V FPGAs include innovations such as an enhanced core architecture, integrated
transceivers up to 28.05 gigabits per second (Gbps), and a unique array of integrated hard intellectual
property (IP) blocks.
With these innovations, Stratix V FPGAs deliver a new class of application-targeted devices optimized for:
• Bandwidth-centric applications and protocols, including PCI Express
®
(PCIe
®
) Gen3
• Data-intensive applications for 40G/100G and beyond
• High-performance, high-precision digital signal processing (DSP) applications
Stratix V devices are available in four variants (GT, GX, GS, and E), each targeted for a different set of
applications. For higher volume production, you can prototype with Stratix V FPGAs and use the low-
risk, low-cost path to HardCopy
®
V ASICs.
Related Information
Stratix V Device Handbook: Known Issues
Lists the planned updates to the
Stratix V Device Handbook
chapters.
Stratix V Family Variants
The Stratix V device family contains the GT, GX, GS, and E variants.
Stratix V GT
devices, with both 28.05-Gbps and 12.5-Gbps transceivers, are optimized for applications
that require ultra-high bandwidth and performance in areas such as 40G/100G/400G optical communica‐
tions systems and optical test systems. 28.05-Gbps and 12.5-Gbps transceivers are also known as GT and
GX channels, respectively.
Stratix V GX
devices offer up to 66 integrated transceivers with 14.1-Gbps data rate capability. These
transceivers also support backplane and optical interface applications. These devices are optimized for
high-performance, high-bandwidth applications such as 40G/100G optical transport, packet processing,
and traffic management found in wireline, military communications, and network test equipment
markets.
Stratix V GS
devices have an abundance of variable precision DSP blocks, supporting up to 3,926 18x18
or 1,963 27x27 multipliers. In addition, Stratix V GS devices offer integrated transceivers with 14.1-Gbps
data rate capability. These transceivers also support backplane and optical interface applications. These
devices are optimized for transceiver-based DSP-centric applications found in wireline, military,
broadcast, and high-performance computing markets.
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html.
Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
Tianjin FAW Xiali Product Development Center is based on national conditions and conducts independent innovation . "The Product Development Center attaches great importance to the research of automo...
[i=s]This post was last edited by luck_gfb on 2020-10-18 17:26[/i]Today I can finally hand in my homework. I have gone through many hardships along the way. Today I finally succeeded. I am very reliev...
Use STM32's ADC1 and ADC2 to synchronously collect 2 external signals, and the timer interrupt (TIM2_CC2, collects once every 0.01ms, that is, the sampling rate is 100ksps) triggers ADC1 and ADC2 to c...
In DSP 28335, I sample four times in one cycle. Logically, the values of the four samples should be different, but the values of the four numbers in the ADCRESULT register are the same (). Why is this...
1. Objectives
1. Display the clock; the digital tube displays minutes and seconds; use the LED on the development board to display the tenths of the hour and minute
2. Implementation Method
1. Frequen...
On August 24th, Tesla CEO Elon
Musk
revealed information about the upcoming FSD V14, claiming it will outperform human drivers. Tesla FSD lead Ashok stated last year that FSD version 12.5, ...[Details]
There are many different ways of human-computer interaction. The more common ones are listed below:
Mouse interaction: Using a mouse to operate a computer and interact was the most common human...[Details]
The intelligent driving community has its own rhythm. Some are busy pushing new versions and focusing on R&D, others are busy with publicity and promotion, and still others are immersed in mass pro...[Details]
Tesla and BYD, vying for dominance in the global electric vehicle market, are reportedly considering adopting Samsung's AMOLED (active-matrix organic light-emitting diode) technology for their next...[Details]
introduction
With the development of digital and network technologies, broadcasting technology has become increasingly diversified, with the most significant trend being the transition from an...[Details]
New energy vehicles are increasingly popular with consumers due to policies and energy conservation. Once you've purchased your vehicle, maintenance is essential. However, due to the different powe...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
White light LEDs are voltage-sensitive devices. In actual operation, their upper limit is 20mA. However, the current often increases due to various reasons during use. If no protective measures are...[Details]
The Automotive Testing and Quality Assurance Expo (ATE 2025) will open on August 27th. At the expo, Rohde & Schwarz (R&S) will showcase six automotive testing solutions, themed "Intelligently Drivi...[Details]
As the scale and business applications of national e-government networks continue to expand, the data and services transmitted over them are becoming increasingly sensitive and critical. To protect...[Details]
The digital TV set-top box consists of a tuner, QAM demodulator, TS demultiplexer, MPEG-2 decoder, PAUNTSC video encoder, embedded CPU system and peripheral interfaces, CA module, and uplink data m...[Details]
As AI accelerates across industries, the demand for data center infrastructure is also growing rapidly.
Keysight Technologies, in collaboration with Heavy Reading, released the "Beyo...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
Normally, we determine our location and where we want to go by comparing our surroundings with observation and simple GPS tools. However, this kind of reasoning is very difficult for self-driving c...[Details]
1. Ease of Use: The HMI module should be designed to be simple and clear, allowing users to easily operate and configure the energy storage device.
2. Ease of Maintenance: The HMI module should...[Details]
Automotive Electronics
京公网安备 11010802033920号
EEWORLD
