Statfree S Plus™ Dissipative Homogeneous Vinyl
Pebble Embossed Surface
Specifications
ANSI/ESD S20.20
Rtt Resistance:
Standard Document
Electrical Properties
Rtg Resistance:
Flooring
Meets Requirements of:
Typical Values
< 1 x 109 ohms
Limited Lifetime Warranty*
< 1 x 109 ohms
Limited Lifetime Warranty*
Test Procedures/Method
ANSI/ESD STM7.1
ANSI/ESD STM7.1
Physical Properties
Grey
Grounding & Cleaning
If the material is used on top of an already properly grounded ESD
floor (or other substrate),grounding
hardware
may not be necessary.
Where no properly grounded ESD floor is available, grounding
hardware is required to provide a path-to-ground. Rtg compliance
verification measurements must be made as outlined in ESD TR53
with a
surface resistance meter.
See Tech Bulletin
TB-3057
for Statguard® Floor Mat Cleaner
Application Instructions. See
TB-2000
for guidelines regarding the
maintenance and cleaning of ESD Mats.
*Limited Lifetime Warranty
Desco warrants for one year that Statfree® matting products will be free
of defects in materials and workmanship and will guarantee dissipative/
conductive mat properties for the life of the mat. Damage to matting
caused by misuse of any kind, including using inappropriate cleaners is
not covered by Desco Limited Warranty.
RoHS 3, REACH, and Conflict Minerals Statement
See the Desco Industries RoHS 3, REACH, and Conflict Minerals
Statement:
http://www.descoindustries.com/ROHS.aspx
See the Desco Limited Warranty:
http://desco.descoindustries.com/Limited-Warranty.aspx
See the Desco Disclaimer:
http://desco.descoindustries.com/Disclaimer.aspx
Specifications and procedures subject to change without notice
Construction:
Thickness:
Color:**
Texture:**
Weight:
Vinyl/Nitrile Floor Funner
0.375”
Grey
Non-directional, heavy embossed, soil and abrasion resistant
0.65 lbs/ft2 (0.317g/cm2)
Tolerances:
Width +/- 0.250”
Length +/- 0.250” every 1 linear foot of running material.
Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical,
allow the material to relax for at least 4 hours before cutting to size. Always trim with a sharp knife or razor
blade.
**Color and texture may vary between lots and mills
For Sizes and Item Numbers,
Click Here
Made in the
United States of America
Statfree S Plus™ Floor Mat, Vinyl, Homogeneous, Anti-Fatigue, .375" (9.5mm)
DESCO WEST:
3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST:
ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
MATERIAL STATFREE
S Plus
DRAWING PM-120
DATE:
June
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
京公网安备 11010802033920号
EEWORLD
