EL6262C - Product Brief
EL6262C - Product Brief
Quad 20MHz & Quad, 70MHz, Switched Gain Pre-Amp
Features
• Autozero of output offset to
<10mV
• 3 selectable gains; 8KΩ, 15KΩ,
40KΩ
• Space saving QSOP-24 package
• Differential Sum & Sum-Bar
outputs
• Single 5V supply
General Description
The EL6262C consists of 4 20MHz trans-impedance amplifiers and 4
70MHz trans-impedance amplifiers. The four 70MHz amplifier out-
puts also are averaged to provide differential 70MHz outputs.
The EL6262C is designed to amplify the photo diode currents for CD,
DVD, or other photo diode pick-up applications.
Two TTL/CMOS compatible inputs select the gain for all eight ampli-
fiers. The gain settings are 8KΩ, 15KΩ, and 40KΩ for all channels.
The sum and sumbar outputs are 11KΩ, 20KΩ, and 45KΩ single
ended. Gain matching is typically 3%, channel to channel. An auto-
zero input brought high after power up reduces the output offsets to
less than 10mV.
The E, F, G, and H channel bandwidths are 20MHz for all gains and
reasonable input and output loads. The A, B, C, D, S, and S channels
have bandwidths of 70MHz, 46MHz, and 32MHz at low, middle, and
high gains respectively after driving 25cm of flex circuit.
Each amplifier output can typically sink or source up to 5mA and their
outputs can swing 1V
P-P
at full bandwidth.
Outline #
MDP0040
Applications
•
•
•
•
•
•
DVD RAM, RW, and ROM
CD RW, R and ROM
MO drives
Optical Pickup pre-amplifier
Servo positioning systems
High speed instrumentation
Ordering Information
Part No
EL6262CU
Temp. Range
0°C to +70°C
Package
24-Lead QSOP
The EL6262C operates from a single +5V supply and is available in
QSOP-24 package. It is specified for operation from -0°C to 70°C.
Connection Diagram
GAIN 0 SELECT 1
GAIN 1 SELECT 2
REF INPUT 3
A INPUT 4
B INPUT 5
C INPUT 6
D INPUT 7
0V (VSS) 8
E INPUT 9
F INPUT 10
G INPUT 11
H INPUT 12
24 AZ INPUT
23 SUM OUTPUT
22 SUM OUTPUT
21 A OUTPUT
20 B OUTPUT
19 C OUTPUT
18 D OUTPUT
17 +5V (VDD)
16 E OUTPUT
15 F OUTPUT
14 G OUTPUT
13 H OUTPUT
June 8, 2000
Note:
All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
EL6262C - Product Brief
EL6262C - Product Brief
Quad 20MHz & Quad, 70MHz, Switched Gain Pre-Amp
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the cir-
cuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described
herein and makes no representations that they are free from patent infringement.
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used
within Life Support Systems without the specific written consent of
Elantec, Inc. Life Support systems are equipment intended to sup-
port or sustain life and whose failure to perform when properly used
in accordance with instructions provided can be reasonably
expected to result in significant personal injury or death. Users con-
templating application of Elantec, Inc. Products in Life Support
Systems are requested to contact Elantec, Inc. factory headquarters
to establish suitable terms & conditions for these applications. Elan-
tec, Inc.’s warranty is limited to replacement of defective
components and does not cover injury to persons or property or
other consequential damages.
Printed in U.S.A.
Elantec Semiconductor, Inc.
June 8, 2000
675 Trade Zone Blvd.
Milpitas, CA 95035
Telephone: (408) 945-1323
(888) ELANTEC
Fax:
(408) 945-9305
European Office: +44-118-977-6020
Japan Technical Center: +81-45-682-5820
2
京公网安备 11010802033920号
EEWORLD
