Introducing a Bluetooth case - a data transparent transmission application developed based on the MM32W series.
It is convenient for users to use the kite turbine to charge electric bicycles and electric cars when traveling.
The style of enameled wire is as usual, and the craftsmanship is still excellent. The power board designed this time is made of double panels, and a copper-laying design is applied. The insulation layer is laid first and then the copper. If the device on the front needs to be grounded, break the insulation layer and solder it to the copper.
A simple oscilloscope made of STC8A8K MCU. The microcontroller uses STC8A8K64S4A12 working at 27MHz. The display uses a 0.96 OLED with a resolution of 128x64. This oscilloscope project is easy to start and covers the necessary measurement functions. Supports normal mode, single mode, and automatic mode. It has trigger mode selection, such as level trigger, and comes with saved settings. Mini-DSO input is single-channel mode, and the second/division size can support a variety of: 500ms, 200ms, 100ms, 50ms, 20ms, 10ms, 5ms, 2ms, 1ms, 500us, 200us, 100us, and the voltage acquisition range is 0 to 30V. The sampling rate can reach 250kHz@100us/div.
This ESP32-based FPV car can stream video over Wi-Fi and only needs a small LiPo battery for power. It can be controlled remotely and accurately through any web browser.
ST has previously launched a board with a static current measurement range of 1nA - 100mA and a dynamic current measurement range of 100nA - 50mA, but it is not open source. This time it’s open source.
The WiFi remote control is based on ESP32 Pico D4 MCU and 160x80 pixel mini TFT display. Additionally, there are onboard I2C temperature and humidity sensors and an accelerometer.
You can record your life anytime and anywhere, remember people's names, calculate food calories, translate in real time, and have intelligent conversations...
Not only is it open source, the author also has a super-detailed record of the design process. The bandwidth of each analog channel is not reduced in order to reduce costs. Each channel has a bandwidth of 350MHz, and higher sampling rate support can be designed in the future. Thunderbolt USB4 interface, speed up to 1GB/s (8Gbps)
A stator-side direct power control algorithm based on multi-frequency proportional integral resonant controller
HT-Hawk is an open source flight control system suitable for multi-rotor aircraft. It supports four- and six-rotor aircraft. It is an open source autopilot system developed for multi-rotor aircraft enthusiasts. It can achieve attitude stabilization and provide users with excellent performance. Flight experience.
These demos all use Adafruit's PicoDVI branch, which makes the video framebuffer look like a regular Adafruit_GFX object, which makes drawing very easy.
This article designs a vending machine based on the 80C51 microcontroller produced by INTEL.
The Power Profiler Kit II (PPK2) is a stand-alone unit that, in addition to external hardware, can measure and optionally source current on all Nordic DK boards from sub-uA up to 1A.
The Pandora McNado smart car based on Rt-Thread is composed of chassis, drive, battery, Bluetooth, APP control, omnidirectional wheels, etc.
This project uses STM32F103RET6 as the main control, and is modified based on ST's official CMSIS-DAP project to achieve offline and read-protected programming (because the project currently only has F103 series offline programming requirements, so only F103 programming is temporarily added. write algorithm).
Mobile power supply (adjustment OK program + schematic PCB diagram).
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
