Resistance to sulphur-bearing gas (AS version only): ASTM-B-809
Voltage proof
Volts
Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
ΔR%
ΔR%
ΔR%
ΔR%
ΔR%
1
1
1
0.25
0.25
0.25
500
ΔR%
ΔR%
Maximum
1
0.1
Zero at 155°C
0.1
0.2
0.25
0.05
0.05
0.05
Typical
0.25
0.02
Pulse Performance Data
Pulse Performance Data
Lightning Surge
lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Lightning Surge
lightning surge resistors are tested in
accordance with IEC 60 115-1 using
both 1.2/50µs and 10/700µs pulse shapes.
10 pulses are applied. The limit of
acceptance is a shift in resistance of less
than 1% from the initial value.
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
[i=s]This post was last edited by yanbao on 2021-2-4 12:51[/i]Today, 20210204, Little New Year. The Lunar New Year is coming soon. Looking back on the whole year of 2020 , there are too many things to...
Here is a video demonstration: [url=http://www.kickstarter.com/projects/2017062404/b-go-beyond?ref=live][color=#0066cc]http://www.kickstarter.com/projects/2017062404/b-go-beyond?ref=live[/color][/url]...
The last bus of the last busI haven't been home recently, so I took some photos when I went home this time to show off my workshop! Here's the overall effect! The instrument I use the longest at prese...
This is a previous project, which used a parallel port thermal infrared printer. This program is a test program for the printer. I share it here, and you can take a look if you need it....
A multi-point temperature control heating control system was designed using the SST89E564RC single-chip microcomputer and a new temperature measuring device. The heating system can be controlled in...[Details]
my country is a big country in agriculture, grain production and consumption. Grains are a necessary condition for our nation to survive and develop. The flour processing industry will exist forever w...[Details]
This paper designs a 16x16LED Chinese character display bar based on single-chip dynamic scanning control, briefly analyzes the principle of Chinese character display, and studies how the LED displ...[Details]
1 Overview
In the field of traditional lighting, the concepts and definitions of lamps and lamps are clear. Lamps and lamps have their own applicable product standards, supporting technical st...[Details]
Any power transmission and distribution equipment and power-consuming devices cannot be pure resistive loads, so they must occupy a certain amount of reactive power. The existence of reactive curre...[Details]
Today's advanced electronic systems for the telecom and datacom markets rely heavily on high-performance, fine-line digital ICs (FPGAs, DSPs, and/or ASICs) to quickly and efficiently process time-s...[Details]
With the reform of the education system, the proportion of funds invested in teaching facilities by colleges and universities has become increasingly important. As the most basic hardware condition fo...[Details]
Pure C51 reset function: A junior student, who makes people love and
fear The single-column reset part is as follows:
main()
{
unsigned char code rst ={0xe4,0xc0,0xe0,0xc0,0xe0,0x32}; ...[Details]
LED display screens need to be controlled by a control system based on an application-specific integrated circuit (ASIC). Companies such as Maxin, Agilent and Toshiba are the world's major manufact...[Details]
0 Introduction
The advantages of the MAC protocol based on CSMA/CA are its simplicity and robustness. It is suitable for distributed networks. Each node does not need to maintain and dynamically upd...[Details]
A new trend in embedded systems has emerged with the advent of a new class of products that we at Missing Link ELECTRONICS call “smart products.” This term is derived from the recently coined term ...[Details]
The high-pressure common rail system consists of a high-pressure fuel pump, a common rail, an injector, an electronic control unit (ECU) and various sensors. The low-pressure fuel pump inputs the fuel...[Details]
introduction
With the increasing opening and competition of the telecommunications market, operators are facing greater pressure and need to improve investment recovery efficiency and increase...[Details]
License plate recognition technology is an important means of traffic automation management and an important part of the vehicle detection system. It gives recognition results in a computer-process...[Details]
Change the multimeter probe to an anti-breaking probe
The multimeter probe can easily break at the end of the pen.
The above disadvantages can be avoided by making a section ...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
