Model 6405, 6413 and 6580
Insulation Piercing Clips
24” (60cm)
Model 6580-24
12” (30cm)
Model 6580-12
FEATURES:
Model 6405
Make contact with insulated wires without cutting or stripping insulation
or 6413
Spring loaded double V clamp holds wire centered for piercing needle
Pierces insulation on wires from 22 to 14 AWG (0.030” through 0.180” diameter)
Tiny hole left in insulation can easily be sealed
High visibility bright yellow body
6580 extended length probe has heat resistant Teflon® sleeve.
6405 and 6580 mates with standard .16” (4 mm) banana plug test leads, with or without safety shroud (e.g. 5907A or “B”
series patch cords).
6413 mates with standard .080” (2 mm) standard pin tip test probe (e.g. 5519A).
Red or black color-coded cap for easy identification
Rotating banana jack will not twist test lead while the needle is screwed into wire
MATERIALS:
Piercing tip: hardened stainless steel
Spring: steel
Jack: brass
6405 and 6413:
Banana jack, body and tip: nylon red or black caps with high visibility yellow nylon.
6580 series :
Banana jack and body: red or black caps with high visibility yellow nylon.
Tube: Brass encapsulated with high yellow visibility Teflon® insulation.
Tip: Zytrel ST801
RATINGS:
Operating Voltage: 33Vrms or 70Vdc Max.
Current: 1 Amperes Max.
ORDERING INFORMATION:
6405: for banana plug connections, set includes two clips, one red and one black
6413: for pin tip connections, set includes two clips, one red and one black
6580-12-0: for banana plug connections, black, 12.0” (30 cm) in length.
6580-12-2: for banana plug connections, red, 12.0” (30 cm) in length.
6580-24-0: for banana plug connections, black, 24.0” (60 cm) in length.
6580-24-2: for banana plug connections, red, 24.0” (60 cm) in length.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
4” (10,16cm)
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094956
Page 1 of 2
Model 6405, 6413 and 6580
Insulation Piercing Clips
6413
Standard Pin Tip
.080" (2mm)
Standard Banana Plug .16" (4mm)
6405 or 6580
4.0"
(10,16cm)
.160"
(4,0mm)
0.4"
(10,16mm)
Ø 0.80"
(20,32mm)
.080"
(2,0mm)
6405 or 6413
Clamp Slider
6405
(Banana Jack)
6413
(Pin Tip jack)
2.0"
(50,8mm)
.160"
(4,0mm)
6580
(Banana Jack)
Length
See Ordering Information
6580
0.28"
(7,11mm)
0.80"
(20.3mm)
0.40"
(10,16mm)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094956
Page 2 of 2
Linux and Android
京公网安备 11010802033920号
EEWORLD
