IllumInatIon
luXEon 3014
Hot-color targeted industry standard
package for uniform light
LUXEON 3014 is an industry standard compatible footprint for ease
of installation into existing 3014 sockets and stays consistent with a
3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted
at operating conditions—65°C. This low power device is an ideal
choice when uniformity and reduction in spottiness is necessary for
indoor designs.
FEaturEs and BEnEFIts
Industry standard footprint and package offering compatibility with
existing designs
1/9
th
ANSI micro-color binning enables tight color control
Hot-color targeted at 65°C which leads to better color accuracy
Rectangular package design allows for increased uniformity
Drive at maximum current, 120mA for superior value
PrImary aPPlIcatIons
Indoor Area Lighting
Lamps
Specialty Lighting
–
Monochrome LED
–
Channel Lighting
– Signage
DS208 LUXEON 3014 Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
No. E352519
COMPLIANT
RoHS
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Bin and Labeling Definitions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reflow Soldering Guidelines
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Packaging and Labeling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pocket Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Moisture Barrier Bag (MBB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Shipment Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3014 LEDs are tested with a 20ms monopulse of 60mA at a junction temperature,T
j
, of 25°C. Forward voltage and
luminous flux are binned at a T
j
of 25°C, while color is hot targeted at a T
j
of 65°C.
Part Number Nomenclature
Part numbers for LUXEON 3014 follow the convention below:
L 1 3 0 –
A A B B Y Y
1 4 0 0 0 0
C
Where:
A A
–
designates nominal CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K,
50=5000K, 57=5700K, 65=6500K, 80=8000K, 10=10000K)
B B
–
Y Y
–
C
–
designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)
designates platform (HE=new generation for 80CRI, 00=previous generation)
designates Lumileds internal code (1 is full distribution base part; 2, 3, etc.=shares the same base part)
Therefore, the following part number is used for a new generation LUXEON 3014 3000K 80CRI:
L 1 3 0 –
3 0 8 0 H E
1 4 0 0 0 0
C
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3014 is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1 . Product performance of LUXEON 3014 at 60mA and 30mA at test temperature .
nomInal
cct
[1]
8000K
10000K
2200K
2500K
2700K
3000K
3500K
4000K
5000K
5700K
6500K
2200K
2700K
3000K
3500K
4000K
5000K
5700K
6500K
mInImum
crI
[2, 3, 4]
70
70
80
80
80
80
80
80
80
80
80
90
90
90
90
90
90
90
90
lumInous FluX
[3]
(lm)
mInImum
25
23
19
21
23
23
23
25
25
25
25
16
18
19
19
20
20
20
20
tyPIcal
60ma
28
27
22
24
26
26
26
28
28
28
27
18
20
20
22
23
23
23
23
150
145
118
129
140
140
140
150
150
150
145
97
102
102
113
113
118
118
113
15
14
12
12
13
13
13
15
15
15
15
9
11
11
12
12
13
13
12
tyPIcal
lumInous
EFFIcacy (lm/W)
tyPIcal
lumInous
FluX (lm)
tyPIcal
lumInous
EFFIcacy (lm/W)
30ma
172
166
135
148
161
161
161
172
172
172
166
99
118
118
129
129
140
140
129
L130-8070001400001
L130-1070001400001
L130-2280HE1400001
L130-2580HE1400001
L130-2780HE1400001
L130-3080HE1400001
L130-3580HE1400001
L130-4080HE1400001
L130-5080HE1400001
L130-5780HE1400001
L130-6580HE1400001
L130-2290001400001
L130-2790001400001
L130-3090001400001
L130-3590001400001
L130-4090001400001
L130-5090001400001
L130-5790001400001
L130-6590001400001
Part numBEr
Notes for Table 1:
1. Correlated color temperature is hot targeted at T
j
=65°C.
2. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
3. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
4. For 90CRI products, R9≥50.
Optical Characteristics
Table 2 . Optical characteristics for LUXEON 3014 at 60mA, T
j
=25°C .
Part numBEr
L130-xxxxxx1400001
tyPIcal total IncludEd anglE
[1]
140°
tyPIcal VIEWIng anglE
[2]
116°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3 . Electrical and thermal characteristics for LUXEON 3014 at 60mA, T
j
=25ºC .
Part numBEr
L130-xxxxxx1400001
ForWard VoltagE
[1]
(V)
mInImum
2.8
tyPIcal
3.1
maXImum
3.3
tyPIcal tEmPEraturE
coEFFIcIEnt oF ForWard
VoltagE (mV/°c)
[2]
-2.0 to -4.0
tyPIcal thErmal
rEsIstancE—JunctIon
to soldEr Pad (°c/W)
35
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4 . Absolute maximum ratings for LUXEON 3014 .
ParamEtEr
DC Forward Current
[1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature
[1]
(DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature
[1]
LED Storage Temperature
Soldering Temperature
Allowable Reflow Cycles
Reverse Voltage (V
reverse
)
maXImum PErFormancE
120mA
150mA
115°C
Class 2
-40°C to 105°C
-40°C to 100°C
JEDEC 020D 260°C
3
-5V
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current
3. At 10% duty cycle with pulse width of 10ms.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
4
京公网安备 11010802033920号
EEWORLD
