The last program I wrote into the MSP430 is as follows includevoid main(void) { WDTCTL = WDTPW + WDTHOLD + WDTNMI + WDTNMIES;//WDT off NMI hi/lo P2DIR |= 0X01; P2OUT = ~0X01; //Clear p2.0 led off IE1
When I made a board before, I would first place the components and packages, then frame the board and determine the size. But now I am required to directly set the board size and then put the componen
Contents of the routing table: -destination node address -next hop address -link quality ZigBee routing discovery process: Definition: The sender src and the destination dest src broadcast a route req
Originally, PB downloaded NK.bin to FLASH via Ethernet, but it was very troublesome because PB had to be started every time. I want to make an application to download NK.bin to FLASH via Ethernet. Not