WWW.PHIHONG.COM
24 Port IEEE802.3at/PoEPLUS Midspan
POE806U for 10/100/1000 Base-T Networks
Features
Compliant with the IEEE802.3at
Standard
2 finger classification
SNMP Management Option
Windows GUI
May power Cisco AP1250 using the
ACCY125X dongle
Applications
VoIP Phones
Access Point
Safety Approvals
cUL/UL
Mechanical Characteristics
Length: 438mm (17.25in)
Width: 228mm (8.98in)
Output Specifications
Model
POE806U-24AT
POE806U-24AT-N
Full Power of 576W—33.6W per Port, No
Power Management required
Full Protection OTP, OCP, OVP
SSL available with SNMPv3
10/100/1000 Base-T Compatible
Limited Lifetime Warranty
1U Rack Mountable (Kit Ships with Unit)
Security Systems
IP Cameras
CE
Height: 44.5 mm (1.75in)
Weight: 3.8Kg (8.5lbs)
Number
of Ports
24
24
Output
Voltage
56V
56V
Load
Min.
10mA
10mA
Max.
600mA
600mA
Output
Power
806W Max
806W Max
SNMP
No
Yes
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at
www.phihong.com for the most up-to-date specifications and contact information.
Revision 1/8/2015
POE806U-24AT Characteristics
INPUT:
AC Input
Voltage Range 90 to 264VAC
Input Frequency 47-63Hz
Input Current:
12.0A (RMS) maximum for 90VAC
10.0A (RMS) maximum for 230VAC
Leakage Current: 3.5mA maximum @ 264VAC 60Hz
AC Inrush Current:
30A (RMS) maximum for 115VAC
60A (RMS) maximum for 230VAC
WWW.PHIHONG.COM
Immunity EN50082-1
ESD:
RS:
EFT:
Surge:
CS:
Voltage Dips
Harmonic:
EN61000-4-2. Level 3
EN61000-4-3. Level 2
EN61000-4-4. Level 2
EN61000-4-5. Level 3
EN61000-4-6. Level 2
EN61000-4-11
EN61000-3-2 Class A
Isolation
Primary to Secondary: 10 OHM 500VDC
Primary to Field Ground: 10 OHM 500VDC
OUTPUT:
Total Output Power
33.6W per port
Total Power 806W
FEATURE:
Cisco
No extern parts required for Legacy devices:
VoIP Phones:
7910, 7912, 7940, 7960
Access Points:
1040, 1140, 1260, 3500
Over Voltage/Current, Short Circuit Protection
Outputs equipped with short circuit protection and
overload protection as per 802.3at specifications
The output can be shorted permanently without damage
Ripple and Regulation
100mV maximum
Efficiency
75% (typical) at maximum load, and 120VAC 60Hz
Hold-up Time
16mS min. 120VAC and maximum load
Over Temperature Protection
Automatic Shutdown without damage
Transient O/P Voltage Protection
60V maximum at switch on and off at any AC line Phase
Indicators
Green LED: Power detected “CONNECT”
Flashing GREEN: IEEE802.3af detected “CONNECT”
at 33.6
Yellow LED: Fault detected
Turn-On Delay Time
20 sec maximum at maximum load, and 120VAC 60Hz,
60Hz
ENVIRONMENTAL:
Temperature
Operation
Non-operation
0 to +40°C
-25 to +65°C
USB Diagnostics Port and NIC Interface
USB “B” port for diagnostics and manual port control
Windows GUI
NIC interface for remote management via secure IP
access
Humidity
Operation
Non-Operation
5 to 90%
5 to 90%
Input Connector
AC Input IEC320 C14
EMC
EN55022 Class A, FCC Class A with UTP cabling
EN55022 Class B, FCC Class B with FTP cabling
Warranty
Limited Lifetime
Isolation Test
Primary to Secondary: 4242VDC for 1 minute
Primary to Ground: 2121VDC for 1 minute
Secondary to Ground: 2121VDC for 1 minute