CC3D Quadcopter Open Source Data

Overview

As a beginner in CC3D open source flight control, I have encountered many bumps and bumps. So I wrote this article to record them, firstly to sort out the problems and countermeasures encountered, and secondly to help some beginners. OpenPilot is the official website of CC3D. You can only access the homepage, not the wiki. So if you want to understand the principle of the aircraft, you must find another way. First of all, this mode belongs to the entry mode. When the remote control is not moved, the aircraft is horizontal and it is not easy to tilt at a large angle and cause loss of control. It is also a stable mode for aerial photography. Secondly, the joystick controls the tilt. The more you bend the joystick, the more the aircraft tilts, and the joystick is released, the aircraft returns to the horizontal. Finally, the PID algorithm is constantly modifying the tilt to maintain the attitude.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2025-06-19 07:43:28

As shown in the figure below, why does the switching power supply chip explode during the surge test?
When performing the surge test, when L1, L2, and L3 applied a 4KV surge to the neutral line, the switching power supply chip exploded at the first hit, and the high-frequency transformer at the back e
Does integrated GaN change conventional wisdom?
Reprinted from: deyisupport As a power electronics engineer, there is a saying that there is no success that is not based on the lessons of power device explosion. This seems to be true in my many yea
[Smart Wardrobe] Material Unboxing ESP32-S3-BOX
I have used Espressif's development board before, and I feel it is easy to use overall. It is very friendly to the development of audio and video, camera, wifi and Bluetooth functions. After comparing
A ZVS soft switching implementation scheme for a Flyback converter with an auxiliary transformer
Abstract: A novel ZVS soft switching scheme for FLYBACK converter is proposed. A smaller auxiliary transformer is connected in series with the main transformer, and the ZVS soft switching condition of
About register setting problem when RTL8019AS sends data packets
I would like to ask, when using rtl8019as to send a data packet, how do I set the value of the RBCR and TBCR registers? That is, how do I determine the size of the data packet being sent?
A valve is used in the water supply of the product. The valve is opened when water is used and closed when water is not used. How to measure the force of the opening and closing valve?
The product uses a valve for water supply. It opens when water is used and closes when water is not used. There is no in-position switch in the valve controller. It can only rely on the sensor to meas

Datasheet More

Circuits More