Introduction: It uses a commonly used 12V power adapter as input and can output directly. There are also 2 boost and 2 step-down channel outputs. Touch switch 1 controls the switch, and touch switch 2 controls the digital tube display switching, which can display the temperature value. (over-temperature buzzer alarm, automatic shutdown) and boost/step-down channel voltage value
Introduction: Schematic diagram and PCB diagram of 16X16 dot matrix module LED dot matrix screen
Introduction: Mountain View DSP1048 integrates high-function multi-
Introduction: The third prize of the 2022 Guangzhou City Polytechnic School of Electrical Engineering Electrical and Electronic Breathing Lamp Design Competition
Introduction: Two NAZE32 flight control boards, flashing Betaflight flight control firmware, can be used to make 2/3/4/6 rotors
Introduction: Arduino development board based on ATMEGA328P-MU microcontroller, similar to NANO/PRO MINI/UNO development board.
Introduction: Laowang’s 0.8 yuan 128x32 OLED screen adapter board screen base model BM20B (0.8)-24DS-0.4V (51) provides a stm32f103c8t6 screen driver (based on Zhongjingyuan Electronics’ 0.87-inch OLED modification)
Introduction: The electronic competition topic, infrared communication transmission, has basically completed the function. There are several shortcomings. One is that the current of the transfer station is relatively large. Due to the limitation of stm32ADC, the receiving frequency is unstable around 2k.
Introduction: STM’s writing machine supports laser firmware but I’m still working on it myself.
Introduction: 10A output buck module based on PL5501 synchronous four-tube buck-boost controller
Introduction: COPY FROM: https://oshwhub.com/x309804917/luo-li-yao-kong-qi12-tong-daov1-1-zhi-cha Loli control 12 channels. To be verified