Frequency Stability, Overall ±4.6ppm [-40°C to +85°C]
Operating Temperature Range to -40°C to +105°C
Voltage Control Option for Frequency Tuning [VCTCXO]
Enable Function Option Available
Tape and Reel Packaging, EIA-418
Part Dimensions:
5.0 × 3.2 × 2.0mm
Standard Frequencies
* See Page 7 for common frequencies.
Check with factory for availability of frequencies not listed.
Applications
5G, 4G, LTE
Femtocells, RRU, BBU
Military Radio [Manpack]
Inflight Entertainment
Autonomous Technologies
Synchronous Ethernet
IP Networking
Medical Imaging
Stratum 3
IEEE 1588 Timing
Wireless Communication
Test and Measurement
Description
CTS Model 536 is a high performance Temperature Compensated Crystal Oscillator [TCXO] suitable for
applications requiring tight stability, Stratum 3 performance and more. Employing IC technology with HCMOS
output and analog temperature compensation engine; coupled with a fundamental quartz crystal M536 has
excellent stability and low jitter/phase noise performance.
Ordering Information
Model
536
Output
Enable
Supply
Voltage
L
Frequency Code
[MHz]
Frequency
Stability
X2
2
XXX
Temperature
Range
I
Frequency Tuning
T
Packaging
5
Code Function
Blank No Enable
E Enable, Pin 3
Code
Frequency
Product Frequency Code
1
Temp. Range
Code
-10°C to +70°C
C
-40°C to +85°C
I
G
-40°C to +105°C
3
Code
01
X2
05
Stability
±0.10ppm
±0.28ppm
±0.50ppm
Frequency Deviation
Code
T
TCXO
[No Voltage Control]
A ±5ppm - ±10ppm [
VCTCXO
]
Packing
Code
5 500 pcs./reel
Code
L
Voltage
+3.3Vdc
Notes:
1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
2] Frequency vs. Temperature only.
3] Available with stability code X2 and 05 only.
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
I want to expand NOR FLASH, SDRAM, FPGA, and would like to ask you, is it possible? I mean, use EPI to connect them all? But the manual says that the modes of configuring EPI are different, how can I ...
Dear experts: My program is to measure the duty cycle of PWM. Under normal circumstances, the signal is high level, the falling edge starts timing, and the rising edge ends timing. However, I have fou...
I had nothing to do recently. I saw many people playing with quadcopters, and I felt a little itchy. So I spent some money to buy some parts and wanted to build one myself. I bought two ducts and a ne...
I have saved the data collected by the camera using mmap memory mapping to obtain the image. When I use the write function, the image is in jpeg format. How can I get the image in bmp format? I'm begg...
On August 24, Beijing time, the new e-commerce company Pinduoduo released its second quarter financial report for 2021. The financial report shows that as of June 30, 2021, Pinduoduo's annual active b...