11mm Rotary Encoder
Type DP11 Series
Type DP11 Series
Characteristics -
Electrical
Pulses:
Contact Rating:
Dielectric Strength:
Insulation Resistance (min):
Operating Speed (RPM):
Switch Power Rating (where fitted):
Switch Contact Resistance:
Electrical Travel:
Rotational Noise:
Chattering:
15, 20
10mA 5VDC
300VAC / 1mA, 1 minute
100M ohms at 250VAC
60 RPM
16VDC, 3A (10mA Min)
100m ohm Max
Continuous
t2 = 2.0 ms max (see below)
t1 & t3 = 3.0 ms max (see below)
11mm Rotary incremental encoder for
use in electronic equipment. Can be
supplied with or without switch with
customisation to standard options
Key Features
■
■
■
■
■
■
11mm Rotary Encoder
Incremental Type
Push on Switch Option
Various Shaft Lengths
Pulse Options
Detent Options
Code Off area V = 3.5V or more. Code on area V=1.5V or less
Characteristics -
Mechanical
Total Mechanical Travel:
Detents:
Switch Operating Force:
Switch Travel:
Shaft Type:
Shaft Length (from Mounting Surface):
Continuous
0, 20, 30
612+/- 306gf (for 1.5mm Switch Travel 400+/- 200gf)
0.5mm (1.5mm available on request)
F – Flatted, K – Knurled, S – Slotted, P - Plain
15, 20, 25, 30 (FMF)
Characteristics -
Environmental
Operating Temperature
Rotational Life
-10 ~ +45 degrees C
15,000 Cycles
Output Signal Format
Shaft Rotational
Direction
Signal
Format
A (Terminal A-C)
Clockwise
B (Terminal B-C)
A (Terminal A-C)
Anticlockwise
B (Terminal B-C)
Literature No. 1773449-8
Issued: 02-08
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
Analog electronics
京公网安备 11010802033920号
EEWORLD
