11/6/2017
Type 4X Stainless Steel Two Door Floormount Enclosure (1422 N4 SS Series) - Hammond Mfg.
Quality Products. Service Excellence.
Type 4X Stainless Steel Two Door Floormount Enclosure
1422 N4 SS Series
Continuous Hinge Door with Clamps
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
Provides protection where equipment may be hosed down or otherwise be very wet, or in
specific applications where corrosion is a serious problem.
Standards
UL 508A Type 3R, 4, 4X, and 12
CSA Type 3R, 4, 4X, and 12
Complies with
NEMA Type 3R, 4, 4X, 12 and 13
JIC EGP-1-1967
IEC 60529, IP66
Construction
Formed 12 gauge 304 or 316 stainless steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Body stiffeners are provided in the larger enclosures for extra rigidity.
Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles.
Center post is removable for easy installation of the inner panel.
Formed lip on door and top of enclosure opening exclude flowing liquids and
contaminants.
Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
Doors are secured with heavy duty stainless steel clamps.
Provision for padlocking.
12" floor stands are welded to the enclosure.
Seamless poured-in place gasket.
Panel supports are provided for easy panel installation.
Collar studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in the enclosure
for each door.
A literature pocket is provided.
Finish
Cover and enclosure are natural stainless steel with a smooth brushed finish.
Removable inner panel is finished in white powder coating.
Accessories
Ventilation
Door Stop Kit
Door Support Guide
Wallmount Quick Release Clamp
Window Kits
Ground Wire Kits
https://www.hammfg.com/electrical/products/corrosion/1422n4ss
Door Clamping Hardware
Drip Shield Kit
Type 1 Louvered Ventilating Plates
Temperature Controls
Inner Panels
1/2