D A T A S H E E T
Lighting
Imaging
Telecom
Sensors
IN
A
RY
Channel Photomultipliers and Modules
PR
EL
IM
MP 96X-2/ MP 97X-2 CPM Module
Single Photon Counting Module
for Particle Measurement
Description
The Photon Counting module series
MP96X-2 / MP97X-2 is specially
designed for particle measurement with
530 nm and 632 nm lasers. Based on the
standard multialkali photocathode, the
sensitive diameter is reduced to 2mm in
order to achieve an excellent low dark
count performance. With an optional
SMA adapter, also a fiber read out is
possible.
The MP96X-2/MP97X-2 series satisfies
by exceptional low after pulses. It is an
easy to use module, containing the
Channel Photomultiplier, a high voltage
power supply, a discrimination amplifier
and a pulse shaper for fast output pulses.
An installed active quenching system
avoids over- illumination to the detector.
Features
· Specially selected for best performance
@ 530 nm / 632 nm
· Low dark counts
· Very high stability in noise level
· Exceptional low after pulses
· Extended red sensitivity
· No cooling required
· Active quenching circuit for high light
protection
· Optical fiber read-out possible
· 5 volts operating voltage
.
w w w. p e r k i n e l m e r. c o m / o p t o
Technical Specifications
Performance Characteristics
Spectral response
100
Quantumefficiency (%)
10
C 963
1
C 973
C 972
C 962
0,1
100
200
300
400
500
600
700
800
900
Operating Specifications
Supply voltage
Input current at max. count rate
Settling time
Over-illumination protection:
Linear count rate:
Output pulse:
Active Quenching Control
Output pulse width
GATE voltage Vgate
5 V dc
< 280 mA
< 1s (time to stabilize HV after
supply voltage applied)
active quenching control (internal)
5 MHz
TTL, positive
TTL-Pulse, active high, RESET:internal via
timer, typ. 2,5 s, external via 5 V-pulse
15 ns, (opt. 130 ns)
5 V: h to l set time Vca to
Vch-ent +100 V : ~ 150 µs
5 V: l to h set time Vca to
Vch-ent - 100 V : ~ 150 µs
+5.5 V
5 to 40 °C
-20 to 50 °C
~ 350 g
Wavelength (nm)
Count Rate Linearity
1E+8
1E+7
1E+6
Counts
1E+5
1E+4
1E+3
1E+2
1E+1
1E+0
1E-18
1E-17
1E-16
1E-15
1E-14
1E-13
1E-12
1E-11
1E-1
Light intensity [ W @ 410 nm ]
Maximum ratings
Input voltage
Operating temperature
Storage temperature
Weight
Connections
Dimensions (mm)
Red:
Black:
Coax:
Yellow:
Green:
Vcc, input (+5 V to +5.5 V DC)
GND
External Gate in (TTL,active high)
Monitor voltage output (|V
ch-ent
/1000|)
Control voltage input via ext.
OpAmp (ref. to manual)
BNC Connector:
-
TTL Signal Output
-
GND
CPM
CAUTION: HIGH VOLTAGE WARNING
This product operates at high voltage. Extreme care must be taken to ensure operator safety and to avoid damage to other instruments. Avoid direct
contact with the entrance window of the built in CPM when high voltage is applied. Avoid placing conductive material close to the cathode.
Ensure that no light levels are applied, generating higher anode currents than specified.
All given values are nominal/typical @ 20 °C ambient temperature; specification subject to change without notice
USA:
PerkinElmer Optoelectronics
2175 Mission College Blvd.
Santa Clara, CA 95054
Phone: (408) 565-0850
Fax: (408) 565-0793
EUROPE:
PerkinElmer Optoelectronics GmbH
Wenzel-Jaksch-Str. 31
65199 Wiesbaden
Germany
Phone: +49 611 492 534
Fax: +49 611 492 578
ASIA:
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: +65 775 2022
Fax: +65 775 1008
.
© 2001 PerkinElmer, Inc. All rights reserved.
DS-290 Rev A 1101
w w w. p e r k i n e l m e r. c o m / o p t o
京公网安备 11010802033920号
EEWORLD
