12 V lead-acid battery sensor with CAN

RD9Z1-638-12V is a battery management system designed to demonstrate the capabilities of the MM9Z1J638 battery sensor IC in 12 V lead-acid applications where high EMC performance is required to obtain high-precision measurements of critical battery parameters.

Schematic PCB

MAXREFDES1095: 92.8% Efficient Small Form Factor, 12V/500mA, Synchronous Optocouplerless Flyback DC-DC Converter

Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-medium isolated DC-DC power-conversion applications. However, the use of an optocoupler or an auxiliary winding on the flyback transformer for voltage feedback across the isolation barrier increases the number of components and design complexity. The MAX17690 eliminates the need for an optocoupler or auxiliary transformer winding and achieves ±5% output voltage regulation over line, load, and temperature variations.

Active clamp forward AC-DC power supply basic simulation circuit

FRDMPT2001EVM: PT2001 evaluation board

KIT08XS6421EKEVB: Evaluation Kit - MC08XS6421EK, Quad Channel High-Side Switch

EPR-9 - 5W, universal input, dual output, isolated power supply

Schematic PCB

DI-118 - 4.56W CV/CC charger, 260mW no power consumption

Schematic PCB

TEA1731DB0001: TEA1731 40 W 19.5 V Notebook adapter

Schematic PCB

KIT34845EPEVME: Evaluation Kit - 34845, LED Backlight Driver, Power Supply

15 W LDO Wireless Charging Receiver Reference Design

TWRPI-MPL115A: Tower System Digital Barometer Plug-In

Schematic PCB

RDR-292 - Reference Design Report for 150W LLC Power Supply for LED Street Lighting

This engineering report describes a 48 V, 150 W reference design power supply for 90 VAC - 265 VAC LED street lights which can also serve as a general purpose evaluation board for the combination of a PFS power factor stage with an LCS output stage using devices from the Power Integration’s HiperPFS and HiperLCS device families.

Schematic PCB

DER-845 - 4.8W non-isolated buck converter based on 900V LinkSwitch-TN2

Schematic PCB

MAXREFDES1088: 91.9% Efficient Small Form Factor, 12V/250mA, Synchronous, Optocouplerless Flyback DC-DC Converter

Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-medium isolated DC-DC power-conversion applications. However, the use of an optocoupler or an auxiliary winding on the flyback transformer for voltage feedback across the isolation barrier increases the number of components and design complexity. The MAX17690 eliminates the need for an optocoupler or auxiliary transformer winding and achieves ±5% output voltage regulation over line, load, and temperature variations.

KIT33912EVME: Evaluation Kit - 33912, SBC, DC Motor Pre-driver

DI-163 - Wide range set-top box power supply with latched overvoltage (OVP) shutdown protection

Schematic PCB

KITPF0200EPEVBE: Evaluation Kit - MMPF0200, 12-Channel Power Management

Touch-sensing software evaluation board supporting the NXP® S08 MCU portfolio

The Touch Sensing Software Evaluation Board (TSSEVB) contains everything you need to get started with touch sensing applications. The touch-sensing software library supports capacitive sensing across the entire NXP® S08 MCU portfolio, providing touch-sensing decoding structures such as keyboard, rotation, and slider.

Schematic PCB

FRDM-PF1510EVM: PF1510 Evaluation Board for low power application processors

Schematic PCB

2019 National Electronic Design Competition Title A Province One Code (Dynamic Wireless Charging System for Electric Cars)

Schematic PCB