Resistance to sulphur-bearing gas (AS version only): ASTM-B-809
Voltage proof
Volts
Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
ΔR%
ΔR%
ΔR%
ΔR%
ΔR%
1
1
1
0.25
0.25
0.25
500
ΔR%
ΔR%
Maximum
1
0.1
Zero at 155°C
0.1
0.2
0.25
0.05
0.05
0.05
Typical
0.25
0.02
Pulse Performance Data
Pulse Performance Data
Lightning Surge
lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Lightning Surge
lightning surge resistors are tested in
accordance with IEC 60 115-1 using
both 1.2/50µs and 10/700µs pulse shapes.
10 pulses are applied. The limit of
acceptance is a shift in resistance of less
than 1% from the initial value.
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:02[/i]The SSL2108x series is designed for non-isolated topologies and provides a unified design platform for the 100V to 230V market...
Hello everyone! I am new to WINCE and now I want to develop a program on a terminal with Wince5.0. I use C#. When debugging on the terminal, I encounter a problem that the image cannot be displayed. T...
EPS power supply is also called EPS, EPS emergency power supply, fire emergency power supply, full name Emergency Power Supply. EPS is mainly aimed at solving the primary load power supply equipment s...
I am a beginner and would like to ask for help on the difference between servo motor control and PMSM motor control. What is the difference between these two types of motors?...
I have 12 pieces of non-contact infrared temperature sensor MLX90615, which can be used to DIY infrared ear thermometer to measure the temperature of children. Each piece is 30 yuan, not including pos...
【
Abstract
】
RFID technology will be ubiquitous in the future, and there is no doubt about it, because it brings convenience and timeliness to people, which means efficiency and...[Details]
Engineers who are new to wireless design and wireless product development need to master the basics of
RF measurement
. In many cases, this process is to enable engineers who have been engag...[Details]
1 Introduction
In the current test field, the correlation detection method is increasingly widely used for filtering. Correlation filtering can easily separate a signal of a specific frequency...[Details]
Chapter 1 Proposal
Endless salespeople interrupt your normal work schedule;
Employees leave their work stations without permission during working hours;
Unauthorized persons ente...[Details]
Semiconductor devices used in high-end computing (advanced microprocessors) and consumer electronics (graphics and gaming chipsets) devices generally provide data rates up to 6.4Gbps through hig...[Details]
Preface
In the analog era, due to the unchanged specifications and relatively simple device connections, as well as users' low requirements for image quality, the relatively simple environment...[Details]
The rapid growth of consumer video applications, from portable media players and cell phones to video game consoles, requires a multitude of different interfaces and adapters to enable users to tra...[Details]
1 Introduction
With the rise of my country's automobile industry, the demand for related in-vehicle electronic products is growing, and has become a research and development hotspot in the...[Details]
After being widely adopted in applications such as backlighting of portable products with small and medium-sized screens, light-emitting diodes (LEDs) have entered the field of general lighting in ...[Details]
Overview and application status of IC card access control
IC Card Access Control Overview
System Overview: Use IC card as the carrier to realize identity recognition and access co...[Details]
Broadcom Corporation announced that its integrated digital TV system-on-chip (SoC) solution, the BCM3549, has been selected by LG Electronics for use in two new broadband high-definition television...[Details]
0 Introduction
With the release of the "Elevator Supervision and Inspection Regulations", new requirements have been put forward for the inspection quality of elevators by inspection agenc...[Details]
After more than 20 years of development, Ethernet has become an indispensable part of the underlying connection in modern Internet. It is easy to network and has better openness, making it one of t...[Details]
1. Overview
At present, there are many cases related to motor vehicles among all kinds of criminal crimes, such as hit-and-run, theft and robbery of motor vehicles, etc. If an automatic mo...[Details]
introduction
In simple single-chip microcomputer application systems, the foreground/background system is widely used. The application is an infinite loop, in which the corresponding funct...[Details]
Mobile and portable
京公网安备 11010802033920号
EEWORLD
