(2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
NOISE
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
REGULATIONS
CONDUCTED NOISE
CASE SIZE/WEIGHT
50
X
26
X
127mm [1.97X1.02X5 inches] (W
X
H
X
D) /150g max (with chassis & cover : 300g max)
OTHERS
COOLING METHOD
Convection
*1
*2
*3
*4
*
*
Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 16W, -2: 17.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current.
Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
Please contact us about safety approvals for the model with option.
Avoid prolonged use under over-load.
Derating is required when operated with chassis and cover.
(2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
NOISE
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
REGULATIONS
CONDUCTED NOISE
CASE SIZE/WEIGHT
65
X
26
X
140mm [2.56
X
1.02
X
5.51 inches] (W
X
H
X
D) / 220g max (with chassis & cover : 400g max)
OTHERS
COOLING METHOD
Convection
*1
*2
*3
*4
*
*
Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 33W, -2: 34.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current.
Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
Please contact us about safety approvals for the model with option.
Avoid prolonged use under over-load.
Derating is required when operated with chassis and cover.
(2G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s
2
(20G), 11ms, once each X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, EN60950-1, EN50178, CSA C22.2 No.60950-1 Complies with DEN-AN and IEC60950-1
NOISE
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
REGULATIONS
CONDUCTED NOISE
CASE SIZE/WEIGHT
83
X
26
X
185mm [3.27
X
1.02
X
7.28 inches] (W
X
H
X
D) / 300g max (with chassis & cover : 550g max)
OTHERS
COOLING METHOD
Convection
*1
*2
*3
*4
*
*
Peak load for 10sec. or less is acceptable if the total wattage is less than the rated wattage(-1: 61W, -2: 62.5W).When the load of +5V is OA, other output can be drawn by 80% of rated current.
Measured by 20MHz oscilloscope or Ripple-Noise meter (equivalent to KEISOKU-GIKEN:RM101).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
Please contact us about safety approvals for the model with option.
Avoid prolonged use under over-load.
Derating is required when operated with chassis and cover.
Detailed explanation of Bitcoin principles and operating mechanisms : https://training.eeworld.com.cn/course/4407Detailed explanation of Bitcoin principles and operating mechanisms...
Reposted from the Internet with deletions and additions, it is impossible to verify who the original author is. Thanks to the original author! Today, millions of people have received higher education,...
程序一:moduletest(in1,in2,in3,in4,in5,in6,in7,in8,switch,outdata);input[3:0]in1,in2,in3,in4,in5,in6,in7,in8;input[2:0]switch;output[3:0]outdata;reg[3:0]outdata;always@(in1 or in2 or in3 or in4 or in5 or ...
[i=s]This post was last edited by dontium on 2015-1-23 11:48[/i] This is a very useful impedance calculator for PCB routing. I hope it is useful to you all!...
When compiling in KEIL, an error message "no an lvalue" is given. If this line of code is removed and the printGB function is called directly, the compilation can pass. I am very confused and look for...
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
This paper establishes a fuel cell engine test platform based on the NI integrated hardware and software environment. This platform can realize the test and control of fuel cell engines and their a...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
12v Lead Acid batteries used in trucks, cars, RVs and uninterruptible power supplies are usually rated at 12V. This circuit monitors the battery, the charge and discharge curves, gives the cu...[Details]
Abstract: With the development and construction of BeiDou II system, China will shift from the situation dominated by GPS to the situation dominated by BeiDou II global navigation system independen...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
LED light sources have many environmental advantages, but early products still have certain technical bottlenecks in heat dissipation and high brightness design that cannot be broken through....[Details]
introduction
Steam turbines are driven by high-temperature and high-pressure steam generated by boilers to run at high speed. They are key power equipment in thermal power plants. The emergenc...[Details]
As the global LED market demand continues to increase, my country's LED industry will face huge opportunities in the future. However, the core LED technology and patents are basically monopolized b...[Details]
Among the uses of electrical energy, lighting accounts for a considerable proportion. Compared with the earlier ordinary incandescent lamps, the fluorescent lamps and energy-saving lamps we commonl...[Details]
Movpower is a portable power bank. It can charge most mobile phones and digital products, such as digital cameras, PDAs, and mobile phones such as Apple, iPod, Blackberry, Motorola, Samsung, Nokia,...[Details]
introduction
Sudan's Muglad Oilfield is a large oilfield jointly invested, developed and constructed by a four-party consortium of China, Malaysia, Canada and Sudan. It consists of 8 satellite...[Details]
The rotor of the brushless DC motor used in electric bicycles is composed of 30 to 40 pieces of NdFeB magnets. Since the surface magnetic field strength of NdFeB magnets exceeds 500mT, the position se...[Details]
With the rapid development of the IT industry, the demand for small DC cooling fans with PWM control (hereinafter referred to as fans) used in electronic products is increasing. This type of DC fan...[Details]
When designing a PLC system, the control scheme should be determined first, and the next step is to select the PLC engineering design. The characteristics of the process and the application require...[Details]