EN29F800
EN29F800
8 Megabit (1024K x 8-bit / 512K x 16-bit) Flash Memory
Boot Sector Flash Memory, CMOS 5.0 Volt-only
FEATURES
•
5.0V
±
10%, single power supply operation
- Minimizes system level power requirements
•
Manufactured on 0.32 µm process technology
•
High performance
- Access times as fast as 45 ns
•
-
-
-
Low power consumption
25 mA typical active read current
30 mA typical program/erase current
1 µA typical standby current (standard access
time to active mode)
- Sector erase time: 500ms typical
- Chip erase time: 3.5s typical
•
Low Standby Current
- 1µA CMOS standby current-typical
- 1mA TTL standby current
•
Low Power Active Current
- 30mA active read current
- 30mA program/erase current
•
JEDEC Standard program and erase
commands
•
JEDEC standard
DATA
polling and toggle
bits feature
•
Single Sector and Chip Erase
•
Sector Unprotect Mode
•
Embedded Erase and Program Algorithms
•
Erase Suspend / Resume modes:
Read and program another Sector during
Erase Suspend Mode
•
0.32 µm double-metal double-poly
triple-well CMOS Flash Technology
•
Low Vcc write inhibit < 3.2V
•
>100K program/erase endurance cycle
•
Flexible Sector Architecture:
- One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and
fifteen 64 Kbyte sectors (byte mode)
- One 8 Kword, two 4 Kword, one 16 Kword
and fifteen 32 Kword sectors (word mode)
- Supports full chip erase
- Individual sector erase supported
- Sector protection:
Hardware locking of sectors to prevent
program or erase operations within individual
sectors
Additionally, temporary Sector Group
Unprotect allows code changes in previously
locked sectors.
•
High performance program/erase speed
- Byte program time: 10µs typical
•
48-pin TSOP (Type 1)
•
Commercial Temperature Range
GENERAL DESCRIPTION
The EN29F800 is a 8-Megabit, electrically erasable, read/write non-volatile flash memory, organized
as 1,048,576 bytes or 524,288 words. Any byte can be programmed typically in 10µs. The
EN29F800 features 5.0V voltage read and write operation, with access times as fast as 45ns to
eliminate the need for WAIT states in high-performance microprocessor systems.
The EN29F800 has separate Output Enable (
OE
), Chip Enable (
CE
), and Write Enable (WE)
controls, which eliminate bus contention issues. This device is designed to allow either single (or
multiple) Sector or full chip erase operation, where each Sector can be individually protected against
program/erase operations or temporarily unprotected to erase or program. The device can sustain a
minimum of 100K program/erase cycles on each Sector.
4800 Great America Parkway, Suite 202
1
Santa Clara, CA 95054
Rev. E, Issue Date: 2001/07/05
Tel: 408-235-8680
Fax: 408-235-8685
51mcu
京公网安备 11010802033920号
EEWORLD
