Test Jacks
8041-1G4-1
FEATURES:
The Augat 8041 Series printed wiring board mounted test jacks require
very little mounting space. Used in many applications as signal test points,
they are also used as electromechanical interfaces from daughter cards to
mother boards. Test jack M8041-15G is qualified to MIL-C-39024/11.
This series test jack accepts .080 (2,03) inch dia. test probes in either side
or top side entry models.
• Low profile for close board-to-board stacking
• Test jack cannot be damaged by using oversized probe
• Probe side entry or top and side entry, both qualified to MIL-C-39024/11
• Dimple on printed circuit terminals, retains test jack in P.W.B. during
flow soldering
• Ten brilliant insulation colors available for quick test point reference
• Top entry allows test jack to be probed while beingused as an intercon-
nection socket
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ........................ 15 G's, 0 - 55 Hz monitored for 10 micro seconds
opening per MIL-STD-202, Method 201
Mechanical Shock .......... 50 G's, monitored for 10 micro seconds opening
per MIL-STD-202, Method 202
Durability ...................... 500 Insertions
Insertion Force .............. .080 (2,03) dia. pin., 5.0 lb. max.
Withdrawal Force .......... .080 (2,03) dia. pin., 227 grams (8 oz.) min.
Permeability .................. 2.0 Mu max. MIL-I-17214
Solderability .................. Passed MIL-STD-202, Method 208
ELECTRICAL
Bulk Contact
Resistance .................. 4 Milliohms @ 5 Amps, military;
5 Milliohms @ 5 Amps, commercial
Current Rating ................ 5 Amps DC
Operating Voltage .......... 1,500 Volts RMS @ sea level,
350 Volts RMS @ 50,000 feet
Dielectric Withstanding
Voltage ...................... 2,500 Volts RMS @ sea level, 500 Volts RMS
........................................ @ 50,000 feet per MIL-STD-202, Method 301
Insulation Resistance .... 5,000 x 10
6
Ohms, MIL-C-39024 Section 4.6.5
Capacitance .................... 1 pF @ 5 MHZ
ENVIRONMENTAL
Operating Temperature .. -65°C to +125°C
Salt spray ........................ 4 Milliohms @ 5 Amps per MIL-STD-202,
Method 101
Humidity ........................ 1,000 x 10
6
Ohms per MIL-STD-202, Method 101
Thermal Shock .............. -65°C to +125°C per MIL-STD-202, Method 107
H
MATERIAL SPECIFICATIONS:
Insulator ........................ Nylon
Contacts .......................... Beryllium copper
Platings .......................... Gold
NOTE: Military Test Reference applies specifically to MIL-Qualified Components.
Quality & Innovation From The
Product Group
H24
Thomas & Betts
1555 Lynnfield Road
Memphis, TN 38119
(901) 682-8221 FAX (901) 537-8805
PCB Design
京公网安备 11010802033920号
EEWORLD
