The Power Profiler Kit II (PPK2) is a stand-alone unit that, in addition to external hardware, can measure and optionally source current on all Nordic DK boards from sub-uA up to 1A.
An open source multimeter design based on STM32F1/F3, with dual-range V/I, RMS measurement, continuity, component testing and other functions. The author has made all design files open source, which is very suitable for DIY entry.
Through this open source tool, everyone can better understand how program firmware is "exploded", thereby improving product security. Crack AES, crack RSA, crack DES and so on.
This smartwatch can measure linear acceleration, rotational speed, heart rate and SpO2 (oxygen saturation) of the hand
Introduction: The PID temperature control heating stage based on STM32F103C8T6 is very convenient and easy to use. It can display parameters through OLED and control the operation with an encoder.
As for why I want to do this project, I mainly made this heating table for the sake of portability, cheapness and low power.
Introduction: Self-made ST-Link V2.1 not only realizes the ST-Link download function, but also adds the serial port function to realize one-line download program and serial port debugging function.
Introduction: With 485 interface, Quectel EC600N-CN module is used as the communication module, and a 20pin custom interface is reserved.
Introduction: A STLinkV2.1, supporting ST32 Debug+Mass storage+VCP. In the hardware part, the capacitor, resistor and LED are all packaged in 0805 for easy DIY. The firmware uses ST official firmware, supports upgrading to the latest version, and all functions are normal.
Introduction: STM32F103 ZET6 expansion board based on LCD12864 platform icedundun board
Introduction: Question J of the 2021 Electronic Competition (Periodic Signal Waveform Parameter Identification) related design ideas, principles, codes, and demonstration videos.
Introduction: Use Hongmeng system to control switches
Introduction: STC89C52RC core board, a microcontroller in LQFP44 package
Introduction: F405 flight control, MPU6500 gyroscope, low cost. 20, 30 hole double version. The PCB file is in the attachment, and the bf and inav ground stations are connected to the USB cable to flash the firmware. Automatic return test video https://b23.tv/GcbdOsY
Introduction: MATEK F411 fixed-wing flight control STM32F411+MPU6500 gyroscope single panel. Two sets of serial ports, 1 soft serial port.
Adjust the BEC on the back of the PCB to 5v in the attachment before soldering.
Introduction: Use the Hongmeng Hi3861 chip combined with the servo to achieve WIFI remote control of physical switches in your home or dormitory.
Introduction: This system uses the STM32F103 microcontroller as the control core and adopts the PID closed-loop regulation algorithm to realize the constant current (CC) and constant resistance (CR) working modes of the electronic load. Each module can work stably and the system has high control and measurement accuracy.