I added a 100K resistor to the outside of p2.5Then the program is written like this:void clockset() //{//1M DCODCOCTL=0;//DCO0+DCO1;BCSCTL1 |=RSEL2;//+RSEL0//+RSEL1;BCSCTL2 |=DCOR;//external DCO resis
Sometimes, the memory window of CCS displays all question marks, and the data of the memory address cannot be changed. As shown in the figure below, why is this? Do I have to reset the system and load
Those who are fast have already started to operate, but mine had to go around in circles in this city because of the courier sorting error. Today I can finally open the box. It is really a big box.I a
数码小叶onsemi and Avnet IoT Innovation Design Competition
The sampling value of 2812 is a few tenths of a volt different from the actual analog voltage input. For a 1.1 volt input, the sampled value is about 1.2 or 1.3 volts. And the repeated sampling values
My board now has two FLASH, NOR Flash and NAND Flash. NOR is used to burn nk, and the remaining NAND Flash is used for storage. Because it needs to store both user data (such as a file written by the
The speed is quite fast, but I don’t have time to DIY a board. I will go back and look up the data sheet to see if it can be directly applied to the configuration storage module of FPGA...