or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage
*
8)
0.40typ (CURRENT1)
0.20typ (CURRENT1)
50/60 (47 - 440) or DC
74typ (CURRENT1)
78typ (CURRENT1)
77typ (CURRENT1)
80typ (CURRENT1)
15typ (CURRENT1) (At cold start)
30typ (CURRENT1) (At cold start)
0.15/0.30max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN)
/ ( +30V reference number )
/ ( +24V reference number )
t
12
t
15
0.7
/ 0.7
0.5
/ 0.5
1.4
/-
1.0
/-
60max
/ 96max
60max
/ 96max
600max
/ 150max
600max
/ 150max
750max
/-
750max
/-
120max
/ 240max
120max
/ 240max
160max
/ 320max
160max
/ 320max
150max
/ 300max
150max
/ 300max
180max
/ 360max
180max
/ 360max
120max
150max
150max
180max
48max
60max
200typ(ACIN 100V, Io=100%)
*
Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage.
20typ (ACIN 100V, Io=100%)
9.60 - 13.2 (+V and -V are simultaneously adjusted)
13.2 - 16.5 (+V and -V are simultaneously adjusted)
11.5 - 12.5 (+V and -V CURRENT1)
14.4 - 15.6 (+V and -V CURRENT1)
Works over 105% of rated current and recovers automatically
16.8 - 24.0
20.0 - 29.0
LED (Green)
None
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M
W
min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M
W
min (At Room Temperature)
AC500V 1minute, Cutoff current = 25mA, DC500V 50M
W
min (At Room Temperature)
-10 to +71
C
(Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max
-20 to +75
C
, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s
2
(2G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN
Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
Complies with IEC61000-3-2 (Not built-in to active filter
*
7)
*
12
31
X
78
X
85mm [1.22
X
3.07
X
3.35 inches] (without terminal block) (W
X
H
X
D) / 200g max (with cover : 235g max)
Convection
side is fixed.
*5
The sum of +power -power must be less than output power.
*6
t12,t15
can be used as +24 and +30.
*7
When two or more units are used,they may not comply with
the harmonic attenuator. Please contact us for details.
*8
Derating is required.
*9
Figures to rated current 1.
*10
Please contact us about safety approvals for the model with
option.
*11
Please contact us about dynamic load and input response.
*12
Please contact us about class C.
*
Parallel operation with other model is not possible.
*
Derating is required when operated with cover.
*
A sound may occur from power supply at peak loading.
OUTPUT
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
*1
Measured by 20MHz oscilloscope or Ripple-Noise
meter(equivalent to KEISOKU-GIKEN : RM101).
*2
Drift is the change in DC output for an eight hour period
after a half-hour warm-up at 25C.
*3
Figures for 0 to rated current 1.The current not measured
side is fixed.
*4
Figures for 0 to rated current 2.The current not measured
PBA/PBW-26
PBA/PBW-26
PBW15F
Block diagram
PBA/PBW
FUSE
AC250V
2.5A
AC IN
85
-
264V
NOISE
FILTER
INRUSH
CURRENT
LIMIT
RECTIFIER
AND
FILTER
FG
TRANSFORMER
CONTROL
INVERTER
RECTIFIER
AND
FILTER
+V
COM
DC
OUT
CURRENT
SENSING
Photocoupler
RECTIFIER
AND
FILTER
-V
CONTROL
Photocoupler
OVER VOLTAGE
PROTECTION
External view
¶
External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details.
18
Voltage adjust
12.2
±
1.5
[0.48]
[0.71]
2.5
[0.1]
LED
16.5
±
2
Cover name plate
[0.65]
85
[3.35]
+V
COM
70.5
[2.78]
M3
FG
34.5
31
±
0.5
[1.22]
AC(N)
15.1
±
1.5
[0.59]
[0.45] [0.37]
11.5 9.5
Terminal cover
2-M3
Mounting hole
36.5
[1.44]
Point A:C102
22.6
±
1.5
[0.89]
Name plate
[1.36]
AC(L)
[0.3]
7.5
78
-V
2-M3
Mounting hole
[3.07]
Cover (option)
¶
Tolerance :
±1
[±0.04]
¶
Weight : 200g max (with cover : 235g max)
¶
PCB Material/thickness : CEM3 / 1.6mm [0.06]
¶
Chassis material : Electric galvanizing steel board
¶
Dimensions in mm, [
]= inches
¶
Mounting torque : 0.6N
•
m(6.3kgf
•
cm)max
¶
Screw tightening torque : M3 0.8N
•
m(8.5kgf
•
cm)max
¶
Please connect safety ground to the unit in 2-M3 holes.
60
±
0.5
[2.36]
5
[0.2]
[0.71]
18
[1.22]
31
PBA15F
PBW15F
[1.36]
34.5
PBA/PBW-27
PBA/PBW-27
AC-DC Power Supplies Enclosed Type
Ordering information
PBA/PBW
PBA/PBW
PBW30F
PB
1
2
W
3
30
4
F
5
-O
6
-O
R
Recommended EMI/EMC Filter
NAC-06-472
1Series
name
2Dual
output
3Output
wattage
4Universal
input
5Output
voltage
6Optional
*10
C :with Coating
G :Low leakage current
E :Low leakage current
and EMI class A
T :Vertical terminal block
J :Connector type
N :with Cover
N1 :with DIN rail
V :Output voltage setting
potentiometer external-
ly
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The
EMI/EMC Filter is recommended
*to
connect with several devices.
Cover is optional
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
PBW30F-5
15
VOLTAGE[V]
*
6
t
5 ( +10 )
CURRENT1[A] 1.5
CURRENT2[A]
*
5
2.0
*
5
PBW30F-12
31.2
t
12 ( +24 )
1.3
1.7
PBW30F-15
30.0
t
15 ( +30 )
1.0
1.4
SPECIFICATIONS
MODEL
VOLTAGE[V]
CURRENT[A]
FREQUENCY[Hz]
INPUT
ACIN 100V
ACIN 200V
ACIN 100V
INRUSH CURRENT[A]
ACIN 200V
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT1[A]
CURRENT2[A]
*
5
*
9
LINE REGULATION[mV]
*
11
*
3
LOAD REGULATION 1[mV]
*
11
*
4
LOAD REGULATION 2[mV]
*
11
0 to +50
C
*
1
RIPPLE[mVp-p]
-10 - 0
C
*
1
0 to +50
C
*
1
RIPPLE NOISE[mVp-p]
-10 - 0
C
*
1
0 to +50
C
TEMPERATURE REGULATION[mV]
-10 to +50
C
DRIFT[mV]
*
2
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION[V]
OPERATING INDICATION
REMOTE ON/OFF
INPUT-OUTPUT
INPUT-FG
OUTPUT-FG
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS (At only AC input)
CONDUCTED NOISE
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
EFFICIENCY[%]
ACIN 100V
ACIN 200V
PBW30F-5
PBW30F-12
PBW30F-15
AC85 - 264 1
f
or DC110 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage
*
8)
0.4typ (CURRENT1)
0.7typ (CURRENT1)
0.25typ (CURRENT1)
0.4typ (CURRENT1)
50/60 (47 - 440) or DC
75typ (CURRENT1)
77typ (CURRENT1)
78typ (CURRENT1)
75typ (CURRENT1)
81typ (CURRENT1)
79typ (CURRENT1)
15typ (CURRENT1) (At cold start)
30typ (CURRENT1) (At cold start)
0.30/0.65max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN)
/ ( +10V reference number )
t
12
/ ( +24V reference number )
t
15
/ ( +30V reference number )
t
5
1.5
/ 1.5
1.3
/ 1.3
1.0
/ 1.0
2.0
/-
1.7
/-
1.4
/-
20max
/ 36max
60max
/ 96max
60max
/ 96max
250max
/ 100max
600max
/ 150max
600max
/ 150max
500max
/-
750max
/-
750max
/-
80max
/ 240max
120max
/ 240max
120max
/ 240max
140max
/ 320max
160max
/ 320max
160max
/ 320max
120max
/ 300max
150max
/ 300max
150max
/ 300max
160max
/ 360max
180max
/ 360max
180max
/ 360max
50max
120max
150max
60max
150max
180max
20max
48max
60max
200typ(ACIN 100V, Io=100%)
*
Start-up time is 700ms typ for less than 1minute of applying input again from turning off the input voltage.
20typ (ACIN 100V, Io=100%)
4.99 - 6.00 (+V and -V are simultaneously adjusted) 9.60 - 13.2 (+V and -V are simultaneously adjusted) 13.2 - 16.5 (+V and -V are simultaneously adjusted)
4.99 - 5.30 (+V and -V CURRENT1)
11.5 - 12.5 (+V and -V CURRENT1)
14.4 - 15.6 (+V and -V CURRENT1)
Works over 105% of rated current and recovers automatically
6.90 - 10.0
16.8 - 24.0
20.0 - 29.0
LED (Green)
None
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M
W
min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M
W
min (At Room Temperature)
AC500V 1minute, Cutoff current = 25mA, DC500V 50M
W
min (At Room Temperature)
-10 to +71
C
(Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max
-20 to +75
C
, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s
2
(2G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN
Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
Complies with IEC61000-3-2 (Not built-in to active filter
*
7)
*
12
31
X
78
X
103mm [1.22
X
3.07
X
4.06 inches] (without terminal block) (W
X
H
X
D) / 270g max (with cover : 310g max)
Convection
side is fixed.
*5
The sum of +power -power must be less than output power.
*6
t5,t12,t15
can be used as +10,+24 and +30.
*7
When two or more units are used,they may not comply with
the harmonic attenuator. Please contact us for details.
*8
Derating is required.
*9
Figures to rated current 1.
*10
Please contact us about safety approvals for the model with
option.
*11
Please contact us about dynamic load and input response.
*12
Please contact us about class C.
*
Parallel operation with other model is not possible.
*
Derating is required when operated with cover.
*
A sound may occur from power supply at peak loading.
OUTPUT
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
*1
Measured by 20MHz oscilloscope or Ripple-Noise
meter(equivalent to KEISOKU-GIKEN : RM101).
*2
Drift is the change in DC output for an eight hour period
after a half-hour warm-up at 25C.
*3
Figures for 0 to rated current 1.The current not measured
side is fixed.
*4
Figures for 0 to rated current 2.The current not measured
PBA/PBW-28
PBA/PBW-28
PBW30F
Block diagram
PBA/PBW
FUSE
AC250V
3.15A
AC IN
85
-
264V
NOISE
FILTER
INRUSH
CURRENT
LIMIT
RECTIFIER
AND
FILTER
FG
TRANSFORMER
CONTROL
INVERTER
RECTIFIER
AND
FILTER
+V
COM
DC
OUT
CURRENT
SENSING
Photocoupler
RECTIFIER
AND
FILTER
-V
CONTROL
Photocoupler
OVER VOLTAGE
PROTECTION
External view
¶
External size of option T,J,N,N1 and V is different from standard model and refer to 7 Option of instruction manual for details.
18
Voltage adjust
12.2
±
1.5
[0.48]
[0.71]
2.5
[0.1]
LED
16.5
±
2
Cover name plate
[0.65]
103
[4.06]
+V
COM
[2.78]
M3
70.5
FG
[0.3]
7.5
AC(N)
[0.45] [0.37]
11.5 9.5
15.1
±
1.5
[0.59]
Terminal cover
2-M3
Mounting hole
46
±
0.5
[1.81]
40.5
[1.59]
22.6
±
1.5
[0.89]
Point A:C102
Name plate
2-M3
Mounting hole
36.5
AC(L)
[1.44]
78
-V
Cover (option)
[3.07]
¶
Tolerance :
±1
[±0.04]
¶
Weight : 270g max (with cover : 310g max)
¶
PCB Material/thickness : CEM3 / 1.6mm [0.06]
¶
Chassis material : Electric galvanizing steel board
¶
Dimensions in mm, [
]= inches
¶
Mounting torque : 0.6N
•
m(6.3kgf
•
cm)max
¶
Screw tightening torque : M3 0.8N
•
m(8.5kgf
•
cm)max
¶
Please connect safety ground to the unit in 2-M3 holes.
75
±
0.5
[2.95]
8.5
[0.33]
[0.71]
18
[1.22]
31
PBA30F
PBW30F
34.5
[1.36]
PBA/PBW-29
PBA/PBW-29
AC-DC Power Supplies Enclosed Type
Ordering information
PBA/PBW
PBA/PBW
PBW50F
PB
1
2
W
3
50
4
F
5
-O
6
-O
R
Recommended EMI/EMC Filter
NAC-06-472
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The
EMI/EMC Filter is recommended
*to
connect with several devices.
1Series
name
2Dual
output
3Output
wattage
4Universal
input
5Output
voltage
6Optional
*9
C :with Coating
G :Low leakage current
(0.15mA max / ACIN 240V)
E :Low leakage current
and EMI class A
(0.5mA max / ACIN 240V)
T :Vertical terminal block
J :Connector type
R :with Remote ON/OFF
N :with Cover
N1 :with DIN rail
V :Output voltage setting
potentiometer external-
ly
Cover is optional
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
PBW50F-5
30
VOLTAGE[V]
*
8
t
5 ( +10 )
CURRENT1[A] 3.0
CURRENT2[A]
*
6
4.0
*
6
PBW50F-12
50.4
t
12 ( +24 )
2.1
2.7
PBW50F-15
51
t
15 ( +30 )
1.7
2.4
SPECIFICATIONS
MODEL
VOLTAGE[V]
CURRENT[A]
FREQUENCY[Hz]
INPUT
ACIN 100V
ACIN 200V
ACIN 100V
POWER FACTOR(Io=100%)
ACIN 200V
ACIN 100V
INRUSH CURRENT[A]
ACIN 200V
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT1[A]
CURRENT2[A]
*
6
LINE REGULATION[mV]
LOAD REGULATION 1[mV]
*
4
LOAD REGULATION 2[mV]
*
5
0 to +50
C
*
1
RIPPLE[mVp-p]
-10 - 0
C
*
1
0 to +50
C
*
1
RIPPLE NOISE[mVp-p]
-10 - 0
C
*
1
0 to +50
C
TEMPERATURE REGULATION[mV]
-10 to +50
C
DRIFT[mV]
*
2
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION[V]
OPERATING INDICATION
REMOTE ON/OFF
INPUT-OUTPUT
-
RC
*
7
INPUT-FG
OUTPUT
-
RC-FG
*
7
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS (At only AC input)
CONDUCTED NOISE
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
EFFICIENCY[%]
ACIN 100V
ACIN 200V
PBW50F-5
PBW50F-12
PBW50F-15
AC85 - 264 1
f
or DC120 - 370 (AC50 or DC70 Please refer to the instruction manual 2.1 Input voltage
*
3)
0.45typ (CURRENT1)
0.70typ (CURRENT1)
(CURRENT1)
0.30typ
0.40typ (CURRENT1)
50/60 (47 - 63)
76typ (CURRENT1)
81typ (CURRENT1)
81typ (CURRENT1)
77typ (CURRENT1)
83typ (CURRENT1)
83typ (CURRENT1)
0.98typ
0.99typ
0.87typ
0.93typ
15typ (CURRENT1) (At cold start)
30typ (CURRENT1) (At cold start)
0.40/0.75max (ACIN 100V/240V 60Hz, Io=100%, According to IEC60950-1,DENAN)
/ ( +10V reference number )
t
12
/ ( +24V reference number )
t
15
/ ( +30V reference number )
t
5
3.0
/ 3.0
2.1
/ 2.1
1.7
/ 1.7
4.0
/-
2.7
/-
2.4
/-
20max
/ 36max
48max
/ 96max
60max
/ 96max
250max
/ 100max
600max
/ 150max
600max
/ 150max
500max
/-
750max
/-
750max
/-
80max
/ 240max
120max
/ 240max
120max
/ 240max
140max
/ 320max
160max
/ 320max
160max
/ 320max
120max
/ 300max
150max
/ 300max
150max
/ 300max
160max
/ 360max
180max
/ 360max
180max
/ 360max
50max
120max
150max
60max
150max
180max
20max
48max
60max
350typ(ACIN 100V, Io=100%)
20typ (ACIN 100V, Io=100%)
4.99 - 6.00 (+V and -V are simultaneously adjusted) 9.60 - 13.2 (+V and -V are simultaneously adjusted) 13.2 - 16.5 (+V and -V are simultaneously adjusted)
4.99 - 5.30 (+V and -V CURRENT1)
11.5 - 12.5 (+V and -V CURRENT1)
14.4 - 15.6 (+V and -V CURRENT1)
Works over 105% of rated current and recovers automatically
6.90 - 10.0
16.8 - 24.0
20.0 - 29.0
LED (Green)
Optional (Required external power source)
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50M
W
min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M
W
min (At Room Temperature)
AC500V 1minute, Cutoff current = 100mA, DC500V 50M
W
min (At Room Temperature)
-10 to +71
C
(Required Derating), 20 - 90%RH (Non condensing) 3,000m (10,000feet) max
-20 to +75
C
, 20 - 90%RH (Non condensing) 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s
2
(2G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
UL60950-1, C-UL(CSA60950-1), EN60950-1, EN50178 Complies with DEN-AN
Complies with FCC Part15 classB, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
Complies with IEC61000-3-2
*
10
31
X
82
X
120mm [1.22
X
3.23
X
4.72 inches] (without terminal block) (W
X
H
X
D) / 280g max (with cover : 325g max)
Convection
*5
Figures for 0 to rated current 2.The current not measured
side is fixed.
*6
The sum of +power -power must be less than output power.
*7
RC is applied to remote ON/OFF option. RC is isolated with
input/output and FG.
*8
t5,t12,t15
can be used as +10,+24 and +30.
*9
Please contact us about safety approvals for the model with
option.
*10
Please contact us about class C.
*
Parallel operation with other model is not possible.
*
Derating is required when operated with cover.
*
A sound may occur from power supply at peak loading.
OUTPUT
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
*1
Measured by 20MHz oscilloscope or Ripple-Noise
meter(equivalent to KEISOKU-GIKEN : RM101).
*2
Drift is the change in DC output for an eight hour period
after a half-hour warm-up at 25C.
*3
Derating is required.
*4
Figures for 0 to rated current 1.The current not measured
京公网安备 11010802033920号
EEWORLD
