Pressure Connections and Recommended Installation Torque
Dimensions in mm [Inch]
Name
Thread
Torque
1/4 - 18 NPT
External
25 Nm
1/8 - 27 NPT
External
14 Nm
Schrader deflator
Internal
15 Nm
Name
Thread
Torque
7/16 – 20 UNF 2A
External
16 Nm
Note: Recommended torque may varify according to material and specific application.
www.kavlico.com
P528 Data Sheet
4
How to Order
Seal Material
C Neoprene (-30° to 120°C)
F Ethylene Propylene (-40° to 120°C)
H HNBR (-20° to 125°C)
Pressure Connection (port)
1 1/4 - 18 NPT (External Threads)
2 1/4 SAE Female flare w/schrader deflator
3 7/16 - 20 UNF 2A (External threads)
4 1/8 - 27 NPT (External threads)
P528
Pressure Ranges
6B
0 – 6 Bar
16B
A
Reference
A Absolute
G Gage
C
1
A
Built-in Electrical Connection
A With Mating Connector, w/12”, 18
AWG Leads
C Without Mating Connector
100 0 – 100 PSI
150 0 – 150 PSI
300 0 – 200 PSI
400 0 – 300 PSI
600 0 – 500 PSI
750 0 – 750 PSI
1000 0 – 1000 PSI
10B 0 – 10 Bar
16B 0 – 16 Bar
25B 0 – 25 Bar
40B 0 – 40 Bar
50B 0 – 50 Bar
70B 0 – 70 Bar
S Sealed Gage (Referenced to
14.7 PSIA)
Example:
P528 -16B - A - C1A
Description:
P528 Sensor, 0 - 16 Bar Absolute, Fluorosilicone Seal Material, 1/4 - 18 NPT Pressure Connection,
with Mating Connector
Before installation and operation, ensure that the appropriate pressure sensor has been selected in terms of pressure range, design and specific measuring
conditions. Non-compliance can result in serious injury and/or damage to the equipment.
Warning:
The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form of
contractual commitment. Kavlico reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use
or application of our products and it is the responsibility of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for
the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition,
deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not
been expressly agreed by us prior to the sale of our products.
RT-Thread 1.0.1 is a bug fix version of version 1.0.0, which only modifies the existing functions on the original basis (there are basically no new functions). Changes in version 1.0.1 compared with v...
[p=26, null, left][color=#000][font=Arial]The voltage gain of the voltage follower is 1, so it is called a voltage follower. It is a common collector circuit composed of a triode. The signal is input ...
TMS320F28035 is one of the Piccolo series DSPs newly launched by TI . It has a high cost-effectiveness and excellent DSP control performance. For beginners, it is more suitable than 2812 : single powe...
I designed a dialog box, and by clicking a button control, I can import data and store it in an array. Before, I wrote the code in the function of this control, but now I want to store this data in a ...
Recently, there is a small topic: Use CPLD and STM32 microcontroller to design a board with 12 signal input interfaces (each interface is independent and has its own fixed address). When 1 to 4 square...
1 Introduction
A wide variety of communication cables and control cables are widely used in various instruments and control equipment. Whether the cable is well-conducted and
whether
th...[Details]
China's new energy vehicles are in a transition period from research and development to real industrial development. In 2012, with the intensive launch of new energy vehicle policy planning, the de...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
MediaTek (2454) announced the acquisition of F-MStar (3697) and attracted the attention of IC design industry. This morning, Gartner Semiconductor Industry Research Director Hong Cenwei analyzed ...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
Continuity test
A variety of devices need to be checked for continuity, including cable assemblies, printed circuit boards, and connectors to ensure that these components have the expected contin...[Details]
introduction
MEMS is a high-tech that has flourished on the basis of integrated circuit production technology and dedicated micro-electromechanical processing methods. Pressure sensors develop...[Details]
LED lighting: Basic circuit design can be completed in as little as one day
Semiconductor manufacturers are also getting involved in the LED lighting business. The power circuit of LED req...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
Introduction
X1226 has the functions of clock and calendar. The clock relies on hour, minute and second registers to track, and the calendar relies on date, week, month and year registers to tr...[Details]
The ARINC429 bus is one of the most commonly used communication buses between various subsystems of avionics. As the "skeleton" of modern avionics systems, once the bus system or the attached airbo...[Details]
In order to develop lighting LED technology, developed countries attach great importance to the research of LED testing methods and standards. For example, the National Institute of Standards and T...[Details]
Based on the actual situation, a remote intelligent anti-theft alarm device for home use, connected to the telephone line, simple to operate, and stable and reliable in operation is designed. When ...[Details]
Stepper motors, also called steppers, use the principles of electromagnetism to convert electrical energy into mechanical energy and have been used since the 1920s. With the increasing popularity o...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
