www.hammfg.com
Series 2000- NEMA 4
Single Door Enclosures
Order
Panel
Separately
Industrial Enclosures
Wallmount Enclosures
Application
Designed to enclose electrical and/
or electronic equipment and protect
against harsh, industrial
environments for wallmount
applications.
Provides protection where
equipment may be hosed down or
otherwise be very wet, or in outdoor
applications for full weather
protection.
Attractive design offers high tech
styling and convenient user features.
For high temperature applications, a
gasket retainer may be required,
please refer to factory.
Construction
Formed 14 gauge steel bodies with
14 gauge steel doors.
Smooth, continuously welded
seams without knockouts, cutouts or
holes.
Body stiffeners are provided where
required for increased strength and
rigidity.
Door profiles provide increased
strength and are pre-punched to
provide mounting options.
Formed lip on door and enclosure
exclude flowing liquids and
contaminants.
Doors may be easily removed,
reversed or interchanged.
Slotted quarter turn oil-tight latches
secure the door, with optional
tamper resistant and locking latches
available.
Steel hinges are painted black.
Oil resistant gaskets are
permanently secured.
Compression stops ensure optimum
gasket performance.
Collar studs are provided for
mounting inner panels and
accessories.
A bonding screw is provided on the
door and a grounding stud is
provided in the enclosure.
A literature pocket is provided for the
inside of the door except as noted.
1
Finish
Cover and enclosure are finished in
recoatable smooth ANSI/ASA 61
gray powder coating.
Optional steel inner panels are
finished in white powder coating.
Accessories
Air conditioners
...see page
348-357
Blowers
...see page
359
Breather kits
...see page
374
Depth extension ring kit
...see page
42
DIN rails
...see page
44
DIN rail mounting kit
...see page
44
Filter fans
...see page
360-367
Fixed rack mounting kits
...see page
44
Floor stand kits
...see page
394
Heaters
...see page
369-371
Inner panels
...see page
42
Locking handles
...see page
45
Louvered ventilating plates
...see page
396
Mounting foot kits
...see page
45
Quarter turn inserts & keys
...see page
45
Replacement quarter turn
assemblies
...see page
45
Swing frames
...see page
43
Swing panels
...see page
43
Terminal kit assemblies
...see page
386
Thermostats
...see page
374
Window doors
...see page
42
Padlock Adapter (EPA)
...see page
382
Standards
UL 508 Type 3R, 4, and 12
CSA Type 3R, 4 and 12
Complies with
NEMA Type 3R, 4, 12 and 13
IEC 529, IP66
Technical references and DXF downloads available at www.hammfg.com
All dimensions in inches unless specified otherwise
40
Quality Enclosures. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.651.0086
Data Subject to change without notice
Embedded System
京公网安备 11010802033920号
EEWORLD
