Heart-shaped running water lamp program and circuit.
This product has been verified for use and is the best stable program after debugging.
I have an SD2405ALPI-G on hand, and I happen to have an STC learning board, so I made a clock with an annual error of about 2.5 minutes to play with. The schematic and program are all there. Now the hardware has a ringtone generating chip and a power amplifier chip, but the program has only initially implemented the function of displaying the day of the week, hours, minutes and seconds. It will be changed to an alarm clock when there is time.
This article introduces the electronic code lock made with PIC16F84 microcontroller. The PIC16F84 microcontroller has a total of 18 pins and 13 available I/O interfaces. The chip has a 1K×14 FLASHROM program memory, a 36×8 static RAM general register, a 64×8 EEPROM data memory, and an 8-level deep hard stack.
The author has designed a circuit controlled by a microcontroller, and can easily create an automatic hand dryer with a commonly used hair dryer. In addition to the above functions, it also has flashing lights and crisp audio prompts.
The program is written in C language and contains MLX90614 temperature measurement, OLED driver, and 4004-8 voice chip driver. The entire system is user-friendly. The user can choose voice broadcast or OLED display, low temperature or over-temperature alarm, and forehead skin function. Conversion formula from temperature to real body temperature (the formula has been verified by actual measurements and has high accuracy). The entire system has been verified to be feasible, and the measurement results were compared with electronic thermometers on the market, with an accuracy higher than 98%.
51 microcontroller countdown 120 seconds C program
Electronic clock (with temperature measurement function) based on 51 microcontroller comes with schematic diagram and source program. The main functions include: time, alarm clock, hourly time, and temperature.
Open the laptop's built-in camera through matlab and detect faces.
The charger program written with STM8S003 has positive and negative pulses throughout the process, anti-reverse connection, scheduled shutdown during charging, and negative pulses to repair the battery later.
Use AT89C2051 to make your own smart home wireless alarm.
Multifunctional mini computer (SD, wifi, OLED) design source code and related test programs
The composition and working principle of the micro thermal printer based on NUC501MCU are analyzed in detail, and the design and implementation of thermal head overheat protection and stepper motor drive module are given.
51 microcontroller password lock LCD display
MSP430F149+1602 digital display and real-time clock